Bauknecht EGZH 5400 IN Program Chart

Bauknecht
Brand
Bauknecht
Model
EGZH 5400 IN
Category
Ovens
Type
Program Chart
EGZH 5400
PRODUCT DESCRIPTION SHEET
DE FR NL BE
5019 410 54921
OVEN
Accessories:
•Grid
• Baking tray
• Drip tray
CONTROL PANEL
1.
Programmer
2.
Thermostat control knob
3.
Functions selector knob
4.
Thermostat red indicator light
5.
Spark ignition button
First
Last
First...Last
: Runner positions
1.
Control panel
2.
Cooling fan (not visible)
3.
Upper heating element
4.
Grill element (can be lowered)
5.
Oven light
6.
Fan
7.
Lower heating element (not visible)
8.
Oven door hinges
9.
Oven cool door
0
Off
Oven light
STATIC FUNCTION
Use when all the food is on the same runner level.
-
Pre-heat the oven to the required cooking
temperature and place the food inside as soon as
the red thermostat indicator light switches off.
-
Ideally, the shelf should be on the second runner
level when using the static function.
STATIC FUNCTION + FAN
Use this function when cooking on two different levels.
-
Oven pre-heating is not necessary (except for pizzas
and focaccia).
-
Switch the position of the dishes in the oven 10
minutes before the end of cooking time.
-
Remove the cooked dish and, if necessary, continue
cooking the other one for as long as required.
GRILL FUNCTION
Use the grill function to cook small pieces of meat
(steaks, sausages) and for making toasts.
-
The oven door must be closed during the cooking
cycle.
-
Pre-heat the grill for about 5 minutes.
-
Arrange the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover the
bottom to reduce smoke and fat spatters.
-
Turn over the meat about half-way through
cooking time.
GRILL + FAN
Ideal for large joints, pork, chicken and roast beef.
-
The oven door must be closed during the cooking
cycle.
-
Place the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover the
bottom to reduce smoke and fat spatters.
-
Turn over the meat about half-way through
cooking time.
DEFROST FUNCTION
Ideal for thawing frozen food to room temperature.
-
The food should be inserted in the oven in its
wrapping to prevent it from drying out.
Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the required
temperature.
The red thermostat indicator light switches on.
• When the required temperature is reached, the red
thermostat indicator light switches off.
End of the cooking cycle:
• Return the knobs to the OFF position (
0-•
).
OVEN FUNCTIONS
SWITCHING THE OVEN ON
Important: the programmer symbols are given as an
indication only; for correct operation of the
programmer, follow the instructions and illustrations
given on these pages.
CONTROL BUTTONS AND SYMBOLS
1. Button used to select minute minder with acoustic
signal
2. Button used to set the cooking duration
3. Button used to set the end-of-cooking time
4. Button used to select manual operation
5. Button used to set or change data
6. Button used to set or change data
AUTO:
when permanently alight, indicates operation
of the oven in automatic mode.
AUTO:
will also blink to confirm end-of-cooking,
prompt further programming or indicate a wrong
selection.
indicates that the oven is in operation and
enabled in manual mode.
indicates operation of the minute minder.
SETTING THE CLOCK, AND SELECTING MANUAL
OPERATION
When the appliance is installed new, or following a
power failure, digits
0:00
and the
AUTO
symbol will
blink in the display. All other functions remain
inhibited.
Press and hold buttons
2
and
3
simultaneously, and set
the clock using buttons
5
and
6.
To operate the oven manually, press button
4
: the
symbol will be displayed.
USING THE MINUTE MINDER WITH ACOUSTIC
SIGNAL
This function is independent of oven operation
• Press button
1
: digits
0:00
are displayed
• Press button
5
or
6
to display the desired cooking time.
Having released the buttons, or a few seconds
afterwards, the actual time and the symbol are
displayed.
The acoustic signal warns that the set time has elapsed.
Press button
1
to silence the acoustic signal.
PROGRAMMING THE COOKING TIME
Press button
2
: digits
0:00
are displayed; set the
desired cooking time with buttons
5
and
6
. After a few
seconds, the actual time is displayed with
AUTO
and
the symbol both permanently alight.
• Set the oven control knob to the temperature
required: the oven will come into operation
immediately.
• Once the cooking time has elapsed, an acoustic
signal indicates that the oven has switched off.
Return the oven control knob to position
“0”
, then
press button
4
to silence the acoustic signal.
Note: the time remaining until end-of-cooking can be
checked or altered at any moment by pressing button
2
.
The end-of-cooking time can also be displayed by
pressing button
3.
USING THE PROGRAMMER
PROGRAMMING DURATION AND END OF
COOKING TIME
• Press button
2
: digits
0:00
are displayed; set the
desired cooking time with buttons
5
and
6
. After a
few seconds, the actual time is displayed with
AUTO
and the symbol both permanently
alight.
• Press button
3
to set the end of cooking time,
which is selected using buttons
5
and
6
. The
symbol will now go out, and reappear again when
the oven comes into operation automatically at the
start of the programmed duration.
• Set the oven control knobs to the temperature and
functions required.
• Once the cooking time has elapsed, an acoustic
signal indicates that the oven has switched off.
Return the oven control knob to position
“0”
, then
press button
4
to silence the acoustic signal.
  • Page 1 1
  • Page 2 2

Bauknecht EGZH 5400 IN Program Chart

Bauknecht
Brand
Bauknecht
Model
EGZH 5400 IN
Category
Ovens
Type
Program Chart
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents