PACK 10
STAGE P.
78 THE LEFT DOOR – 3 194
79 THE LEFT DOOR – 4 196
80 THE RIGHT DOOR – 1 198
81 THE RIGHT DOOR – 2 200
82 THE RIGHT DOOR – 3 202
83 THE RIGHT DOOR – 4 204
84 THE BOOT LID 206
85 THE FRONT LIGHTS – 1 208
86 THE FRONT LIGHTS – 2 212
Designed and produced by Milanoedit srl – www.milanoedit.com
Published by De Agostini Publishing S.p.A., 28100 Novara,
Via G. da Verrazzano 15
All rights reserved © 2020
NOT SUITABLE FOR CHILDREN UNDER THE AGE OF 14.
THIS PRODUCT IS NOT A TOY AND MUST BE USED UNDER
THE SUPERVISION OF AN ADULT.
ITEMS MAY VARY FROM THOSE SHOWN.
THE LEFT DOOR – 3
78
In this stage you will start working on the left door window. As always,
be careful when handling the pieces.
❶
❷
❸
❹
Window frame
Window
Deflector
Screws (2.3 x 4mm) x4
Attach the window frame to the left door you worked on in the
previous stages. Position the pieces as shown in the photo.
Gently press the pieces together.
Secure the pieces with three of the screws
you received with this stage.
Step
1
COSMO SPORT
The window – 1
DOOR
❷
❶
❸
❹
❶
LIST OF PIECES
RECOMMENDED TOOLS
• Adhesive tape
TOOLS NEEDED
• Cross screwdriver no. 1
Stage 78Pack 10
194
Step
2
COSMO SPORT
The window – 2
Step
3
COSMO SPORT
The window – 3
Insert the linchpins on the window into the grooves indicated in the photo. This will make it
possible to lift and lower the window using the crank.
Now attach the window to the
frame, positioning the pieces
as shown in the photo.
You will now attach the deflector to the window
frame, positioning the pieces as shown
in the photo.
Attach the piece using the interlocking elements indicated in the photo.
While you are working on the door, keep
the deflector closed to avoid damaging it.
To be extra careful, temporarily secure it
to the frame with some adhesive tape.
This is the result of this
assembly session. As always,
keep the pieces
in a safe place.
FINAL RE SULTFINAL RE SULT
The next stage
❶❶
❸
❸
❷
❷
Stage 78Pack 10
195
THE LEFT DOOR – 4
79
In this stage you will finish assembling the left door of your model.
❶
❷
❸
❹
Inner panel
Detail
Armrest
Door handle
Position the window and window regulator
as shown in the photo.
Position the window crank on the inner panel
as shown in the photo.
Hold the window crank in place
and attach the inner panel to
the left door, positioning the
pieces as shown in the photo.
Step
1
COSMO SPORT
The panel – 1
Press the pieces together until they click
into place.
TOOLS NEEDED
• Cross screwdriver no. 2
Before attaching the inner panel to the door,
we suggest you slightly enlarge the holes
indicated in the photo with the tip
of a cross screwdriver.
❶
DOOR
❷
❶
❸ ❹
❶
LIST OF PIECES
A SUGGESTION
Stage 79Pack 10
196
Step
2
COSMO SPORT
The panel – 2 Step
3
COSMO SPORT
The panel – 3
Step
4
COSMO SPORT
The panel – 4
Attach the door handle to the panel, positioning
the pieces as shown in the photo.
Now attach the detail to the panel.
Gently press the pieces together.
Attach the armrest to the panel,
positioning the pieces as shown
in the photo.
Check that the
window crank turns
smoothly. If the
window doesn’t
roll up and down
easily, hold it with
your fingers and
move it up and
down, turning the
crank at the same
time to adjust the
gearwheels.
Press the pieces together until they click
into place.
The left door is now finished.
Keep it in a safe place with
the rest of the pieces.
FINAL RE SULTFINAL RE SULT
The next stage
❸
❷
❹
Stage 79Pack 10
197
THE RIGHT DOOR – 1
80
In this stage you will start assembling the right door of your model.
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
Inner panel
Hinge
Gearwheel 1
Door detail
Gearwheel 2
Bracket
Spring
Screws A (2.3 x 4mm) x2
Screws B (2.3 x 4mm) x2
Screws C (2.3 x 4mm) x3
❽
❾
Insert the detail into the hole in the inner
panel, as shown in the photo.
Make sure the detail inserts easily.
If you have any difficulty attaching the pieces, file them as shown in the photo.
Remove the detail for now.
Step
1
COSMO SPORT
The door – 1
TOOLS NEEDED
• Cross screwdriver no. 1
• Modelling glue
DOOR
• Flat file
• Round file
❷
❶
❸
❺ ❻
❽
❿
❾
❹
❼
❶
❹
❹
❶
LIST OF PIECES
Stage 80Pack 10
198
Step
2
COSMO SPORT
The door – 2
Step
4
COSMO SPORT
The door – 4
Step
3
COSMO SPORT
The door – 3
Now insert the detail into the spring.
Attach gearwheel 2 to the inner panel. Also attach gearwheel 1,
positioning the pieces
as shown in the photo.
Secure gearwheel 1
to the inner panel
with a type A screw.
Attach the detail to the panel, positioning
the pieces as shown in the photo.
Join the pieces
together as shown
in the photo.
Now attach the
bracket to the
inner panel.
Secure the pieces
with a drop of glue.
This is the result of this
assembly stage. As always,
keep the pieces
in a safe place.
FINAL RE SULTFINAL RE SULT
The next stage
❽
❹
❼
❻
❺❸
❹
❶
❼
Stage 80Pack 10
199
THE RIGHT DOOR – 2
81
In this stage you will continue to work on the right door of your model.
❶
❷
Door
Screws (2.3 x 4mm) x7
Get the hinge you received with stage 80 and attach it to the door,
positioning the pieces as shown in the photo.
Insert and tighten two of the type C screws
you received with stage 80 in the circled holes.
Step
1
COSMO SPORT
The door – 1
Insert and tighten one of the type B screws
you received with stage 80 in the circled hole.
TOOLS NEEDED
• Cross screwdriver no. 1
❷
❶
❶
❷ Stage 80
DOOR
LIST OF PIECES
Stage 81Pack 10
200
Step
2
COSMO SPORT
The door – 2
Step
3
COSMO SPORT
The door – 3
Secure the pieces with six of the screws
you received with this stage.
Attach the inner panel you worked on in stage 80 to the door.
Position the pieces as shown in the photo.
Make sure the screw holes are aligned.
This is the result of this
assembly stage. As always,
keep the pieces
in a safe place.
FINAL RE SULTFINAL RE SULT
The next stage
❶
Stage 81Pack 10
201
THE RIGHT DOOR – 3
82
In this stage you will start working on the right door window.
As always, be careful when handling the pieces.
❶
❷
❸
❹
Window frame
Window
Deflector
Screws (2.3 x 4mm) x4
Attach the window frame to the right door you worked
on in the previous stages. Position the pieces as shown
in the photo. Gently press the pieces together.
Secure the pieces with three of the screws
you received with this stage.
Step
1
COSMO SPORT
The window – 1
DOOR
❷
❶
❸
❹
❶
RECOMMENDED TOOLS
• Adhesive tape
TOOLS NEEDED
• Cross screwdriver no. 1
LIST OF PIECES
Stage 82Pack 10
202
Step
2
COSMO SPORT
The window – 2
Step
3
COSMO SPORT
The window – 3
Insert the linchpins on the window into the grooves indicated in the photo.
Now attach the window to the
frame, positioning the pieces
as shown in the photo.
Attach the deflector to the window frame,
positioning the pieces as shown in the photo.
The pieces join together thanks to the interlocking elements indicated in the photo.
While you are working on the door, keep
the deflector closed to avoid damaging it.
To be extra careful, temporarily secure it
to the frame with some adhesive tape.
This is the result of this
assembly session. As always,
keep the pieces
in a safe place.
FINAL RE SULTFINAL RE SULT
The next stage
❶
❶
❸
❸
❷
❷
Stage 82Pack 10
203
THE RIGHT DOOR – 4
83
In this stage you will finish assembling the right door of your model.
❶
❷
❸
❹
Inner panel
Detail
Armrest
Handle
Position the window and window regulator
as shown in the photo.
Position the window crank on the inner panel
as shown in the photo.
Hold the window crank in place
and attach the inner panel to
the right door, positioning the
pieces as shown in the photo.
Step
1
COSMO SPORT
The panel – 1
Press the pieces together until they click
into place.
TOOLS NEEDED
• Cross screwdriver no. 2
Before attaching the inner panel to the door,
we suggest you slightly enlarge the holes
indicated in the photo with the tip
of a cross screwdriver.
❶
DOOR
❷
❶
❸❹
❶
LIST OF PIECES
A SUGGESTION
Stage 83Pack 10
204
Step
2
COSMO SPORT
The panel – 2 Step
3
COSMO SPORT
The panel – 3
Step
4
COSMO SPORT
The panel – 4
Attach the door handle to the panel, positioning
the pieces as shown in the photo.
Now attach the detail to the panel.
Gently press the pieces together.
Attach the armrest to the panel,
positioning the pieces as shown
in the photo.
Check that the
window crank turns
smoothly. If the
window doesn’t
roll up and down
easily, hold it with
your fingers and
move it up and
down, turning the
crank at the same
time to adjust the
gearwheels.
Press the pieces together until they click
into place.
The right door of your model
is now also finished.
As always, keep it in a safe
place with the rest
of the pieces.
FINAL RE SULTFINAL RE SULT
The next stage
❸
❷
❹
Stage 83Pack 10
205
THE BOOT LID
84
In this stage, you will start working on your model’s boot lid.
As always, handle the pieces carefully.
❶
❷
❸
❹
❺
Boot lid
Hinge 1
Hinge 2
Mount brackets
Screws (2.3 x 4mm) x7
Attach hinge 2 to the boot lid, positioning the pieces
as shown in the photo.
Make sure the screw holes are aligned.
Secure the pieces with two of the screws you received
with this stage.
Step
1
COSMO SPORT
The boot lid – 1
TOOLS NEEDED
• Cross screwdriver no. 1
BOOT LID
❷
❶
❸
❺
❹
❶❸
LIST OF PIECES
Stage 84Pack 10
206
Now attach hinge 1 to the boot lid.
Make sure the screw holes are aligned.
Secure the pieces with two more of the screws you received
with this stage.
Step
2
COSMO SPORT
The boot lid – 2
This is the result of this
easy assembly session.
As always, keep the
pieces in a safe place.
FINAL RE SULTFINAL RE SULT
The next stage
❷
Stage 84Pack 10
207
THE FRONT LIGHTS – 1
85
In this stage you will start working on the front lights of your model and
then test them. Get the remote control you received with stage 75.
❶
❷
❸
❹
❺
❻
❼
Wiring 1
Wiring 2
Speaker 1
Speaker 2
Speaker housings
Mount bracket
Screws (2.3 x 3mm) x3
❶
❷
Due to the shape of the pieces, there is only one way
to attach the speakers to their housings.
Attach the speakers to their housings, as shown in the photo.
You have now assembled both speakers.
Step
1
COSMO SPORT
The speakers – 1
TOOLS NEEDED
INDICATOR
• Modelling glue
• AAA batteries x2
• LR44 batteries x3
❷
❶
❸ ❺ ❻❹ ❼
❸
❺
❺
❸❹❺
RECOMMENDED TOOLS
• T o o t h p i c k s
LIST OF PIECES
Stage 85Pack 10
208
Get the front end of your model’s body.
Attach the mount bracket to the body, positioning the pieces as shown in the photo.
Apply a drop of glue to where the bumper attaches to the body, as shown in the photo.
Step
2
Step
3
COSMO SPORT
COSMO SPORT
The bumper and the car body
The mount bracket
❻
Stage 85Pack 10
209
Attach the two speakers you assembled in step 1 to the body, positioning the pieces as shown in the photo.
Get the main body of your model and the front grille.
You are going to connect the wires marked A1, A2, C1
and C2. Look at the following photos very carefully
to avoid any mistakes.
Connect plug A1 on the indicator wire to socket A1
on the control unit.
Connect plug C1 on wire 1 to socket C1
on the control unit.
Connect plug C2 on wire 2 to socket C2
on the secondary circuit board.
Connect plug A2 on the indicator wire to socket A2
on the secondary circuit board.
Step
4
Step
5
COSMO SPORT
COSMO SPORT
The speakers – 2
The wiring – 1
❶❷❶
❷
A2
A1
CONTROL UNIT SECONDARY
CIRCUIT BOARD
C1
C1
C2
A2
A2
A1
A1
C2
Stage 85Pack 10
210
Step
7
COSMO SPORT
The wiring – 3
This is the result of this satisfying assembly
session. As always, keep the pieces
in a safe place.
FINAL RE SULTFINAL RE SULT
The next stage
Insert two AAA batteries into your
model’s battery holder and three LR44
batteries into the remote control.
Press the ignition key and the power
button on the remote control.
Apply a drop of glue to the base of both the indicator LED lights, as shown in the photo.
Be careful not to damage the components.
Step
6
COSMO SPORT
The wiring – 2
Check that the front LED lights work by pressing the remote-control buttons circled in the photos. Each button activates a different mode,
depending on how many times you press it.
When you have finished testing the lights,
remove the batteries from the model’s
battery holder and from the remote control,
and disconnect wires 1 and 2 from their
respective sockets.
Stage 85Pack 10
211
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Deagostini Mazda Cosmo User guide
-
-
-
-
-
-
-
-
-
Other documents
-
BDI Cosmo 5729 User manual
-
-
Heat & Glo LifeStyle COSMO-I30 User manual
-
Cosmo C106SIXPT User manual
-
-
Polaroid DIGITAL 320 Quick start guide
-
-
-
-
HK Audio C 8 User manual