Black & Decker FP550 User manual

Page is loading ...

2

English 7

Italiano 12

EÏÏËÓÈÎ· 18

Türkçe 24

Copyright Black & Decker

Page is loading ...

7

ENGLISH

FOOD PROCESSOR FP550/FP600

Thank you for choosing Black & Decker. We hope

that you will enjoy using this product for many years.

OVERVIEW (fig. A-G)

1. Electronic speed selector

2. Auto clean button

3. Upper power outlet hood

4. Upper power outlet

5. Lid locking slot

6. Lower power outlet

7. Motor unit

8. Food pusher with measuring section

9. Lid with feeder tube

10.Processor bowl

11.Metal blade

12.Plastic mixing blade

13.Whisk attachment

14.Grating/slicing discs

15.Disc holder

16.Large juicing cone

17.Small juicing cone

18.Juicer filter basket

19.Lid (FP600 only)

20.Grinding mill (FP600 only)

21.Lid stopper (FP600 only)

22.Lid (FP600 only)

23.Blender attachment (FP600 only)

EC DECLARATION OF CONFORMITY

FP550/FP600

Black & Decker declares that these

products conform to:

98/37/EC, 89/336/EEC, 73/23/EEC,

EN 55014, EN 60335, EN 61000

L

pA

(sound pressure) dB(A) 77

Hand/arm weighted vibration value m/s

2

< 2.5

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG,

United Kingdom

INTENDED USE

Your Black & Decker food processor has been

designed for preparing food and beverage

ingredients as described in this manual.

This product is intended for household use only.

WARNING SYMBOLS

The following symbols are used in this manual:

Denotes risk of personal injury or damage

to the product in case of non-observance

of the instructions in this manual.

Denotes risk of electric shock.

IMPORTANT SAFEGUARDS

◆ Warning! When using mains-powered

appliances, basic safety precautions, including

the following, should always be followed to

reduce the risk of fire, electric shock and

personal injury.

◆ Read this entire manual carefully before using

the appliance.

◆ The intended use is described in this manual.

The use of any accessory or attachment or the

performance of any operation with this

appliance other than those recommended in

this instruction manual may present a risk of

personal injury.

◆ Retain this manual for future reference.

8

ENGLISH

Using your appliance

◆ Do not touch moving parts.

◆ Make sure that the appliance is switched off

before connecting to or disconnecting from

the power supply.

◆ Handle the blades carefully; they are extremely

sharp.

◆ Remove the blades before emptying the bowl

of its contents.

◆ Always use the pusher to push food down the

feeder tube; never use your fingers, a fork,

a spoon, a knife or any other utensil.

◆ Never operate the appliance while empty.

◆ Always take care when using the appliance.

◆ Never pull the power supply cord to

disconnect the plug from the socket. Keep the

power supply cord away from heat, oil and

sharp edges. Do not allow the power supply

cord to hang over the edge of your work top

or table.

◆ Do not place the appliance on or near heat

sources or in a heated oven.

◆ Do not use the appliance near flammable or

explosive materials.

◆ Do not use the appliance outdoors.

◆ Always protect the motor unit from water or

excessive humidity.

◆ Operate the appliance only with dry hands.

◆ If the power supply cord is damaged during

use, disconnect the appliance from the power

supply immediately. Do not touch the power

supply cord before disconnecting from the

power supply.

◆ Disconnect the appliance from the power

supply when not in use, before fitting or

removing parts and before cleaning.

◆ Always place the appliance on a level surface

with adequate free space on all sides.

Safety of others

◆ Do not allow children or any person unfamiliar

with these instructions to use the appliance.

◆ Do not allow children or animals to come near

the work area or to touch the appliance or

power supply cord. Close supervision is

necessary when the appliance is used near

children.

After use

◆ Switch the appliance off and remove the plug

from the socket before leaving it unattended

and before changing, cleaning or inspecting

any parts of the appliance.

◆ When not in use, the appliance should be stored

in a dry place. Children should not have access

to stored appliances.

Inspection and repairs

◆ Before use, check the appliance for damaged

or defective parts. Check for breakage of parts

and any other conditions that may affect its

operation.

◆ Do not use the appliance if any part is damaged

or defective.

◆ Have any damaged or defective parts repaired

or replaced by an authorised repair agent.

◆ Before use, check the power supply cord for

signs of damage, ageing and wear.

◆ Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

◆ If the power supply cord or mains plug is

damaged or defective it must be repaired by

an authorised repair agent in order to avoid a

hazard. Do not cut the power supply cord and

do not attempt to repair it yourself.

◆ Never attempt to remove or replace any parts

other than those specified in this manual.

ELECTRICAL SAFETY

◆ Before use, check that the mains voltage

corresponds to the voltage on the rating plate.

This appliance is double insulated in

accordance with EN 60335; therefore no

earth wire is required.

To avoid the risk of electric shock, do not

immerse the cord, plug or motor unit in

water or other liquid.

ASSEMBLY

Processor bowl (fig. H)

The processor bowl can be used to mix, blend,

chop or knead large quantities of food.

◆ Close the upper power outlet hood.

9

ENGLISH

◆ Place the bowl onto the lower power outlet so

that the unlocked padlock symbol aligns with

the arrow. Rotate the handle to the right until

the bowl is locked into position and the locked

padlock symbol aligns with the arrow.

◆ Slide the required accessory onto the spindle.

◆ Place the ingredients into the bowl.

◆ Place the lid onto the bowl with the feeder

tube to the right of the lid locking slot.

◆ Rotate the lid counter-clockwise, while holding

down the upper power outlet hood, until the

lid locks into the lid locking slot.

The food processor will not operate if the lid is not

correctly locked into position.

Citrus juicer (fig. I)

◆ Check that the upper power outlet hood is

closed.

◆ Place the bowl onto the lower power outlet so

that the unlocked padlock symbol aligns with

the arrow. Rotate the handle to the right until

the bowl is locked into position and the locked

padlock symbol aligns with the arrow.

◆ Place the filter basket onto the bowl with the

locking spur on the basket to the right of lid

locking slot.

◆ Rotate the basket counter-clockwise until the

spur locks into the locking slot.

◆ Fit the cone into the hole in the filter basket.

◆ For large pieces of fruit, place the large cone

over the smaller cone.

Blender attachment (fig. J) (FP600 only)

Use the blender attachment for fine blending of

raw ingredients and blending of cooked

ingredients to a very smooth consistency.

◆ Raise the upper power outlet hood.

◆ Place the ingredients into the blender jug.

◆ Lock the lid by aligning the locked padlock

symbol with the arrow. The spur on the lid

must be fit into the locking slot on the top of

the jug’s handle.

◆ If the lid is not properly positioned, the appliance

will not operate.

◆ Once the blender jug and lid are locked into

place on the motor unit, the lid cannot be

removed.

◆ Place the blender onto the upper power outlet

with the unlocked padlock symbol aligned with

the arrow. Rotate the jug counterclockwise so

that the locked padlock symbol and the arrow

are aligned. The jug is now in the proper

position.

◆ To remove the jug, rotate clockwise.

Grinding attachment (fig. K) (FP600 only)

Use the grinding mill for fine chopping or grinding

of small pieces. The grinding mill is ideal for nuts,

coffee, herbs and spices.

◆ Raise the upper power outlet hood.

◆ Place the ingredients in the mill and lock the

lid into position.

◆ Place the grinding mill onto the upper power

outlet with the unlocked padlock symbol aligned

with the arrow.

◆ Turn the mill counter-clockwise until the locked

padlock symbol is aligned with the arrow.

The mill is now in position.

◆ To remove, turn the mill clockwise

USE

Do not run the appliance for periods in

excess of 3 minutes (whisk, citrus juicer) or

2 minutes (other attachments).

Operating the appliance

◆ Fit the desired attachment.

◆ Plug the appliance in.

◆ Switch the appliance on: Rotate the dial to

select the desired speed setting (1- 5).

The setting can be varied during processing.

For greater control, rotate the dial to the P position

for pulse control, which will permit intermittent

bursts of power.

◆ Switch the appliance off: Rotate the dial to the

‘0’ position.

Please be aware of the following safety

features when operating the appliance:

◆ When using the lower power outlet: The upper

power outlet hood must be locked into place

and the processor lid must be locked into the

lid locking slot.

10

ENGLISH

◆ When using the upper power outlet (FP600 only):

The processor bowl must be in place with the

lid locked while using the blender or the

grinding mill.

Processor bowl

The processor bowl can be used with the

following accessories:

◆ Chopping blade

◆ Grating/slicing discs

◆ Whisk attachment

◆ Mixing blade

Chopping (fig. L)

◆ Use the metal chopping blade.

◆ Set the speed to 5. For greater control, use the

pulse button.

◆ You can chop up to 500 g of raw or cooked

meat, fish, vegetables, etc.

Blending (fig. L)

◆ Use the metal chopping blade.

◆ Select a speed between 3 and 5.

◆ You can blend up to 1 litre of soup,

stewed fruit, etc.

Mixing/kneading (fig. L)

◆ Use the plastic mixing blade.

◆ Set the speed to 5.

◆ You can mix up to 1 kg of pastry, dough,

cake mixture, batter, biscuit mix, etc.

Beating & whisking (fig. L)

◆ Use the whisk attachment.

◆ Select a speed between 1 and 5 depending on

the consistency of the food.

◆ Never use the whisk attachment to knead

dough or to mix cake mixtures.

◆ You can use the whisk attachment to prepare

up to 0.5 litres of mayonnaise, sauce, whipped

cream, etc.

Grating & slicing (fig. M)

◆ Select the required slicing disc.

◆ Fit the slicing disc into the disc holder.

◆ Use the pusher to feed food into the feeder

tube.

◆ Select a speed between 2 and 5 to start.

◆ The slicing/grating discs can slice and grate

vegetables up to 500 g.

Citrus juicer

◆ Cut the citrus fruit in half across the middle

(not end to end).

◆ Place one half of a citrus fruit onto the cone.

◆ Set the speed to 1 to start the machine.

You can press up to 1 litre of juice before emptying

the bowl.

Blender attachment (FP600 only)

◆ Select a speed between 1 and 5 to start

blending. For greater control, use the pulse

button.

◆ During blending, ingredients can be added

using the slot in the lid stopper.

◆ Never fill the blender jug with boiling liquid.

You can blend up to 1.2 litres of extra smooth

soup, sauce, cream, fruit purée, milkshake,

cocktail, or batter.

Grinding attachment (FP600 only)

◆ Set the speed to 5 to start the appliance.

◆ For greater control use the pulse button.

◆ You can chop or grind up to 100 g of

ingredients.

Autoclean function

◆ Pour warm, soapy water into the blender jug,

grinding mill or processor bowl.

◆ Secure the lid and locate the jug, mill or bowl

onto the correct power outlet.

◆ Press the Autoclean button several times.

◆ Once the unit is clean, pour out the soapy

water and rinse thoroughly.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, switch

the appliance off and remove the plug

from the socket.

◆ Remove the bowl by turning it clockwise.

◆ Wash and dry the accessories (they are all

dishwasher proof except for the whisk).

11

ENGLISH

◆ If the accessories have become discoloured by

food (carrots, oranges, etc.) rub gently with a

cloth dipped in cooking oil and then wash as

normal.

Do not place the motor unit in or near

running water. Wipe with a damp cloth.

TROUBLESHOOTING

◆ Check that the appliance is properly plugged in.

◆ Check that the accessories are properly locked

onto the motor unit.

◆ Check that the lids are secured properly.

◆ When using the processor bowl, check that the

upper power outlet hood is properly closed.

◆ When using the upper power outlet (FP600

only), check that the processor bowl and lid are

correctly locked into position.

PROTECTING THE ENVIRONMENT

Black & Decker provides a facility for

recycling Black & Decker products once

they have reached the end of their

working life. This service is provided free

of charge. To take advantage of this

service please return your product to any

authorised repair agent who will collect

them on our behalf.

You can check the location of your nearest

authorised repair agent by contacting your local

Black & Decker office at the address indicated in

this manual. Alternatively, a list of authorised

Black & Decker repair agents and full details of our

after-sales service and contacts are available on

the Internet at: www.2helpU.com.

GUARANTEE

Black & Decker is confident of the quality of its

products and offers an outstanding guarantee.

This guarantee statement is in addition to and in no

way prejudices your statutory rights. The guarantee

is valid within the territories of the Member States

of the European Union and the European Free

Trade Area.

If a Black & Decker product becomes defective

due to faulty materials, workmanship or lack of

conformity, within 24 months from the date of

purchase, Black & Decker guarantees to replace

defective parts, repair products subjected to fair

wear and tear or replace such products to ensure

minimum inconvenience to the customer unless:

◆ The product has been used for trade,

professional or hire purposes;

◆ The product has been subjected to misuse or

neglect;

◆ The product has sustained damage through

foreign objects, substances or accidents;

◆ Repairs have been attempted by persons other

than authorised repair agents or Black & Decker

service staff.

To claim on the guarantee, you will need to submit

proof of purchase to the seller or an authorised

repair agent. You can check the location of your

nearest authorised repair agent by contacting your

local Black & Decker office at the address

indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full

details of our after-sales service and contacts are

available on the Internet at: www.2helpU.com.

Page is loading ...

Black & Decker FP550 User manual

This manual is also suitable for

Black & Decker FP550 User manual

in other languages

Related papers

Other documents