Hagerco 9673 Series and 9674 Series - Heavy Duty Aluminum - Track Installation guide

Type
Installation guide
Sliding Door Hardware 9673 & 9674 - By-Pass
Installation Instructions
I-SD00319
Rev 1, Rev Date: 7/12/17 Component Number (If required) Page 1 of 2
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com
1 PREPARE OPENING
OPENING HEIGHT MAX = DOOR HEIGHT + 2-1/2
OPENING HEIGHT MIN = DOOR HEIGHT + 2-1/4”
CONTENTS
9673
9674
1. TRACK (9820)
2. CARRIER
3. QUICK RELEASE PLATE (9610)
4. FLOOR GUIDE (9353)
5. #8 X 5/8” PTHS
6. #8 X 3/4” PPHS
7. #8 X 1-1/2” PPHS
8. #8 X 1” PPHS
9. DOORSTOP (9880)
(sold separately)
10. PULL
(Sold separately)
1
4 (9605)
1
1
16
2
3
16
1
2
1
4 (9606)
1
2
16
2
3
16
1
2
10.
4.
3.
1.
2.
6.
5.
8.
Sliding Door Hardware 9673 & 9674 - By-Pass
Installation Instructions
I-SD00319
Rev 1, Rev Date: 7/12/17 Component Number (If required) Page 2 of 2
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com
2 INSTALL TRACK AND HANGERS
Center track in opening and secure with (#8 x 5/8”) screws
Leave a 1” gap between right end of track and door frame to
allow for carrier removal
Center quick release plates on door thickness
Mount left plate edge 1” from near left door edge
Mount right plate edge 2-3/4”” from right door edge
Secure Carriers onto door with (#8 x 1”) screws
3 HANG DOORS
4 ADJUST AND FINISH
Open quick release latches on brackets
Slide door onto carrier screws and close hatch
Repeat for front door on front rail
Adjust carriers so door is square with frame
Install door guides in center of opening, where
doors overlap
Drill appropriate dimensioned hole to mount
door pull (optional)
Install stops (optional)
  • Page 1 1
  • Page 2 2

Hagerco 9673 Series and 9674 Series - Heavy Duty Aluminum - Track Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI