Aaeon OMNI-2155-BT User manual

Last Updated: May 3, 2019

OMNI-BT Series

Industrial Modular Touch Panel PC

With Intel® Bay Trail Platform

User’s Manual 3

rd

Ed

Preface II

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

Copyright Notice

This document is copyrighted, 2019. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

 Microsoft Windows is a registered trademark of Microsoft Corp.

 Intel, Pentium, Celeron, and Xeon

are registered trademarks of Intel Corporation

 Core, Atom are trademarks of Intel Corporation

 ITE is a trademark of Integrated Technology Express, Inc.

 IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines

Corporation.

All other product names or trademarks are properties of their respective owners.

Preface IV

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

 OMNI-BT Series Panel PC (panel size from 10.4 – 21.5”)

1

 Product DVD

1

 Phoenix Power connector

1

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver

installation instructions (if any), to facilitate users in setting up their product.

Users may refer to the product page at AAEON.com for the latest version of this

document.

Preface VI

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. All cables and adapters supplied by AAEON are certified and in accordance with

the material safety laws and regulations of the country of sale. Do not use any

cables or adapters not supplied by AAEON to prevent system malfunction or

fires.

3. Make sure the power source matches the power rating of the device.

4. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

5. Always completely disconnect the power before working on the system’s

hardware.

6. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

7. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

8. Always disconnect this device from any AC supply before cleaning.

9. While cleaning, use a damp cloth instead of liquid or spray detergents.

10. Make sure the device is installed near a power outlet and is easily accessible.

11. Keep this device away from humidity.

12. Place the device on a solid surface during installation to prevent falls

13. Do not cover the openings on the device to ensure optimal heat dissipation.

14. Watch out for high temperatures when the system is running.

15. Do not touch the heat sink or heat spreader when the system is running

16. Never pour any liquid into the openings. This could cause fire or electric shock.

Preface VII

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

17. As most electronic components are sensitive to static electrical charge, be sure

to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and contain all electronic components

in any static-shielded containers.

18. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

19. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept

any interference received including interference that may

cause undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local government’s recycling or

disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le

constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et

les directives gouvernementales de recyclage.

Preface IX

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON Panel PC/ Workstation

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

外壳

○

中央处理器

与内存

○

硬盘

○

液晶模块

○

光驱

○

触控模块

○

电源

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、触控模块为选购品。

Preface X

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products

AAEON Panel PC/ Workstation

Component

Poisonous or Hazardous Substances or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

Biphenyls

(PBB)

Polybrominated

Diphenyl Ethers

(PBDE)

PCB & Other

Components

O

○

Wires &

Connectors

for External

Connections

O

Chassis

O

CPU & RAM

O

Hard Disk

O

LCD

O

Optical Drive

O

Touchscreen

O

PSU

O

O：The quantity of poisonous or hazardous substances or elements found in each of the

component's parts is below the SJ/T 11363-2006-stipulated requirement.

X: The quantity of poisonous or hazardous substances or elements found in at least one of the

component's parts is beyond the SJ/T 11363-2006-stipulated requirement.

Note: The Environment Friendly Use Period as labeled on this product is applicable under normal

usage only

 
 
Preface    XI 
Industrial Modular Touch Panel
 
PC
 
 
 
OMNI
-
BT
 
Series
 
Table of Contents 
 
Chapter 1 - Product Specifications ........................................................................................ 1 
1  Specifications  2 
1.1  OMNI-3105-BT ............................................................................................ 4 
1.2  OMNI-3125-BT ............................................................................................ 6 
1.3  OMNI-3155-BT ............................................................................................ 8 
1.4  OMNI-2155-BT ........................................................................................... 10 
1.5  OMNI-3175-BT ........................................................................................... 12 
1.6  OMNI-3195-BT ........................................................................................... 14 
1.7  OMNI-2215-BT ........................................................................................... 16 
2  OMNI Modules  18 
2.1  USB/ COM/ LAN Module ........................................................................ 18 
2.2  Dual LAN Module...................................................................................... 18 
2.3  MiniCard and SIM Card Module ............................................................ 19 
2.4  RS-232/422/485 Module ......................................................................... 19 
2.5  Isolated RS-232/422/485 Module......................................................... 20 
2.6  Digital I/O Module ................................................................................... 20 
2.8  Audio Module ............................................................................................ 21 
2.9  HMS Module .............................................................................................. 21 
2.10  COM x 4 + DIO x 16 Module .................................................................. 21 
2.11  Wi-Fi 802.11 b/g/n Module ..................................................................... 22 
2.12  RS-485/422/232 x 2 Module ................................................................. 22 
Chapter 2 – Hardware Information ..................................................................................... 23 
1  Dimensions  24 
1.1  Dimensions: Main Panels ........................................................................ 24 
1.2  Dimensions: OMNI Modules .................................................................. 32 
1.3  Dimensions: Cables .................................................................................. 35 

 
 
Preface    XII 
Industrial Modular Touch Panel
 
PC
 
 
 
OMNI
-
BT
 
Series
 
2  List of Jumpers  36 
2.1  Clear CMOS (JP1) ...................................................................................... 37 
2.2  AT/ATX Mode Selection (JP3) ................................................................. 37 
2.3  LVDS Port Backlight Lightness Control Mode Selection (JP4) ......... 37 
2.4  LVDS Inverter Voltage Selection (JP5) .................................................. 37 
2.5  Touch Selection (JP8) ............................................................................... 38 
2.6  COM2 +12V/+5V/Ring Selection (JP9) ................................................ 38 
3  List of Connectors  39 
3.1  MiniCard Connector with On-board SIM (CN3) ................................ 40 
3.2  LPC Debug Port (CN4) ............................................................................. 41 
3.3  Battery Connector (CN6) ........................................................................ 42 
3.4  Cfast Connector (CN10) .......................................................................... 42 
3.5  Board to Board Connector (CN11) ........................................................ 43 
3.6  Panel Size Select (CN15) 17 inch LCD ................................................... 45 
3.7  LVDS Backlight Connector (CN17)......................................................... 45 
3.8  Mini PCIe Slot (CN18) ............................................................................... 45 
3.9  SATA Power Connector (CN19) .............................................................. 47 
3.10  SATA Connector (CN20) .......................................................................... 48 
3.11  LVDS Connector (CN21) .......................................................................... 48 
3.12  HDMI Connector (CN22) ........................................................................ 49 
3.13  Touchscreen Connector (CN29) ............................................................ 50 
3.14  LAN1 Connector (CN37) .......................................................................... 51 
3.15  LAN2 Connector (CN38).......................................................................... 51 
3.16  DC-in (CN39) ............................................................................................. 52 
3.17  COM2 Connector (CN40) ....................................................................... 52 
3.18  Remote Switch Connector (CN43) ........................................................ 53 
3.19  Combo connector (CN45) ...................................................................... 53 
4  Assembling Modules  55 

 
 
Preface    XIII 
Industrial Modular Touch Panel
 
PC
 
 
 
OMNI
-
BT
 
Series
 
5  Installing the Hard Disk Drive  57 
6  Installing DRAM  59 
7  Mount the OMNI onto the wall  60 
8  Assemble the OMNI panel and the CPU Box  62 
9  P-CAP Touch Screen Operating  65 
Chapter 3 - AMI BIOS Setup ................................................................................................ 66 
1  System Test and Initialization  67 
2  AMI BIOS Setup  68 
3  Setup Submenu: Main  69 
4  Setup Submenu: Advanced  70 
4.1  Advanced: CPU Configuration................................................................ 71 
4.2  Advanced: IDE Configuration ................................................................ 72 
4.3  Advanced: USB Configuration ............................................................... 73 
4.4  Advanced: Hardware Monitor ............................................................... 74 
4.5  Advanced: Power Management ............................................................ 75 
4.6  Advanced: Super IO Management ....................................................... 76 
4.6.1 Super IO Management: Serial Port 2 Configuration .................... 77 
4.6.2 Super IO Management: Serial Port 5 Configuration .................... 78 
4.6.3 Super IO Management: Serial Port 6 Configuration (Optional) . 79 
4.6.4 Super IO Management: Serial Port 7 Configuration (Optional) . 80 
4.6.5 Super IO Management: Serial Port 8 Configuration (Optional) .. 81 
5  Setup submenu: Chipset  82 
5.1  Chipset: North Bridge .............................................................................. 83 
5.1.1  North Bridge: Display Control Configuration................................. 84 
5.2  Chipset: South Bridge .............................................................................. 86 
6  Setup submenu: Security  87 
7  Setup submenu: Boot  88 
8  Boot: BBS Priorities  89 

 
 
Preface    XIV 
Industrial Modular Touch Panel
 
PC
 
 
 
OMNI
-
BT
 
Series
 
3.9  Setup submenu: Exit  90 
Chapter 4 – Drivers Installation & Touchscreen Settings .................................................. 91 
4.1  Product CD/DVD  92 
4.2  PCAP Dual Monitor Touch Settings  100 
Appendix A - Watchdog Timer Programming................................................................. 102 
A.1  Watchdog Timer Initial Program  103 
Appendix B - I/O Information ............................................................................................ 105 
B.1  I/O Address Map  106 
B.2  Memory Address Map  108 
B.3  IRQ Mapping Chart  109 
Appendix C – OMNI COM Module / UART Setting ......................................................... 112 
C.1  9741215513 [PER-T497], RS-232/422/485 x 2, I/O module  113 
C.2  9741215513 [PER-T371], OMNI COM x 2, USB x 2, LAN x 1, I/O module 117 
C.3  9741215516 – RS-232/422/485 x 4  121 
C.4  9741215517 – Isolation RS-232/422/485 x 4  125 
C.5  9741215518 [PER-T432], Isolation RS-232/422/485 x 4, DIO x 16 I/O 
Module 129 
C.6  UART mode setting  134 
 

Industrial Modular Touch Panel

PC

OMNI

-

BT

Series

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Industrial Modular Touch Panel

PC

OMNI

-

BT Series

1.1 Specifications

Specifications for System and Power Supply are same for all models/SKUs of OMNI-BT

series. All other specifications are listed by SKU in the following sub-sections.

System

Processor

Intel® Celeron® J1900, 2.0 GHz

Intel® N2807, 1.58 GHz

System Memory

204-pin DDR3L 1333MHz SODIMM x 1

Up to 8 GB (J1900); Up to 4 GB (N2807)

LCD/CRT Controller

Integrated in Processor

Ethernet

10/100/1000Base-TX, RJ-45 x 2

I/O Port

USB Type A x 1 for USB 3.0

USB Type A x 3 for USB 2.0

SMA antenna hole x 1

HDMI x 1

CFast™ x 1

DB-9 for RS-232/422/485 x 1

RJ-45 x 2 for 10/100/1000Base-TX

DB-15 x 1 for VGA

3-pin terminal block x 1 for 9~30 V DC power

input

LED Power On/Off Switch x 1 (Power on =

orange, Power off =N/A)

Storage Disk Drive

CFast™ socket x 1

SATA 2.5” HDD bay x 1

Chapter 1 – Product Specifications 3

Industrial Modular Touch Panel

PC

OMNI

-

BT Series

System

Expansion Slot

Full Size Mini-Card x 2

OMNI I/O Connector x 1

SIM x 2

OS support

Windows® 7, Windows® 8, Windows® 10,

Linux kernel 2.6.x or higher

Power Supply

DC Input

DC 9 (min.) ~ 30 (max.) V w/ 3-pin terminal

block, ATX Power function

Chapter 1 – Product Specifications 4

Industrial Modular Touch Panel

PC

OMNI

-

BT Series

1.1.1 OMNI-3105-BT

Mechanical

Construction

Aluminum design (IP65 Front Frame)

Mounting

VESA 100 / Panel Mount

Dimension

11.02” x 9.41” x 2.32” (280 mm x 239 mm x 59

mm)

Carton Dimension

16.34" x 7.05" x 15.39" (415mm x 179mm x

391mm)

Gross Weight

7.92 lbs. (3.6 kg)

Environmental

Operating Temperature

14°F ~ 131°F (-10°C ~ 55°C) (J1900),

14°F ~ 140°F (-10°C ~ 60°C) (N2807) with 0.5

m/s airflow ( CF & HDD )

Storage Temperature

-4°F ~ 158°F (-20°C ~ 70°C)

Storage Humidity

90% @ 40°C; non-condensing

Vibration

1 Grms/ 5~ 500Hz/ operation – with HDD

Shock

15 G peak acceleration (11 msec. duration) – with

HDD

EMC

CE/FCC class A

Chapter 1 – Product Specifications 5

Industrial Modular Touch Panel

PC

OMNI

-

BT Series

LCD

Display Type

10.4" TFT-LCD, LED

Max Resolution

800 (H) x 600 (V)

Max. Colors

16.2M colors

Luminance

230 cd/m2

Viewing Angle

120° (H), 100° (V)

Back Light

LED

Back Light MTBF (Hours)

50,000

Touchscreen

Type

P-CAP/ 5-wire resistive

Light Transmission

P-CAP (90% ± 3%), 5-wire Resistive (80% ± 3%)

Chapter 1 – Product Specifications 6

Industrial Modular Touch Panel

PC

OMNI

-

BT Series

1.1.2 OMNI-3125-BT

Mechanical

Construction

Aluminum design (IP65 Front Frame)

Mounting

VESA 100 / Panel Mount

Dimension

12.95” x 11.34” x 2.2” (329 mm x 288 mm x 56

mm)

Carton Dimension

20.87" x 17.52" x 7.87" (530mm x 445mm x

200mm)

Gross Weight

11 lbs. (5.0 kg)

Environmental

Operating Temperature

14°F ~ 131°F (-10°C ~ 55°C) (J1900),

14°F ~ 140°F (-10°C ~ 60°C) (N2807) with 0.5

m/s airflow ( CF & HDD )

Storage Temperature

-4°F ~ 158°F (-20°C ~ 70°C)

Storage Humidity

90% @ 40°C; non-condensing

Vibration

1 Grms/ 5~ 500Hz/ operation – with HDD

Shock

15 G peak acceleration (11 msec. duration) – with

HDD

EMC

CE/FCC class A

Page is loading ...

Aaeon OMNI-2155-BT User manual

This manual is also suitable for

Aaeon OMNI-2155-BT User manual

Related papers

Other documents