Introduction

This guide contains all the information you need to quickly setup the Video Encoder. For detailed information on installations or operations, please refer to

the Hardware Manual and Firmware Manual on ACTi website (www.acti.com).

Device Overview

V31

Step 1: Unpack the Device

Check if the package comes with the following items:

Video Encoder Power Cord

Terminal Blocks

• Digital & Audio Input/Output

3

4

5

6

10

11

12

13

14

13

14

15

16

2

7 8

1

9

10

3

11 12 15 16

13 14

Socket Converter

PC

Analog Camera 1 Analog Camera 2 Analog Camera 3 Analog Camera 4 Analog Camera 5 Analog Camera 6 Analog Camera 7 Analog Camera 8

Power Source

Maximum supported cameras:

• V31 up to 8

analog cameras

• V32 up to 16

analog cameras

Back

Front

necessary.

appears.

c. Click the IP address

1. Connect the device and the PC within the same network segment. Once

When using non-IE browsers, free 3

party software plug-ins may be required.

Refer to the device Firmware Manual for more information.

b. Double-click on the device name.

On Network without DHCP Server (Default IP)

1. Ifnecessary,conguretheIPsettingsofyourPCtomatchwiththe

network segment of the Encoder.

and so on

When using non-IE browsers, free 3

Refer to the device Firmware Manual for more information.