2. Ridetech
  3. Rear Baer Brake Systems for 1964-1966 Mustang

Ridetech Rear Baer Brake Systems for 1964-1966 Mustang, Front Baer Brake Systems for Tall Spindles, Front Baer Brake Systems for TruTurn Equipped 1964-1966 Mustang Template

  • Hello! I've reviewed the provided instructions for the EXTREME PLUS BAER MB, 14.0 brake system. This document includes a template for assessing wheel fit, explains how to measure your wheel’s hub, and describes how to account for clearance issues and the use of spacers. I'm here to help answer any questions you have about the document and the brake system.
  • What should I do if the template isn't to scale after printing?
    How much clearance is required between the caliper and the wheel?
    What if there is not enough facial clearance?
N085P.VLM
EXTREME PLUS BAER MB, 14.0
rotor
caliper
hub
N085P.VLM
Use a ruler to see if the fax
has ENLARGED or
reduced the scale.
INCH
/