Navitar 1-62639 Dimensional Drawing

Type
Dimensional Drawing

This manual is also suitable for

REV
CHANGE RECORD AND DATE CH
ROCHESTER, NEW YORK
REV
SIZE
B
P/N SUFFIX DEFINITION
-1 CONVERSION COATING
-2 PAINTING
-3 MARKING
-R REWORK
UNLESS OTHERWISE
SPECIFIED
DIMENSIONS ARE IN INCHES
AND INCLUDE CHEMICALLY
APPLIED OR PLATED FINISHES
DEC. .XXX `.005
DEC. .XX `.010
FRACT. `1/64
ANGLES `30'
CONCENTRICITY .003 TIR
BREAK ALL SHARP EDGES
.005 MIN. .010 MAX
MAX. SURF. ROUGHNESS 32
TOLERANCES:
MATERIAL:
FINISH:
CHAMFER ALL THREADS
30~ TO ROOT DIAM.
USED ON:
SCALE:
DR.:
CH.:
APP.:
DATE DR.:
DO NOT SCALE DRAWING
0.0 mm 25.0
0.0 inch 1.0
SHEET OF
THE CONTENTS OF THIS
DOCUMENT ARE PROPRIETARY
TO NAVITAR, ITS USE IS
AUTHORIZED ONLY FOR
RESPONDING TO REQUEST
FOR QUOTATION OR
PERFORMANCE OF WORK FOR
NAVITAR
1-51335
A
1
1
R. PODLENA
P. BONAFEDE
9/18/2003
MOTORIZED (ENC) 12X w/ 2 POS LS
(HE)
1:1
A
RELEASE
09/04/03
OUTLINE
DC ENCODED PINOUT
PIN 1 = MOTOR CH A
PIN 2 = FAR LIMIT
PIN 3 = N/C
PIN 4 = +5Vdc
PIN 5 = MOTOR +
PIN 6 = MOTOR CH B
PIN 7 = NEAR LIMIT
PIN 8 = COMMON
PIN 9 = MOTOR - 9 PIN MALE D-SUB
2.09 [53.1]
2.41 [61.3]
1.46 [37.0]
1.312n
-
.001
.000+
n1.91 [48.4]
.14 [3.6]
5.29 [134.4]
1.88 [47.6]n
n1.66 [42.2]
n1.40 [35.6]
n1.31 [33.3]
n1.25 [31.8]
4-40 UNC - 2B(4) x
4.18 [106.0] .80 [20.3]
.32 [8.1]
.75 [19.1]
.38 [9.5]
  • Page 1 1

Navitar 1-62639 Dimensional Drawing

Type
Dimensional Drawing
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI