OUTDOOR SPEAKER
BTS1200
INSTRUCTION MANUAL
SVENSKA | ENGLISH
MILJÖ
Waste of Electrical and Electronic Equipment (WEEE)
- WEEE-direktivet 2012/19/EU
Den här symbolen på produkten eller i instruktionerna betyder att
den elektriska och elektroniska utrustningen ska slängas separat
från annat hushållsavfall när den inte fungerar längre. Inom EU finns
separata återvinningssystem för avfall. Kontakta lokala myndigheter
eller din återförsäljare för mer information.
LAG OCH SÄKERHET
Detta märke finns på produkten och i manualen för att visa att
den uppfyller de europeiska säkerhets- och elektromagnetiska
kraven. Denna produkt är tillverkad enligt gällande regler för
elektromagnetiska fält (EMF), vilket innebär att den är säker att
använda så länge säkerhetsanvisningarna följs. Produkten är
tillverkad enligt gällande EU-lagstiftning, som begränsar användning
av skadliga ämnen i elektriska och elektroniska produkter (Europa-
parlamentets och rådets direktiv 2011/65/EU).
FÖRBEHÅLL
Vi förbehåller oss rätten att justera eventuella tryckfel samt fort-
löpande ändra och förbättra produkten och medföljande material.
ENVIRONMENT
Waste of Electrical and Electronic Equipment (WEEE)
- WEEE Directive 2012/19/EU
This symbol on the product or in the instructions means that the
electrical and electronic equipment must be disposed of separately
from other household waste when it does not work anymore. The EU
has separate waste collection systems, contact your local dealer or
authority for more information.
LAW AND SAFETY
This product has been manufactured according to current regulations
for electromagnetic fields (EMF), which means that it is safe to use if
used according to safety instructions. The product is manufactured
according to current regulations within the EU legislation, limiting the
use of hazardous substances in electrical and electronic equipment
(RoHS Directive 2011/65/EU).
RESERVATIONS
We reserve the right to correct any typographical errors, and reserve
the right to make ongoing changes and improvements to the product
and related materials.
SVENSKA
Säkerhetsföreskrifter .................................................4-5
Specifikationer ......................................................... 5
Delar ...................................................................6-7
Installation ............................................................. 8-9
Användning ............................................................. 9
ENGLISH
Safety Precautions ................................................10 -11
Specifications .........................................................11
Parts .................................................................12-13
Installation ..........................................................14-15
Operation .............................................................. 15
INNEHÅLL | CONTENT
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
10 | ENGLISH
SAFETY PRECAUTIONS
•
The lightning flash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of un-insulated “dangerous voltage”
within the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to the
persons.
•
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
• Warning: To reduce the risk of electric shock, do not
remove cover. No user serviceable parts inside. Refer
servicing to qualified service personnel.
•
This equipment is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities or lack of experience or
knowledge. They should be given appropriate
supervision and instructions to use the equipment by
a person responsible for their safety.
•
Ensure the equipment is not too close to heat emitting
appliances or placed in direct sunlight.
•
Before you connect the appliance: Ensure the voltage
rating on the type plate corresponds to your mains
voltage (type plate is located on the back of the unit).
• Do not immerse the equipment in water or any other
liquids.
• This product is not a toy. Never leave the equipment
within reach of children. Close supervision is required
when using this equipment near children.
•
Repairs to electrical appliances should only be
performed by qualified personnel.
•
Improper repairs may place the user and/or
equipment at serious risk.
•
This equipment is intended for household use only
and should not be used for industrial or commercial
purposes.
•
Do not operate this appliance with a damaged plug
ENGLISH | 11
SAFETY PRECAUTIONS SPECIFICATIONS
or cord, after a malfunction or after being dropped
or damaged in any way.
•
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Do not use this equipment for anything other than its
intended use.
• Do not push objects into any openings as damage
to the equipment and/or electric shock may occur.
•
Do not play music at excessive levels, especially near
children.
•
Remote control battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
•
Keep the speakers indoor during winter, to avoid
damage.
Product Name BTS1200
Output Power 60 W RMS / Max. 120 W
Impedance 8 Ω
Frequency Response 60 Hz - 20 KHz
Sensitivity 89±3 dB
Dimensions 245 x 184 x 165 mm
Water Resistance IPX5 (water resistant*)
Remote Control Battery CR2032
Bluetooth Version CSR 2.1 + EDR-A2DP, ACRCP
Bluetooth Range Up to 10 m
Ambient Temperature -15 °C to +40 °C
* Can stand water projected by a nozzle up to 12.5 liters/min at
a pressure of 30 kPa and a distance of 3 meters for a duration of
3 minutes.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG,. Inc. and any use of such marks by LUXOR
is under license. Other trademarks and trade names are those of
their respective owners.
12 | ENGLISH
PARTS
1. Bluetooth indicator
2. Power/AUX indicator
3. IR receiver for remote control
4. Power ON/OFF
5. AUX In
6. Speaker output/input
7. AC power input socket
INCLUDED:
• Instruction Manual
• 2 speakers
• 10 m speaker cable
• 2 m power cable
• Remote control
• Wall mount kit
1
2
3
4
5
6 6
7
Master unit Slave unit
ENGLISH | 13
PARTS
1. Power/Standby
2. AUX mode
3. Increase bass
4. Decrease treble
5. Decrease bass
6. Previous track
7. Decrease volume
8. Mute
9. Bluetooth mode
10. Go back to factory default settings
11. Increase treble
12. Play/Pause
13. Next track
14. Increase volume
15. Battery compartment
(battery type: CR2032)
1
9
10
12
11
8
13
14
15
2
3
5
4
6
7
14 | ENGLISH
INSTALLATION
NOTE: Unit must be connected to a grounded socket.
CONNECTING YOUR SPEAKERS:
For proper performance the speakers must be wired correctly.
•
To insure proper phasing, connect the speaker cable between
the red terminal on the master speaker to the red terminal on
the slave speaker. Then follow the same procedure for the
black terminals. The cable is marked for easy match.
PLACEMENT:
Because of the great off-axis response and excellent dispersion
of these speakers, they are less critical to position than most
loudspeakers.
• If you install your speakers outdoor, select location facing your
listening area and that is protected from rain, snow, and out of
direct sunlight.
• Start by placing the speakers directly in front of your primary
listening position. Avoid hard vertical edges within one meter
of either side of the cabinet.
•
The performance of these speakers is optimized for listeners
being positioned on a distance of 3-4 meters in front of the
speaker.
NOTE: Keep the speakers indoor during winter, to avoid damage.
WALL MOUNT:
•
Install the wall mounts on desired locations. Pay attention to
top and bottom of wall mount. Center dimension for the screw
holes is 158 mm.
•
Connect the speaker cable between the speakers, and the
power cable to the master speaker.
• Attach the speakers to the wall mounts with the screws (adjust
angle before tightening).
NOTE: If you install your speakers outdoor, you should mount them
in vertical position. This is to avoid water getting inside via the cable
openings, as it may cause damage to the speakers.
Top
Bottom
ENGLISH | 15
INSTALLATION OPERATION
Note: If the speakers are not used for 30 minutes, they will
automatically go into standby mode (indicator will light in red).
BLUETOOTH PAIRING:
1. Activate the Bluetooth function on your mobile device.
2. Press Standby/Power button to start the speakers.
3.
The Bluetooth indicator will start flashing in blue color which
indicates it is in pairing mode.
4.
Find the device “BTS1200“ in your mobile device and connect.
5.
When pairing is completed, the indicator will light in blue. Use
the controls on the connected device or the remote control to
begin playing audio.
•
The speaker will automatically connect to the previously
connected device next time you start it.
•
If you want to go back to Bluetooth mode after entering another
mode, just press the Bluetooth ( ) button on the remote control.
AUX IN:
• Connect a 3.5 mm line in cable (not included) to the AUX in
terminal. Connect the other end to the audio source.
• Press Power/Standby button to start the unit. Press AUX button
and the AUX indicator will light in green.
•
Use the controls on the connected device to begin playing
audio.
158 mm
Ø 10.6 mm
Ø 10.6 mm
4.8 mm
4.8 mm
4.8 mm
4.8 mm
4.8 mm
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- svenska: Luxor BTS1200 Användarmanual
Related papers
Other documents
-
Boston Acoustics SoundWare XS Digital Cinema Owner's manual
-
Samsung VL350 User manual
-
Fidelio E6/12 User manual
-
Samsung MX-HS8000 User manual
-
Exibel 38-8863-2 User manual
-
-
-
-
Yamaha NX-B55 User manual
-
