2. Navitar
  3. 1-62315

Navitar 1-62315 Dimensional Drawing

  • Hello! I have reviewed the specification document for the NAVITAR zoom lens, specifically the MOTORIZED (5PH VEXTA) 6X ZOOM & 3mm FF w/COAX, DUAL 2 POSITION LS (HE) model. This document details the mechanical dimensions, tolerances and other important characteristics of the lens. I am ready to answer any questions you have about the device and its specifications.
  • What is the max surface roughness?
    What is the concentricity tolerance?
    What is the document's proprietary information restriction?
REV CHANGE RECORD AND DATECH
ROCHESTER, NEW YORK
REV
SIZE
B
P/N SUFFIX DEFINITION
-1 CONVERSION COATING
-2 PAINTING
-3 MARKING
-R REWORK
UNLESS OTHERWISE
SPECIFIED
DIMENSIONS ARE IN INCHES
AND INCLUDE CHEMICALLY
APPLIED OR PLATED FINISHES
DEC. .XXX `.005
DEC. .XX `.010
FRACT. `1/64
ANGLES `30'
CONCENTRICITY .003 TIR
BREAK ALL SHARP EDGES
.005 MIN. .010 MAX
MAX. SURF. ROUGHNESS 32
TOLERANCES:
MATERIAL:
FINISH:
CHAMFER ALL THREADS
30~ TO ROOT DIAM.
USED ON:
SCALE:
DR.:
CH.:
APP.:
DATE DR.:
DO NOT SCALE DRAWING
0.0 mm 25.0
0.0 inch 1.0
SHEET OF
THE CONTENTS OF THIS
DOCUMENT ARE PROPRIETARY
TO NAVITAR, ITS USE IS
AUTHORIZED ONLY FOR
RESPONDING TO REQUEST
FOR QUOTATION OR
PERFORMANCE OF WORK FOR
NAVITAR
1-62315 A
1 1
R. PODLENA
P. BONAFEDE
11/11/2002
MOTORIZED (5PH VEXTA) 6X ZOOM
& 3mm FF w/COAX, DUAL 2
POSITION LS (HE)
1:1
ARELEASE 06/16/03
OUTLINE
M25x.75T
1.093 - 32T
n1.24 [31.5]
5.68 [144.3]
.73 [18.4]
.05 [1.3]
.44 [11.1]
n1.44 [36.5]
4.08 [103.5]
n1.312-.001
n1.78 [45.2]
GEAR O.D.
n1.60 [40.6]
SLEEVE O.D.
3.08 [78.3]
3.45 [87.5]
3.07 [78.0]
2.19 [55.7]
2.19 [55.7]
/