LoD Offroad JSP1831 Installation guide

Brand
LoD Offroad
Model
JSP1831
Type
Installation guide

This manual is also suitable for

JL18FBSPSSINS - REV 1 03/16/18 Page 1
SIGNATURE
SERIES
SKIDPLATE
MID/FULLWIDTHSHORTY
SHORTY + MID/FULLWIDTH
First remove the crash bar, there are two bolts holding it on.
After the bolts are removed, you will shift the crash bar slightly up, then pull towards you
to remove the tabs out of the opening.
JL
1.
OR
JL18FBSPSSINS - REV 1 03/16/18 Page 2
Using the two holes indicated,
under the frame mounts,
mount the supplied crash bar.
It should look like this when complete.
(re-use the stock bolts)
3.
2.
JL18FBSPSSINS - REV 1 03/16/18 Page 3
HOLD UP THE SKID PLATE TO
THE BOTTOM OF THE BUMPER
AND SECURE IT IN PLACE USING
THE BOLTS AND WASHERS
PROVIDED. YOU WILL NEED A
9/16” SOCKET FOR THE JOB.
SECURE THE SKIDPLATE TO THE
LOWER CROSS MEMBER OF YOUR
JK JEEP USING THE BOLTS AND
WASHERS PROVIDED. YOU WILL
NEED A 9/16” SOCKET FOR THIS
JOB.
4.
5.
JL18FBSPSSINS - REV 1 03/16/18 Page 4
Shorty
Mid/Fullwidth
OR
JL18FBSPSSINS - REV 1 03/16/18 Page 5
3/8”x1” Hex Head
7/16” Washers
3/8” Nuts
(x6) (x4)
(x2)
Assembled By :
Date :
Signature Series Front
Skidplate Shipping Slip
*please check contents when
opening/assembling package
JL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

LoD Offroad JSP1831 Installation guide

Brand
LoD Offroad
Model
JSP1831
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents