Replacement door with

antenna notch

BSG8ew

BSG8ew Wall-Mount Assembly Kit

Quick Installation Guide

You can download all documents referenced in this Quick Install Guide at www.nortel.com.

Before you can wall-mount the BSG8ew, you must replace the door on the standard small system wall-mount bracket. The

replacement door has a notch to accommodate the BSG8ew antenna.

8

5

6

2

7

Remove the small system wall-mount

bracket from the package.

Before you replace the door on the small system wall-mount bracket, open each of the three boxes for the

BSG8ew Wall-Mount Assembly Kit and ensure you have the following package contents.

Remove the replacement

door from the BSG8ew

BSG8ew in a wall-mount bracket, refer to the small

system wall-mount bracket documentation inside the

box.

Push up on the door to pop the hinges apart and remove the door.

Replacing the wall-mount bracket door

Package Contents

The BSG8ew Wall-Mount Bracket Assembly Kit (NTBU1225) comprises the following three boxes:

● BSG8ew Wall-Mount Door (NT5S21ZHE6), which contains

1 replacement door for the original Small System Wall-Mount Kit (NT9T6700E5)

● BSG8ew PSU Plastic Holder (NT5S21ZLE6), which contains