2. ROOMS TO GO
  3. 74042309

ROOMS TO GO 74042309 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the ROOMS TO GO SCIT 4230-23812 Leg Table. This document outlines the necessary hardware and the steps to attach the table legs to the table top, including the use of an Allen key. I'm ready to answer any questions you have about assembling your new table.
  • What is the recommended number of people for assembly?
    What type of tool is needed for assembly?
    What hardware is included with the table?
Assembly Instructions
SCIT 4230-23812 Leg Table SKU# 74042309
Hardware Pack Location(s):
4230-23812 Leg Table, SKU# 74042309
Step Code Hardware Q’TY
1 8pcs
1
A F-Bolt 8x45mm, P-HEX, ST
B Plain washer 8.5x18x1mm, ST 8pcs
1 C Spring washer 8.5x12.5x1.5, ST 8pcs
1pc
1 D Support pat 25x45x(t3.0), ST 4pcs
2 E Allen key 4x98mm
Assembly Instructions
SCIT 4230-23812 Leg Table SKU# 74042309
Hardware Pack Location(s):
4230-23812 Leg Table, SKU# 74042309
***Caution: Please read all instructions carefully before starting the assembly process. These parts are cumbersome
and heavy. Therefore, two people are recommended in order to prevent personal injury and insure the parts are not
damaged during the assembly.
STEP 1: STEP 2:
Attach the table legs to assembled the table top with
F-bolt A, Spring washer C, Plain washer B and
support pat D. Hand tighten only.
NOTE: Do not tighten all the bolts
To make sure it is level, a person adjusts the chairs
legs and the table top deflected, other use allen key E
to tighten all bolts.
A
BD
C
E
/