Moen 87427MSRS Specification

Type
Specification

This manual is also suitable for

FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Flexible supplies with 3/8" compression fittings
Includes traditional side spray with quick connect system
OPERATION
Lever style handle
Operates with less than 5 lbs. of force
FLOW
Aerator is limited to 1.5 gpm max (8.3 L/min)
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
Nonmetallic/nonferrous and stainless steel material
STANDARDS
Third party certified to IAPMO Green ASME A112.18.1/CSA B-125.1 and
all applicable requirements referenced therein including NSF 61/9
Meets CalGreen and Georgia SB370 requirements
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Single Handle Lever Kitchen Faucet
with Side Spray
Models: 87427 series
11-1/8"
(283mm)
10-7/8"
(277mm)
1/2"
(13mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
2-3/16"
(56mm)
2-1/4" (57mm)
MAX DECK
THICKNESS
6-11/16"
(170mm)
5-1/2"
(140mm)
2"
(51mm)
12-1/8"
(308mm)
29-1/2"
(750mm)
2-5/16"
(58mm)
1-1/4" (32mm)
THRU HOLE
1-1/2" (38mm)
THRU HOLE
Rev. 10/13
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 4 HOLES 1-1/4" (32mm) MIN. DIA. AND
4" (102mm) ON CENTER.
Also has single hole mount capability.
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
  • Page 1 1

Moen 87427MSRS Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI