ESAB Bantam and Maxi Bantam are welding power sources designed for arc welding with coated electrodes ranging from 1.6 to 4 mm in diameter, providing precise welding current control. They feature a thermal cut-out with automatic reset for overload protection and an On/Off switch with a warning lamp. The Maxi Bantam offers dual voltage capability, allowing operation on either 230V or 400V mains power.
ESAB Bantam and Maxi Bantam are welding power sources designed for arc welding with coated electrodes ranging from 1.6 to 4 mm in diameter, providing precise welding current control. They feature a thermal cut-out with automatic reset for overload protection and an On/Off switch with a warning lamp. The Maxi Bantam offers dual voltage capability, allowing operation on either 230V or 400V mains power.
ESAB Bantam and Maxi Bantam are welding power sources designed for arc welding with coated electrodes ranging from 1.6 to 4 mm in diameter, providing precise welding current control. They feature a thermal cut-out with automatic reset for overload protection and an On/Off switch with a warning lamp. The Maxi Bantam offers dual voltage capability, allowing operation on either 230V or 400V mains power.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI