ANSTEN K1 is a versatile Bluetooth headphone and transmitter set that allows you to enjoy wireless music and phone calls with ease. With Bluetooth 5.0 and aptX™ Low Latency technology, you can experience high-quality audio with minimal delay. The K1 also features a built-in microphone for hands-free calling and a long battery life of up to 28 hours of music playtime.
The included Bluetooth transmitter charging base lets you connect your non-Bluetooth devices, like your TV or PC, to the K1 headphones wirelessly. The transmitter supports multi-point connections, so you can connect two devices simultaneously and easily switch between them.
ANSTEN K1 is a versatile Bluetooth headphone and transmitter set that allows you to enjoy wireless music and phone calls with ease. With Bluetooth 5.0 and aptX™ Low Latency technology, you can experience high-quality audio with minimal delay. The K1 also features a built-in microphone for hands-free calling and a long battery life of up to 28 hours of music playtime.
The included Bluetooth transmitter charging base lets you connect your non-Bluetooth devices, like your TV or PC, to the K1 headphones wirelessly. The transmitter supports multi-point connections, so you can connect two devices simultaneously and easily switch between them.
Bluetooth Headphone with
Bluetooth Transmitter Charging
Base K1
User Manual
Bluetooth Headphone with
Bluetooth Transmitter Charging
Base K1
User Manual
Contents: 1. Product Overview: 2. Basic Operation 3. Bluetooth Pairing and Connection
1. Product Overview ---------------------------------------------------------------------- 2
2. Basic Operation ------------------------------------------------------------------------ 4
3. Bluetooth Pairing and Connection ------------------------------------------------- 5
4. AUX Wired Connection --------------------------------------------------------------- 6
5. LED Indicator --------------------------------------------------------------------------- 7
6. Charging---------------------------------------------------------------------------------- 8
7. TTS Tone -------------------------------------------------------------------------------- 9
8. Bluetooth Transmitter Charging Base ------------------------------------------- 9
8.1 Bluetooth transmitter operation ------------------------------------------------ 9
8.2 Bluetooth Pairing and Connection -------------------------------------------- 10
8.3 Connection with Two Devices ------------------------------------------------- 11
8.4 LED Indicator ---------------------------------------------------------------------- 12
8.5 Charging ---------------------------------------------------------------------------- 13
9.Product Specification ---------------------------------------------------------------- 14
9.1 Headphone Specification ------------------------------------------------------ 14
9.2 Bluetooth Transmitter Charging Base Specification ---------------------14
10. Attention and Q & A -----------------------------------------------------------------15
-1- -2- -3- -4- -5- -6- -7- -8-
Power Button
Charging
LED Indicator Volume +
Volume -
LED Indicator
MFB (Multi Function Button)
Charging
Base Charging
Port
Microphone
Micro USB
Charging Port
3.5mm AUX
3.5mm AUX Port
Power Buttont
Optical Input Port
Micro USB Charging Port
LED Indicator
Headphone Charging Port
MFB
(Multi Function
Button)
Package Contents:
A. K1 Bluetooth Headphone x 1
B. Micro USB Charging Cable x 1
C. K1 Bluetooth Transmitter Charging Base x 1
D. User Manual x 1
E. 3.5mm AUX Cable x 1
F. Optical Cable x 1
G. RCA Cable x 1
8.1 Bluetooth transmitter operation 8.2 Bluetooth pairing and connection
A. Switch to ON side, the K1 will power on and enter pairing mode with Red
and Blue LED flash alternately.
B. Search and click to connect “K1” on your phone Bluetooth lists, LED
turns to solid Blue LED after connected.
C. Control to answer/hang up a call, music play/ pause, previous/ next
song, volume up/ down etc through the MFB /Volume +/Volume- buttons.
D E F G
Button Function Operation
Power on In off status, switch to ON side to power on, it will enter pairing
mode automatically
Power off In on status, switch to OFF side to power off
Power
Button
Short press to pause / play music when playing music
Redial last phone call
Double press to redial the last phone call number
Play/pause
Answer a call Short press when call coming
Hang up a call Short press during a call
Reject a call Long press for 1 second to reject a call when call coming
MFB
Short press (There is a tone when the volume is at its maximum)
Next song Long press for 1 second
Volume up
Volume down Short press (There is a tone when the volume is at its minimum)
Previous song Long press for 1 second
Voice assistant In connected standby or music status, short press Volume - &
Volume + at the same time to turn on
Delete pairing record
Long press Volume - & Volume + at the same time for 5 seconds
Volume +
Volume -
Volume+
& Volume-
2connection
pairing
Search and connect
Search and click to connect “K1” on your phone
Bluetooth lists
Switch to ON side, K1 will power on and enter pairing
mode automatically with Red and Blue LED flash a
lternately.
4. AUX Wired Connection 5. LED Indicator
10. Attention and Q & A
6. Charging
Plug one end of 3.5mm cable in the 3.5mm AUX interface of headphone,
another end plug in phone or PC audio port. When the audio cable is
plugged in using the AUX function, the headphone button has no function.
The AUX function can also be used when the headphone battery has no
power.
Notes:
1. The buttons of headphone are invalid when AUX mode.
2. AUX function could be work when battery out of power or item power off.
3. Bluetooth function will power off when plug AUX cable.
4. The headphone can not power on while plugged AUX cable, need to pull
out the cable first then power on the headphone.
Status
Power on
Power off
Pairing
Unconnected standby mode
Connected standby mode
Playing music
Talking mode
Delete paired records
Charging
Full charged
Low battery
LED Indicator
Blue LED is on for 2 seconds
Red LED is on for 2 seconds
Blue and Red LED flash alternately
Blue LED flash once every 2 seconds
Solid Blue LED
Solid Blue LED
Solid Blue LED
Red and Blue LED is on for 2 seconds at the same time
Solid Red LED
Solid Blue LED
Red LED flash once every 10 seconds
8.4 LED Indicator 8.5 Charging
Status
Power off
Pairing
Reconnect
Standby
Delete pairing record
Connected
Multi point connections
Charging
Full Charged
LED Indicator
Without binding device, Blue LED flash twice.
With binding device, Blue LED is on for 5 seconds.
Red LED flash once
Blue and Red LED flash alternately
Blue LED flash once every second
Blue LED flash once every 2 seconds
Red and Blue LED is on for 2 seconds at the same time
Solid Blue LED
Solid Blue LED
Solid Red LED
Solid Green LED
7. TTS Tone
8. Bluetooth transmitter charging base
9.1 Headphone Specification:
9. Product Specification
Status
Power on
Power off
Enter pairing mode
Connected successful
Disconnect
Low voltage alert
TTS Tone
Power on
Power off
Pairing
Connected
Disconnected
Battery low
Bluetooth Version
Bluetooth Chipest
Operation Range
Bluetooth Profile
CODEC
Battery Capacity
Charging Time
Standby Time
Music Playing Time
Net Weight
Dimension
V5.0
QCC3034
10 meters
HSP, HFP, AVRCP, A2DP
aptX™ Low Latency, aptX™, AAC, SBC
600mAh/3.7V
About 2 hours
80 hours
About 28 hours70% volume
About 234g
193.3*160*80.3mm
Please charge the K1 at once when the Red LED flash. Charging time
about 2 hours. Blue LED turn on when full charged.
Connection for charging
1. Plug one end of micro USB cable to K1, another end to USB charger (
Car charger, power bank or PC etc )
2. Use Charging Base for charging, connect Micro USB charging cable to
Charging Base, place K1 Headphone on the Charging Base, Headphone’s
Red LED is on when is charging, Blue LED turn on when is full charged. (
When K1 transmitter is power on and use as the Charging Base for
charging, place K1 Headphone on the Charging Base, the K1 transmitter
will power off with Red LED flash once)
Notes:
1. Please charge the item at least once for every 2 months when without use.
2. Charge when power on, it is normal for the Bluetooth indicator will
overlapping with the charge indicator.
Charging with Power
Micro USB charging cable
Charging with PC
-9- -10- -11- -12- -13- -14- -15- -16- -17-
Function
Power on Plug in Micro USB charging cable to charging port, switch power button to
ON side
Power off Switch power button to OFF side; Plug out charging cable; Put the headphone
on it for charging will turn off the transmitter
Delete
pairing record
In pairing mode, double press MFB to clear the device information. If have no
binding device record, will enter paring mode automatically, If have binding
device record, will enter reconnect mode
Enter
pairing
mode
In unconnected standby or connected one device status, long press MFB for
5 seconds to enter paring mode. (When connected one device and enter
pairing mode, the first connected device is not affected and can be used
normally. Not work when in multi point connections, when the second device is
connected successfully will with temporarily bad working, please wait for 5 to
20 seconds for normal working.)
No connection in pairing mode, will keep pairing mode all the time
Operation
Binding device operation
1. First, delete the pairing record. Double press the MFB in pairing mode (
Because there is only one pairing record to perform the binding operation).
2. Pair and connect the binding device with K1.
3. After successfully connect with the headphone, double-click the MFB to
bind, and the blue LED flash 5 times after the binding is successful.
4. Replace the binding device when there is a binding record. After delete
the pairing record, bind the new device to K1 Transmitter after successful
connection, then the bind device record can be replaced.
5. After successfully binding the device information, K1 Transmitter
automatically re-power on and reconnects to the device. Reboot can
update the storage space and avoid new problems.
1. Plug in Micro USB charging cable to charging port, switch power button
to ON side to power on.
2. Enter pairing mode: Power on will enter pairing mode automatically;
Unconnected standby mode or connected one device, long press MFB
for 5 seconds to enter pairing mode.
3. Turn on the Bluetooth headphone or Bluetooth speaker, enter pairing
mode, place K1 Transmitter and the device close and wait for about 30
seconds, when Blue LED is on after connected.
4. Connect one end of 3.5mm AUX cable with K1, another end to phone or
PC, the headphone or speaker can be heard music from phone or PC.
8.3 Connection with Two Devices
1. Follow 8.2 to connect with the first device, long press MFB button for 5
seconds to enter pairing mode (The first connected device will work well).
2. Turn on the second device (Bluetooth headphone, speaker or receiver)
enter pairing mode, place it close with K1 Transmitter and wait for 30
seconds, K1 will connect the second device. After the device is
connected, you can hear music from it, this is the multi point connections.
(The first device will have music issue when connect to second device,
then it will be fine after few seconds)
*Priority support aptX™ low latency for one connection (Connected device
must support aptX™ low latency), support aptX™ low latency for two
connections if two devices priority support aptX™ low latency, support
aptX™ for two connections if two devices priority support aptX™, it will turn
to SBC if two devices CODEC is not the same like one support aptX™ low
latecy and another one support aptX™.
1. K1 Charging Base has no build-in battery, need power supply when use
as bluetooth transmitter or charging for headphone.
2. Charging connection
Plug one end of micro USB cable to K1 Charging Base, another end to
USB charger (Car charger, power bank or PC etc )
*1. When K1 transmitter is power on and use as the Charging Base for
charging, place K1 Headphone on the Charging Base, the K1
transmitter will power off with Red LED flash once
2. Please cut off the power supply if not use.
*If to use optical cable connection, please plug in the Optical input port.
Power on
Charging with Power
Micro USB charging cable
Charging with PC
Notes: The actual using time will be different according to the ambient and
music style.
9.2. Bluetooth Transmitter Charging Base Specification:
Bluetooth Version
Bluetooth Chipest
Operation Range
Bluetooth Profile
CODEC
Net Weight
Dimension
V5.0
CSR BC8670
Indoor barrier free 30 meters
A2DP
aptX™ Low Latency, Faststream, aptX™, SBC
About 145g
170*100*40.7mm
About K1 Headphone:
A. How to delete paired records?
Power on , long press “Volume - & Volume +“ buttons for 5 seconds at the
same time to delete paired records ( Red and Blue LED is on for 2 seconds
at the same time). Pls try to delete paired records when have connection
problems.
B. What’s the password for pairing?
Some devices require password for pairing, pls try 0000 (four zero), 8888
(four eight), 1111 (four one) or 1234 ( one two three four).
C. Which devices could charge for the headphone?
Any car charger, power bank, PC etc which meet DC 5V, charging current
more than 400mA could be charge for this item. And K1 Charging Base.
D. How to do if can not power or connection issue?
Please try charging reset, when power on, plug charging cable to charge
to reset and power off. (When power button switch to ON, reset will power
on automatically; When power button switch to OFF, reset will not power on)
Re-power on can use normally.
About K1 Bluetooth Transmitter Charging Base:
A. About reconnect
K1 can storage 4 devices information, and the excess will be replaced by
new device information (Why store 4 units? Because K1 will reconnect to
all paired devices after power on, and if there are too many, the re-
connection time will be too long) K1 waiting time for re-connection is: if one
device is paired, the re-connection time is about 10 seconds, and the re-
connection time for two devices is 12 seconds;
When there are pairing records, K1 will automatically connect to all
connected devices every time when power on (but only 2 devices can be
connected at the same time, and the bind device will be connected first
and then to the last connected device)
B. How to delete pairing record
In paring mode, double press MFB to clear the device information. If have
E. Why the headphone power off automatically?
K1 will power off under standby mode for over 10 minutes, or the battery
voltage is less than 3.1V.
F. Disconnect (Out of valid connection range)?
When headphone and transmitter are out of valid connection range,
headphone will enter Linkloss mode (Indicator is still connected, headphone
will reconnect last device every 15 seconds), will enter paring mode if
reconnect fail for over 10 minutes.
no binding device record, will enter paring mode automatically, If have
binding device record, will enter reconnect mode
C. How to select SPDIF/AUX
The default power on status is optical mode, and it will automatically switch
to AUX mode when the AUX audio cable is inserted.
D. How to charge for the charging base
The charging base has no build-in battery, need power supply when use as
bluetooth transmitter or charging for headphone.
E. How to do if can not power on or dead when connect?
Please try reset and power on, and delete the pairing record.
Customer Service
Free user support:
We offer telephone, email and live online support. Your email is guaranteed
to be replied to within 1 working day, and is normally responded to even
faster than that!
Ansten support site also provides complete step-by-step instructions and
answers to FAQ online.
Online Video User Guides
We have clear video user guides for most of our products, which you can
find on video sites. You can search on youtube: “Ansten TV headphone”
Contact us:
Email: [email protected]
site: www.ansten.net
3.5 mm AUX cable 3.5 mm AUX cable
3.5 mm AUX cable 3.5 mm AUX cable
尺寸：110X120mm
材质：128克双铜纸双面单色印刷 不做表面处理 折叠（手风琴式）
封面
-
1
ANSTEN K1 is a versatile Bluetooth headphone and transmitter set that allows you to enjoy wireless music and phone calls with ease. With Bluetooth 5.0 and aptX™ Low Latency technology, you can experience high-quality audio with minimal delay. The K1 also features a built-in microphone for hands-free calling and a long battery life of up to 28 hours of music playtime.
The included Bluetooth transmitter charging base lets you connect your non-Bluetooth devices, like your TV or PC, to the K1 headphones wirelessly. The transmitter supports multi-point connections, so you can connect two devices simultaneously and easily switch between them.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Avantree BTHS-AS9P User manual
-
-
AVLink BNC90 User manual
-
Minelab ML80 User manual
-
-
Inateck BR1008 User manual
-
Inateck BR1006 User manual
-
-
-
Kygo Life Kygo A4/300 User manual
