Vestax PMC-07Pro Owner's manual

Vestax
Brand
Vestax
Model
PMC-07Pro
Type
Owner's manual

This manual is also suitable for

Vestax PMC-07Pro is a professional mixing controller that offers a range of features for DJs and audio engineers. The Vestax Digital Fader System, which consists of coils and a permanent magnet, provides durability and reliability even with heavy use. Unlike optical faders, the digital fader system is not affected by liquid spills or dust. The control of the fader curve by a complete digital signal system enables the creation of sharp edges in the curve pattern.

Vestax PMC-07Pro is a professional mixing controller that offers a range of features for DJs and audio engineers. The Vestax Digital Fader System, which consists of coils and a permanent magnet, provides durability and reliability even with heavy use. Unlike optical faders, the digital fader system is not affected by liquid spills or dust. The control of the fader curve by a complete digital signal system enables the creation of sharp edges in the curve pattern.

(a) CURVE PATTERN SWITCH
(b) C.F. FINE CONTROL
NORMAL NORMAL NORMAL
REVERSE
CURVE CURVE
I.F. REV. I.F. REV.C.F. REV.
PHONES
REVERSE REVERSE
PROFESSIONAL MIXING CONTROLLER
PGM 1 CROSS FADER PGM 2
PROFESSIONAL MIXING CONTROLLER
FUNCTIONS
The replacement crossfader unit for PMC-07ProD is
"CF-X".
"CF-05PRO", "CF-PCV" cannot be substituted in this
mixer.
OWNER'S MANUAL
Vestax Corporation
1-18-6 Wakabayashi, Setagaya-ku, Tokyo 154-0023 Japan
Phone 03-3412-7011 Fax 03-3412-7013
Vestax (Europe) Ltd.
Unit 5 Riverwey Industrial Park Alton Hampshire GU34 2QL England, U.K.
Phone (0)1420-83000 Fax (0)1420-80040
Web : www.vestax.co.uk
Vestax Technical Center of America
8489 W. Third Street Ste. 1044 Los Angleles, CA 90048
Phone (323)801-2111 Fax (323)801-2112
21
PHONES
MAX
LO MID H I
+6
-24
+12
0
-12
dB dB
LO H I LO MID H I
LINE
2
PHONO 2
MIN
MAXMIN MAXMIN
GAIN
REVERSE
NORMAL
EQ EQEQ
BALANCEPAN BALANCE
SUB MIC MAIN MIC
LRLRLR
MAX
MAX
MIN
MIN
MAX
MIN
PGM 2PGM 1
MAXMIN
MASTER
CUE
GAIN
POWER
LEVEL LEVEL
LEVEL
PGM 1
PGM REV
MIC MASTER
MONITOR SELECT
SESSION MIX
PGM 2
PGM 1 PGM 2
MONITOR LEVEL
C.F. MONITOR
+6
+3
0
-3
-6
-10
-20
LINE 1
PHONO 1
CURVE PATTERN
MAX
MIN
C.F. FINE
DIGITAL FADER CONTROL
1
2
3
4
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
PROFESSIONAL MIXING CONTROLLER
TOP PANEL
Curve pattern switch (a) selects the crossfader curve
pattern.
Setting the C.F. FINE CONTROL to minimum, the
crossfader curve is most sharp, moving the control
clockwise, towards max, gradually reduces the
sharpness of the curve (b).
FRONT PANEL
INPUT FADER CURVE adjustments for PGM1 + PGM2.
Thank you for purchasing the VESTAX PMC-07ProD. Please read this owner's manual carefully before you start to
use in order to understand fully how it to operate your new mixer.
CONGRATULATIONS!
FEATURES
The new Vestax Digital Fader System consists of coils and a permanent magnet.There is no contact between
these parts.Therefore, neither the element or magnet gets degraded or damaged even after hard usage.
Unlike an optical type fader, the digital fader system does not get effected even by liquid spills or dusts.
Control of the fader curve by a complete digital signal system, enabling creation of sharp edges in the curve
pattern.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
PRE-SET CURVE
SHAPE 1:
SHAPE 2:
SHAPE 3:
SHAPE 4:
C.F.POSITION
C.F.POSITION
C.F.POSITION
Using curve pattern switch,select the crossfader curve pattern from SHAPE1- 4,to set the cross-
fader pattern.
As this curve shape is very sharp, it is
used for hard scratch play.
Setting C.F. FINE CONTROL to
minimum, the curve sharp is most
sharp. As the switch moves closer to
max, the curve sharpness reduces.
This curve shape is "A" type curve.
In this position, switching C.F. FINE
CONTROL from MIN to MAX, the
crossfader curve shape changes
from slow slope curve to sharp slope
by 8 steps.
This curve shape is rectangle wave type. Moving the crossfader from right to left or from
left to right, it performs like a "transformer scratch". Switching C.F. FINE CONTROL, the 8
patterns crossfader curve shape can be selected. It enables selection of the 8 patterns of
curve shape as fig 1- fig 8 below.
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MAX
C.F. FINE CONTROL : MAX
C.F. FINE CONTROL : MAX
C.F.POSITION
fig-3 fig-4fig-1
C.F. FINE CONTROL : MIN
fig-8
C.F. FINE CONTROL : MAX
fig-7fig-6fig-5
fig-2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Vestax PMC-07Pro Owner's manual

Vestax
Brand
Vestax
Model
PMC-07Pro
Type
Owner's manual
This manual is also suitable for

Vestax PMC-07Pro is a professional mixing controller that offers a range of features for DJs and audio engineers. The Vestax Digital Fader System, which consists of coils and a permanent magnet, provides durability and reliability even with heavy use. Unlike optical faders, the digital fader system is not affected by liquid spills or dust. The control of the fader curve by a complete digital signal system enables the creation of sharp edges in the curve pattern.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents