SPEAKER WITH BLUETOOTH
®
TSBT 100
INSTRUCTION MANUAL
SVENSKA | ENGLISH
Page is loading ...
INNEHÅLL | CONTENT
SVENSKA
Säkerhetsinstruktioner 4-5
Överblick 6-7
Användning 8-10
Felsökning 11
Specifikationer 11
Övrigt 12
ENGLISH
Safety Instructions 14-15
Overview 16-17
Operation 18-20
Troubleshooting 21
Specifications 21
Other 22
Page is loading ...
Page is loading ...
6 | SVENSKA
ÖVERBLICK
On
Off
Main Power
230 V
Battery
12 V
Input Power
AC 230 V, 50 Hz
20 W
Model: TSBT 100
AC input: 230 V, 50 Hz
DC input: 12-30 V, 5 A
Battery type: 12 V, 2300 mAh
Output power: 15 W RMS
SN:
Made in P.R.C
Imported by: 556520-4137
Företagsgatan 69
504 64 Borås
Sweden
DC 12 V - 30 V
L R
Audio Input
100 Hz 500 Hz 1 KHz 5 KHz 10 KHz
Equalizer
Guitar VolumeGuitar Input Mic Volume
Mic In Power
Charge
Karaoke
Mic echo
On Off
Volume
AUX
USB CHARGE
Input
1
9
10
11
12
13
14
16
15
17
5
6
7
8
2 3 4
23 24
21
22
18
19
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
14 | ENGLISH
• The lightning flash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of un-insulated ‘dangerous voltage’
within the products enclosure that may be sufficient
magnitude to constitute a risk of electric shock to the
persons.
• The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
• Warning: To reduce the risk of electric shock, do
not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personnel.
• Before you connect the appliance: Ensure the
voltage rating on the type plate corresponds to your
mains voltage (type plate is located on the back of
the unit).
• This equipment is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities or lack of experience or
knowledge. They should be given appropriate
supervision and instructions to use the equipment by
a person responsible for their safety.
• Ensure the equipment is not too close to heat
emitting appliances or placed in direct sunlight.
• Do not immerse the equipment in water or any other
liquids.
• This product is not a toy. Never leave the equipment
within reach of children. Close supervision is
required when using this equipment near children.
• Repairs to electrical appliances should only be
performed by qualified personnel.
• Improper repairs may place the user and/or
equipment at serious risk.
• This equipment is intended for household use only
and should not be used for industrial or commercial
purposes.
• Do not operate this appliance with a damaged
plug or cord, after a malfunction or after being
dropped or damaged in any way.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Do not use this equipment for anything other than its
intended use.
SAFETY INSTRUCTIONS
ENGLISH | 15
• Do not push objects into any openings as damage
to the equipment and/or electric shock may occur.
• Do not play music at excessive levels, especially
near children.
SAFETY INSTRUCTIONS
16 | ENGLISH
OVERVIEW
On
Off
Main Power
230 V
Battery
12 V
Input Power
AC 230 V, 50 Hz
20 W
Model: TSBT 100
AC input: 230 V, 50 Hz
DC input: 12-30 V, 5 A
Battery type: 12 V, 2300 mAh
Output power: 15 W RMS
SN:
Made in P.R.C
Imported by: 556520-4137
Företagsgatan 69
504 64 Borås
Sweden
DC 12 V - 30 V
L R
Audio Input
100 Hz 500 Hz 1 KHz 5 KHz 10 KHz
Equalizer
Guitar VolumeGuitar Input Mic Volume
Mic In Power
Charge
Karaoke
Mic echo
On Off
Volume
AUX
USB CHARGE
Input
1
9
10
11
12
13
14
16
15
17
5
6
7
8
2 3 4
23 24
21
22
18
19
20
ENGLISH | 17
OVERVIEW
TOP PANEL:
1. Equalizer: Use the five levers to adjust the frequency and set
the sound according to your preferences.
2. AUX/USB indicator
3. USB port: Charge mobile devices.
4. : Bluetooth indicator
5. Input: Select an audio source.
6. : Play the next track.
7. : Play/Pause the music.
8. : Go back to previous track.
9. Guitar input: Electric guitar connection.
10. Guitar volume: Adjust the volume of an electric guitar.
11. Mic echo: Receiver reverberation depth adjustment.
12. Mic volume: Microphone volume adjustment.
13. Karaoke On/Off: Microphone priority function switch. When
a microphone is inserted to the Mic in jack, you can press
this button to reduce the music volume and highlight the
vocals when talking/singing by Mic.
14. Mic in: Microphone connection.
15. Power indicator
16. Main volume control: Adjust the volume.
17. Charge indicator
BACK PANEL:
18. Main power switch
19. Input power switch: Choose 230 V or Battery/12 V.
20. AC 230 V In
21. Audio input: Connect an audio source via AUX cable.
22. DC 12 V In
CABLES:
23. Power cord (230 V)
24. AUX cable
18 | ENGLISH
OPERATION
GET STARTED:
1. Place the speaker on a flat and stable surface.
2a. Connect the included power cord and set the Input power
switch (19) to ‘230 V’ to power the speaker via
a wall outlet.
2b. Set the Input power switch (19) to ‘Battery/12 V’ to power
the speaker via a 12 V source or the battery.
3. Turn the main power on by setting the Main power switch
(18) to ‘On’.
4. Press the ‘Input’ (5) button to select an audio input
(Bluetooth, AUX). The corresponding indicator will
illuminate as you select an audio input. Follow the
instructions for the different inputs in the paragraphs
‘Bluetooth Input’ and ‘AUX Input’ on page 19-20.
5. Connect the plug of the guitar cable to the Guitar input
(9), and/or the plug of the microphone cable to Mic in
(14) to use the speaker as an amplifier. Read more in the
paragraph ‘Guitar Input and Microphone Input’ on page
20.
6. After operation, turn off the speaker by setting the Main
power switch (18) to ‘Off’.
CHARGING THE SPEAKER:
1. Connect the included power cord (23) to 230 V In (20),
and in to a wall outlet.
2. Turn off the Main power switch (18).
Note: You can charge the speaker with main power in
either the On or Off mode but we recommend the Off
mode as it charges faster.
3. Press the Input power switch (19) to ‘230 V’.
4. The Charge indicator (17) illuminates while charging, and
turns off once the battery is fully charged.
Note: Charging time is up to 8 hours.
ENGLISH | 19
OPERATION
BUTTONS:
Button Description
Press to turn on or off the main
power (must be on for both 230 V
and Battery/12 V power).
Set to ‘230 V’ if you want to power
the speaker via a wall outlet.
Set to ‘Battery/12 V’ to power the
speaker via either battery or a
12 V source.
BLUETOOTH INPUT:
1. Press the ‘Input’ (5) button until the Bluetooth indicator (4)
flashes in blue. The speaker goes into pairing mode.
2. Turn on the Bluetooth function on your mobile device.
3. Search and select ‘TSBT 100’ to pair. If your mobile device
requires a password to pair, enter ‘0000‘.
Note: If your mobile device cannot find the speaker, restart
the Bluetooth function in the device.
4. After a successful pairing, the speaker will say ‘Bluetooth is
connected’ and the Bluetooth indicator (4) will illuminate in
blue.
Note: If you use a phone as an audio source and receive
a phone call during playback, the phone call will not be
played through the speaker.
Note: If the Bluetooth connection becomes weak during
operation, the speaker will automatically try to re-connect to
your mobile device.
5. Control the playback and the volume via your connected
mobile device and the buttons (6, 7, 8) and Main volume
control (16) on the speaker.
6. To disconnect the speaker from your mobile device, turn off
its Bluetooth function.
Note: The speaker will automatically re-connect to the latest
connected mobile device once it is started again. If you
want the speaker to connect to a different unit, turn off the
Bluetooth function on the previously connected device.
20 | ENGLISH
OPERATION
AUX INPUT:
1. Connect the included AUX cable to the Audio input (21)
on the back of the speaker. Connect the other end to the
audio source.
2. Set the mode to AUX by pressing the ‘Input’ (5) button until
the AUX indicator (2) illuminates in blue and the speaker
says ‘Music’.
3. Start playing music from the connected device. Control the
music via your audio source and control the volume via
the audio source or the Main volume control (16) on the
speaker.
Note: If you use a phone as audio source and receive a
phone call during playback, the phone call will not be
played through the speaker.
4. To disconnect the AUX connected source, change the
audio input of the speaker. You can also turn off the
playback on your audio source and disconnect the AUX
cable from the AUX in port.
USB CHARGE PORT (5 V, 500 MA):
´ Connect the USB cable of your mobile device to the USB
port on the top panel of the speaker, and charge the
battery of your mobile device.
GUITAR INPUT AND MICROPHONE INPUT:
1. Connect the plug of the guitar cable to the Guitar input (9),
and/or the plug of the microphone cable to Mic in (14) to
use the speaker as an amplifier.
2. You can play music via any of the audio inputs (Bluetooth,
AUX) while using the speaker as an amplifier for your
guitar/microphone.
Note: There is a microphone priority function switch
(Karaoke On/Off, 13). When a microphone is inserted to
the Mic in jack (14), you can press this button to reduce
the music volume and highlight the vocals when talking/
singing by Mic.
3. Control the volume of the guitar with the Guitar volume
control (10), and the volume of the microphone with the
Mic volume control (12).
ENGLISH | 21
TROUBLESHOOTING
SPECIFICATIONS
Problem Solution
Input signal is
clipping
Try reducing the input gain/the volume
control on your audio source device.
Output signal
is clipping
Lower the main volume level.
Sound quality
is poor
Lower the main volume level. The sound is
easily distorted at a very high volume.
Cannot
charge the
speaker
Ensure the Input power switch (20) is set to
‘230 V’.
No audio via
Bluetooth
Check if the units are paired.
If not, re-pair them.
Increase the volume on the speaker and the
connected/paired unit.
Speaker
cannot pair
Ensure the unit is turned on.
Ensure Bluetooth function is on, on both
speaker and the mobile device.
Product name TSBT 100
AC input 230 V, 50 Hz
DC input 12 V, 5 A
Output power 15 W RMS
Battery type Lead-acid rechargeable battery, 12 V,
2300 mAh
Frequency response 60 Hz - 19 KHz
Impedance 4 Ω
Speaker size 8” subwoofer
0.5” tweeter
Charging time Up to 8 hours
Playback time Up to 6 hours
USB output 5 V, 500 mA
Equalizer 100 Hz, 500 Hz, 1 kHz, 5 kHz, 10
kHz – ± 8 dB
Bluetooth version 2.1 + EDR
Bluetooth profiles A 2D P, AV RC P
Bluetooth range 10 m
Dimensions 480 x 280 x 245 mm
Weight 6.9 kg
22 | ENGLISH
OTHER
COPYRIGHT:
This manual is the copyright of CI no 556520-4137. No part
of this manual may be revised, copied or transmitted in any
way without written permission from CI no 556520-4137.
RECYCLING:
This product’s packaging materials are recyclable
and can be reused. This product and the accessories
packed together are the applicable product to the WEEE
directive. Please dispose of any materials in accordance
with your local recycling regulations. When discarding
the unit, comply with your local rules or
regulations.
LAW AND SAFETY:
The CE mark indicates that this product has been
manufactured according to current regulations for
electromagnetic fields, which means that it is safe
to use if used according to safety instructions. The product is
manufactured according to current regulations within the EU
legislation, limiting the use of hazardous substances in electrical
and electronic equipment.
STATEMENT:
This manual does not provide any warranty or related
declarations. All information in this manual including the product
specification, pictures and literatures is just for reference, CI no
556520-4137 reserves the rights to
update contents of this manual without further notice.
BLUETOOTH:
Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG Inc and any use of such marks by
Andersson is under license.
Page is loading ...
Page is loading ...
/