Aaeon OMNI-3155-BT, OMNI-2155-BT, OMNI-2215-BT, OMNI-3105-BT, OMNI-3125-BT, OMNI-3175-BT, OMNI-3195-BT User manual

  • Hello! I am an AI chatbot trained to assist you with the Aaeon OMNI-3155-BT User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Last Updated: May 3, 2019
OMNI-BT Series
Industrial Modular Touch Panel PC
With Intel® Bay Trail Platform
Users Manual 3
rd
Ed
Preface II
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
Copyright Notice
This document is copyrighted, 2019. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.
Preface III
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows is a registered trademark of Microsoft Corp.
Intel, Pentium, Celeron, and Xeon
are registered trademarks of Intel Corporation
Core, Atom are trademarks of Intel Corporation
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.
Preface IV
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
OMNI-BT Series Panel PC (panel size from 10.4 21.5)
1
Product DVD
1
Phoenix Power connector
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
Preface V
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver
installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the product page at AAEON.com for the latest version of this
document.
Preface VI
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. All cables and adapters supplied by AAEON are certified and in accordance with
the material safety laws and regulations of the country of sale. Do not use any
cables or adapters not supplied by AAEON to prevent system malfunction or
fires.
3. Make sure the power source matches the power rating of the device.
4. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
5. Always completely disconnect the power before working on the systems
hardware.
6. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
7. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
8. Always disconnect this device from any AC supply before cleaning.
9. While cleaning, use a damp cloth instead of liquid or spray detergents.
10. Make sure the device is installed near a power outlet and is easily accessible.
11. Keep this device away from humidity.
12. Place the device on a solid surface during installation to prevent falls
13. Do not cover the openings on the device to ensure optimal heat dissipation.
14. Watch out for high temperatures when the system is running.
15. Do not touch the heat sink or heat spreader when the system is running
16. Never pour any liquid into the openings. This could cause fire or electric shock.
Preface VII
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
17. As most electronic components are sensitive to static electrical charge, be sure
to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and contain all electronic components
in any static-shielded containers.
18. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
19. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICES PERMITTED STORAGE TEMPERATURES
(SEE CHAPTER 1) TO PREVENT DAMAGE.
Preface VIII
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept
any interference received including interference that may
cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturers instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et
les directives gouvernementales de recyclage.
Preface IX
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含量
AAEON Panel PC/ Workstation
部件名称
有毒有害物质或元
(Hg)
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
外部信号
连接器及线材
外壳
中央处理器
与内存
硬盘
液晶模块
光驱
触控模块
电源
O:表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注:
一、此产品所标示之环保使用期限,系指在一般正常使用状况下。
二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品
Preface X
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Panel PC/ Workstation
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
O
O
O
O
O
Wires &
Connectors
for External
Connections
O
O
O
O
O
O
Chassis
O
O
O
O
O
O
CPU & RAM
O
O
O
O
O
O
Hard Disk
O
O
O
O
O
O
LCD
O
O
O
O
O
O
Optical Drive
O
O
O
O
O
O
Touchscreen
O
O
O
O
O
O
PSU
O
O
O
O
O
O
OThe quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only
Preface XI
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
Table of Contents
Chapter 1 - Product Specifications ........................................................................................ 1
1.1 Specifications 2
1.1.1 OMNI-3105-BT ............................................................................................ 4
1.1.2 OMNI-3125-BT ............................................................................................ 6
1.1.3 OMNI-3155-BT ............................................................................................ 8
1.1.4 OMNI-2155-BT ........................................................................................... 10
1.1.5 OMNI-3175-BT ........................................................................................... 12
1.1.6 OMNI-3195-BT ........................................................................................... 14
1.1.7 OMNI-2215-BT ........................................................................................... 16
1.2 OMNI Modules 18
1.2.1 USB/ COM/ LAN Module ........................................................................ 18
1.2.2 Dual LAN Module...................................................................................... 18
1.2.3 MiniCard and SIM Card Module ............................................................ 19
1.2.4 RS-232/422/485 Module ......................................................................... 19
1.2.5 Isolated RS-232/422/485 Module......................................................... 20
1.2.6 Digital I/O Module ................................................................................... 20
1.2.8 Audio Module ............................................................................................ 21
1.2.9 HMS Module .............................................................................................. 21
1.2.10 COM x 4 + DIO x 16 Module .................................................................. 21
1.2.11 Wi-Fi 802.11 b/g/n Module ..................................................................... 22
1.2.12 RS-485/422/232 x 2 Module ................................................................. 22
Chapter 2 Hardware Information ..................................................................................... 23
2.1 Dimensions 24
2.1.1 Dimensions: Main Panels ........................................................................ 24
2.1.2 Dimensions: OMNI Modules .................................................................. 32
2.1.3 Dimensions: Cables .................................................................................. 35
Preface XII
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
2.2 List of Jumpers 36
2.2.1 Clear CMOS (JP1) ...................................................................................... 37
2.2.2 AT/ATX Mode Selection (JP3) ................................................................. 37
2.2.3 LVDS Port Backlight Lightness Control Mode Selection (JP4) ......... 37
2.2.4 LVDS Inverter Voltage Selection (JP5) .................................................. 37
2.2.5 Touch Selection (JP8) ............................................................................... 38
2.2.6 COM2 +12V/+5V/Ring Selection (JP9) ................................................ 38
2.3 List of Connectors 39
2.3.1 MiniCard Connector with On-board SIM (CN3) ................................ 40
2.3.2 LPC Debug Port (CN4) ............................................................................. 41
2.3.3 Battery Connector (CN6) ........................................................................ 42
2.3.4 Cfast Connector (CN10) .......................................................................... 42
2.3.5 Board to Board Connector (CN11) ........................................................ 43
2.3.6 Panel Size Select (CN15) 17 inch LCD ................................................... 45
2.3.7 LVDS Backlight Connector (CN17)......................................................... 45
2.3.8 Mini PCIe Slot (CN18) ............................................................................... 45
2.3.9 SATA Power Connector (CN19) .............................................................. 47
2.3.10 SATA Connector (CN20) .......................................................................... 48
2.3.11 LVDS Connector (CN21) .......................................................................... 48
2.3.12 HDMI Connector (CN22) ........................................................................ 49
2.3.13 Touchscreen Connector (CN29) ............................................................ 50
2.3.14 LAN1 Connector (CN37) .......................................................................... 51
2.3.15 LAN2 Connector (CN38).......................................................................... 51
2.3.16 DC-in (CN39) ............................................................................................. 52
2.3.17 COM2 Connector (CN40) ....................................................................... 52
2.3.18 Remote Switch Connector (CN43) ........................................................ 53
2.3.19 Combo connector (CN45) ...................................................................... 53
2.4 Assembling Modules 55
Preface XIII
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
2.5 Installing the Hard Disk Drive 57
2.6 Installing DRAM 59
2.7 Mount the OMNI onto the wall 60
2.8 Assemble the OMNI panel and the CPU Box 62
2.9 P-CAP Touch Screen Operating 65
Chapter 3 - AMI BIOS Setup ................................................................................................ 66
3.1 System Test and Initialization 67
3.2 AMI BIOS Setup 68
3.3 Setup Submenu: Main 69
3.4 Setup Submenu: Advanced 70
3.4.1 Advanced: CPU Configuration................................................................ 71
3.4.2 Advanced: IDE Configuration ................................................................ 72
3.4.3 Advanced: USB Configuration ............................................................... 73
3.4.4 Advanced: Hardware Monitor ............................................................... 74
3.4.5 Advanced: Power Management ............................................................ 75
3.4.6 Advanced: Super IO Management ....................................................... 76
3.4.6.1 Super IO Management: Serial Port 2 Configuration .................... 77
3.4.6.2 Super IO Management: Serial Port 5 Configuration .................... 78
3.4.6.3 Super IO Management: Serial Port 6 Configuration (Optional) . 79
3.4.6.4 Super IO Management: Serial Port 7 Configuration (Optional) . 80
3.4.6.5 Super IO Management: Serial Port 8 Configuration (Optional) .. 81
3.5 Setup submenu: Chipset 82
3.5.1 Chipset: North Bridge .............................................................................. 83
3.5.1.1 North Bridge: Display Control Configuration................................. 84
3.5.2 Chipset: South Bridge .............................................................................. 86
3.6 Setup submenu: Security 87
3.7 Setup submenu: Boot 88
3.8 Boot: BBS Priorities 89
Preface XIV
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
3.9 Setup submenu: Exit 90
Chapter 4 Drivers Installation & Touchscreen Settings .................................................. 91
4.1 Product CD/DVD 92
4.2 PCAP Dual Monitor Touch Settings 100
Appendix A - Watchdog Timer Programming................................................................. 102
A.1 Watchdog Timer Initial Program 103
Appendix B - I/O Information ............................................................................................ 105
B.1 I/O Address Map 106
B.2 Memory Address Map 108
B.3 IRQ Mapping Chart 109
Appendix C OMNI COM Module / UART Setting ......................................................... 112
C.1 9741215513 [PER-T497], RS-232/422/485 x 2, I/O module 113
C.2 9741215513 [PER-T371], OMNI COM x 2, USB x 2, LAN x 1, I/O module 117
C.3 9741215516 RS-232/422/485 x 4 121
C.4 9741215517 Isolation RS-232/422/485 x 4 125
C.5 9741215518 [PER-T432], Isolation RS-232/422/485 x 4, DIO x 16 I/O
Module 129
C.6 UART mode setting 134
Industrial Modular Touch Panel
PC
OMNI
-
BT
Series
Chapter 1
Chapter 1 - Product Specifications
Chapter 1 Product Specifications 2
Industrial Modular Touch Panel
PC
OMNI
-
BT Series
1.1 Specifications
Specifications for System and Power Supply are same for all models/SKUs of OMNI-BT
series. All other specifications are listed by SKU in the following sub-sections.
System
Processor
Intel® Celeron® J1900, 2.0 GHz
Intel® N2807, 1.58 GHz
System Memory
204-pin DDR3L 1333MHz SODIMM x 1
Up to 8 GB (J1900); Up to 4 GB (N2807)
LCD/CRT Controller
Integrated in Processor
Ethernet
10/100/1000Base-TX, RJ-45 x 2
I/O Port
USB Type A x 1 for USB 3.0
USB Type A x 3 for USB 2.0
SMA antenna hole x 1
HDMI x 1
CFast™ x 1
DB-9 for RS-232/422/485 x 1
RJ-45 x 2 for 10/100/1000Base-TX
DB-15 x 1 for VGA
3-pin terminal block x 1 for 9~30 V DC power
input
LED Power On/Off Switch x 1 (Power on =
orange, Power off =N/A)
Storage Disk Drive
CFast™ socket x 1
SATA 2.5” HDD bay x 1
Chapter 1 Product Specifications 3
Industrial Modular Touch Panel
PC
OMNI
-
BT Series
System
Expansion Slot
Full Size Mini-Card x 2
OMNI I/O Connector x 1
SIM x 2
OS support
Windows® 7, Windows® 8, Windows® 10,
Linux kernel 2.6.x or higher
Power Supply
DC Input
DC 9 (min.) ~ 30 (max.) V w/ 3-pin terminal
block, ATX Power function
Chapter 1 Product Specifications 4
Industrial Modular Touch Panel
PC
OMNI
-
BT Series
1.1.1 OMNI-3105-BT
Mechanical
Construction
Aluminum design (IP65 Front Frame)
Mounting
VESA 100 / Panel Mount
Dimension
11.02” x 9.41” x 2.32” (280 mm x 239 mm x 59
mm)
Carton Dimension
16.34" x 7.05" x 15.39" (415mm x 179mm x
391mm)
Gross Weight
7.92 lbs. (3.6 kg)
Environmental
Operating Temperature
14°F ~ 131°F (-10°C ~ 55°C) (J1900),
14°F ~ 140°F (-10°C ~ 60°C) (N2807) with 0.5
m/s airflow ( CF & HDD )
Storage Temperature
-4°F ~ 158°F (-20°C ~ 70°C)
Storage Humidity
90% @ 40°C; non-condensing
Vibration
1 Grms/ 5~ 500Hz/ operation with HDD
Shock
15 G peak acceleration (11 msec. duration) with
HDD
EMC
CE/FCC class A
Chapter 1 Product Specifications 5
Industrial Modular Touch Panel
PC
OMNI
-
BT Series
LCD
Display Type
10.4" TFT-LCD, LED
Max Resolution
800 (H) x 600 (V)
Max. Colors
16.2M colors
Luminance
230 cd/m2
Viewing Angle
120° (H), 100° (V)
Back Light
LED
Back Light MTBF (Hours)
50,000
Touchscreen
Type
P-CAP/ 5-wire resistive
Light Transmission
P-CAP (90% ± 3%), 5-wire Resistive (80% ± 3%)
Chapter 1 Product Specifications 6
Industrial Modular Touch Panel
PC
OMNI
-
BT Series
1.1.2 OMNI-3125-BT
Mechanical
Construction
Aluminum design (IP65 Front Frame)
Mounting
VESA 100 / Panel Mount
Dimension
12.95” x 11.34” x 2.2” (329 mm x 288 mm x 56
mm)
Carton Dimension
20.87" x 17.52" x 7.87" (530mm x 445mm x
200mm)
Gross Weight
11 lbs. (5.0 kg)
Environmental
Operating Temperature
14°F ~ 131°F (-10°C ~ 55°C) (J1900),
14°F ~ 140°F (-10°C ~ 60°C) (N2807) with 0.5
m/s airflow ( CF & HDD )
Storage Temperature
-4°F ~ 158°F (-20°C ~ 70°C)
Storage Humidity
90% @ 40°C; non-condensing
Vibration
1 Grms/ 5~ 500Hz/ operation with HDD
Shock
15 G peak acceleration (11 msec. duration) with
HDD
EMC
CE/FCC class A
/