Features and specifications
Input resolutions
All resolutions up to UXGA @ 110 Hz,
including:
• XGA (1024x768) 0.8 million pixels
• SXGA (1280x1024) 1.3 million pixels
• UXGA (1600x1200) 1.9 million pixels
Bandwidth
Maximum analog input Bandwidth: 500MHz
@ 0.7 Vpp in
Maximum analog output Bandwidth:
250MHz @ 0.7 Vpp out [-3dB]
Maximum input pixel clock: 300 MHz
Maximum output pixel clock: 150 MHz
Compatibilities
• The D
UET II works with all projectors
independent of technology or brand
• The D
UET II is compatible with all common
switching devices, 3D graphics cards and
Barco solutions, like the V
IEWSCAPE
TM
multi-
windowing tool.
Video inputs
• 1 standard analog RGBHV input
(0.4 – 1 Vpp @ 75Ω and gain = 1)
• Composite sync, separate sync or sync on
green: TTL level (buffered loop-through) @
20 kΩ load
• The D9 female connector provides VESA-
EDID for the recognition of the graphical
mode.
• Automatic 75Ω termination
Stereo inputs
• Stereo signal between –12 /+12 V
• Supported connectors are: MiniDIN p3m,
MiniDIN p7m, DB9 (male and female), BNC
(other connectors available on request)
Video outputs
• 2 standard analog RGBHV outputs (0.7
Vpp @ 75Ω), left and right channel
• 2 digital DVI outputs, left and right
channel
• DB15 monitor loop-through feature
Control & monitoring functions
• D9 connector for RS-232 In/Out control
(up to 115200 baud)
• IR receiver for remote control (front)
• IR Mini-jack for wired remote control
(front), when the unit is not in the line-
of-sight of an RCU
• On Screen Display (OSD) menu
• LCD Display with advanced monitoring
capabilities
AC power
Built-in universal power supply for
operation on 85-230V, 50-60Hz
Power consumption
20 Watts
Safety regulations
The Barco D
UET II complies with UL 1950
Electromagnetic interference
The D
UET II complies with FCC part 15 Class A
Included cables
and connectors ft. m
Power Cord 240V 8.2 2.5
Power Cord 120V 8.2 2.5
MiniDIN(P3m) – MiniDIN(P3m) 5.9 1.80
MiniDIN (P3m) – BNC 6.6 2.00
DB9 – BNC 0.4 0.13
MiniDIN(P3m) – MiniDIN(P7m) 5.7 1.75
BNC–BNC connector - -
DB9 gender changer - -
Rack mountable
Can be built into standard 19'' rack.
Designed to operate in ambient rack
temperature up to 45°C (113°F)
Dimensions Inch mm
Width 1 19.00 483
Width 2 17.36 441
Depth 1 6.81 173
Depth 2 7.28 185
Height 1 3.47 88
Height 2 3.15 80
Shipping dimensions Inch mm
Width 22.44 570
Depth 14.17 360
Height 8.66 220
Weight Lbs. Kg
Shipping 3.2 1.43
D
UET II 7.7 3.50
Cables 1.6 0.72
Ordering info
Barco D
UET II R9898145
High resolution up to UXGA......................❍
Stereo-Lumens Boost Mode......................❍
Easy integration..........................................❍
Market-leading I-L
OCK
TM
Technology ............❍
High signal qualities ..................................❍
Compatible with V
IEWSCAPE
TM
......................❍
Rack Mountable Design.............................❍
✔
✔
✔
✔
✔
✔
✔
IR remote control.......................................❍
LCD monitoring display..............................❍
Supports both RGB & DVI ...........................❍
Barco proprietary technology Guarantee...❍
Industrial rugged design..............................❍
Available with I
NFITEC
TM
..................................❍
✔
✔
✔
✔
✔
✔
www.vr.barco.com | www.edutainment.barco.com
Barco Simulation
US Headquarters:
600 Bellbrook Avenue - Xenia, OH 45385-4053
Tel. +1 (937) 372-7579 • Fax +1 (937) 372-8645
email: eis@barco.com
European Headquarters:
Noordlaan 5, B8520 Kuurne - Belgium
Tel. +32 56 36 82 11 • Fax +32 56 36 86 51
email: info.simulation@barco.com
Ref.no. R599701 September 2003
Barco Simulation is an ISO 9001 registered company.
The information and data given are typical for the equipment described.
However any individual item is subject to change without any notice.
The latest version of this product sheet can be found on www.simulation.barco.com.
DuetII 09-09-2003 08:20 Pagina 2