VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282|F: +886-2-82455532|E: [email protected]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686|F: 408-773-8298|E: [email protected]
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T: +31(0)36-5298-434 E: [email protected]
LED
Ground screw
PoE Out
PoE Switch
PoE In
* Make sure the grouning
resistance is lower than
0.5Ω.
< 1 meter
PoE Out
PoE In
#1
#2
1. Use CAT5e or CAT6 UTP/STP cables.
2. The cabling distance between the surge protector and the protected device should be less than 1 meter.
AT-PSP-001 PoE Surge Protector
Model Description
AT-PSP-001 10/100/1000BaseT surge protector agasint lightning or transcient voltage
IMPORTANT:
INTRODUCTION
CONNECTION
* 1x surge protector * 1x Quick Installation Guide
PACKAGE CONTENTS
All specications are subject to change without noice.
Copyright © 2016 VIVOTEK INC. All rights reserved.
Quick Installation Guide
LEDs
LED denitions:
OFF when operating normally, ON when out of service life.
/