Fujitsu Siemens Computers FPCCC24 User manual

Brand: Fujitsu Siemens Computers

Model: FPCCC24

Type: User manual

These instructions provide details on using the

FPCCC24 Bump Case. This case is designed for

use with your Tablet PC. The bump case provides

added protection when transporting, using, or

storing the Tablet PC.

We strongly recommend that you read these

instructions prior to using the bump case with

your computer.

INSTRUCTIONS

Bump Case User’s Guide

FPCCC24

Fujitsu Computer Systems

FPC58-0721-03.fm Page 1 Thursday, January 22, 2004 2:01 PM

Figure 1. Bump case - Front

DC-In access

LAN/Modem Access

Air vents

Navigation

button access

IR keyboard

port access

Speaker

access

Application

button access

USB port

access

Infrared

port access

PC Card

access

Power On/

Suspend/

Resume/

Microphone

access

Pen holder

FPC58-0721-03.fm Page 2 Thursday, January 22, 2004 2:01 PM

Installing the Tablet PC

Figure 2. Bump case - Rear

To install your Tablet PC into the bump case, position the

case face down as shown in Figure 2. Open the right side flap

of the case (as seen from the back). The flap is secured by a

long strip of Velcro® that is attached to the back of the bump

Prior to installing the Tablet PC into the bump

case, remove the pen. Once the system is

installed, you won’t be able to remove the pen.

Store the pen in the pen holder. (See Fig. 1)

Side Flap

Pen holder

Side Flap

Velcro

Strips

Hand

straps

D-Rings

(4 places)

Battery

Release

Latch access

FPC58-0721-03.fm Page 3 Thursday, January 22, 2004 2:01 PM

case. Note that the flap on the left side also opens for port

access, but restraining straps prevent the system from being

inserted or removed from that side.

Slide the system into the bump case, with the screen facing

the open window. (See Figure 3). Reattach the flap to the

side of the case.

Figure 3. Inserting Tablet PC into Bump Case

The ends of the elasticized handstraps have D-rings to which

you can attach the shoulder strap. To secure the shoulder

strap, attach the strap clips to two of the D-rings. The bump

case can be carried vertically, horizontally, or diagonally,

depending on how you orient the clips.

You can also use one of the D-rings to attach a pen tether.

Bump case

(rear, with side flap open)

Tablet PC

FPC58-0721-03.fm Page 4 Thursday, January 22, 2004 2:01 PM

Caring for the bump case

The bump case is made of rugged materials, and is designed

to withstand daily use. Treat the case as you would a brief-

case or purse.

Occasionally, the bump case may become soiled. To clean it,

use a clean cloth and warm soapy water to wash the soiled

area.

FPC58-0721-03.fm Page 5 Thursday, January 22, 2004 2:01 PM

FPC58-0721-03.fm Page 6 Thursday, January 22, 2004 2:01 PM

FPC58-0721-03.fm Page 7 Thursday, January 22, 2004 2:01 PM

Fujitsu Computer Systems Corporation

1250 E. Arques Avenue (M/S 122),

Sunnyvale, California 94085

For more information, call

1-877-372-3473 or visit our Web site at:

us.fujitsu.com/computers

For technical support call: 1-800-8Fujitsu (1-800-838-5487)

or e-mail us at: [email protected]om

Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu, Ltd.

Microsoft and Windows are registered trademarks of the Microsoft Corpora-

tion. All other trademarks mentioned herein are the property of their respec-

tive owners. We cannot guarantee the accuracy of the contents of this

document. We disclaim liability for errors, omissions or future changes.

FPC58-0721-03

FPC58-0721-03.fm Page 8 Thursday, January 22, 2004 2:01 PM

Fujitsu Siemens Computers FPCCC24 User manual

Fujitsu Siemens Computers FPCCC24 User manual

Fujitsu Siemens Computers FPCCC24 User manual

Related papers

Other documents