AMS AS8510 User guide

AS8510
AMS
Brand
AMS
Model
AS8510
Type
User guide

AMS AS8510 is a high-precision data acquisition IC with programmable gain amplifiers, enabling precise signal conditioning and measurement of various input signals. Its key features include:

  • Programmable Gain Amplifiers: Allows adjustment of the gain to suit different input voltage ranges, supporting full-scale inputs from +/- 8 mV to +/- 160 mV.

  • Differential and Single-Ended Inputs: Accepts both fully differential and single-ended input signals, providing flexibility in connecting various sensors and signal sources.

  • Wide Common Mode Range: Supports a wide common mode range of +300 mV to -160 mV, making it suitable for applications with varying common mode voltage levels.

AMS AS8510 is a high-precision data acquisition IC with programmable gain amplifiers, enabling precise signal conditioning and measurement of various input signals. Its key features include:

  • Programmable Gain Amplifiers: Allows adjustment of the gain to suit different input voltage ranges, supporting full-scale inputs from +/- 8 mV to +/- 160 mV.

  • Differential and Single-Ended Inputs: Accepts both fully differential and single-ended input signals, providing flexibility in connecting various sensors and signal sources.

  • Wide Common Mode Range: Supports a wide common mode range of +300 mV to -160 mV, making it suitable for applications with varying common mode voltage levels.

austriamicrosystems AG
is now
ams AG
The technical content of this austriamicrosystems document is still valid.
Contact information:
Headquarters:
ams AG
Tobelbaderstrasse 30
8141 Unterpremstaetten, Austria
Tel: +43 (0) 3136 500 0
e-Mail: ams_sales@ams.com
Please visit our website at www.ams.com
AS8510 - Adapter Board Manual
www.austriamicrosystems.com/AS8510 Revision 1.00 1 - 5
AS8510
Adapter Board Manual
High Precision Data Acquisition IC
www.austriamicrosystems.com/Data_Acquisition_IC/AS8510
Picture 1: Block Diagram of AS8510
ams AG
Technical content still valid
AS8510 - Adapter Board Manual
www.austriamicrosystems.com/AS8510 Revision 1.00 2 - 5
General Description
Adapter Board Description
Picture 2: Adapter Board AS8510
This board supports quick start by providing foot prints and interconnect tracks for AS8510,
smoothing capacitors, input resistors, connectors and jumper posts.
The populated board may either be supplied by a single 3.3V source through VDD and VSS
connector posts if JP1-4 are set, or from two 3.3V sources of equal voltage to supply digital
DVDD/DVSS and analog AVDD/AVSS section of the AS8510 separately without jumpers. In
that case both supplies have to be powered up simultaneously.
After internal power on reset the device enters stop mode. The device will start operating in
normal mode when D[0] of MOD_CTL_REG 0A is set to 1 through SPI interface.
Signals may be provided through fully differential RSHH / RSHL and/or VBAT_IN /
VBAT_GND input terminals to integrated programmable gain amplifier. Common mode range
is +300 mV to – 160 mV versus VSS. There are 4 gain steps programmable to support input
voltages in the +/- 8 mV up to +/-160 mV full range
Programmable gain amplifiers can be by-passed to accept input voltages up to +/-1V at 0-1V
common mode versus VSS.
There are 2 more input channels ETR and ETS available multiplexed with VBAT/VBAT_GND
signal path. These are single ended input channels versus AVSS. Input signals can be
generated by forcing current through external 100 Ohm resistors through programmable
current source.
ams AG
Technical content still valid
AS8510 - Adapter Board Manual
www.austriamicrosystems.com/AS8510 Revision 1.00 3 - 5
Picture 3: Adapter Board AS8510 Layout
ams AG
Technical content still valid
AS8510 - Adapter Board Manual
www.austriamicrosystems.com/AS8510 Revision 1.00 4 - 5
P
icture
4
: Schematic Adapterboard AS8510
ams AG
Technical content still valid
AS8510 - Adapter Board Manual
www.austriamicrosystems.com/AS8510 Revision 1.00 5 - 5
Copyright
Copyright © 1997-20010, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-
Europe. Trademarks Registered ®. All rights reserved. The material herein may not be reproduced, adapted,
merged, translated, stored, or used without the prior written consent of the copyright owner.
All products and companies mentioned are trademarks or registered trademarks of their respective companies.
Disclaimer
Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions
appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by
description regarding the information set forth herein or regarding the freedom of the described devices from
patent infringement. Austriamicrosystems AG reserves the right to change specifications and prices at any time
and without notice. Therefore, prior to designing this product into a system, it is necessary to check with
austriamicrosystems AG for current information.
This product is intended for use in normal commercial applications. Applications requiring extended temperature
range, unusual environmental requirements, or high reliability applications, such as military, medical life-support
or life-sustaining equipment are specifically not recommended without additional processing by
austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might
show deviations from the standard production flow, such as test flow or test location.
The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However,
austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not
limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect,
special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing,
performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise
or flow out of austriamicrosystems AG rendering of technical or other services.
Contact Information
Headquarters
austriamicrosystems AG
Tobelbaderstrasse 30
A-8141 Unterpremstaetten - Graz
Austria
T. +43 (0) 3136 500 0
F. +43 (0) 3136 52501
Manfred Brandl: T. +43 (0) 3136 500 5336
[email protected]
For Sales Offices, Distributors and Representatives, please visit:
http://www.austriamicrosystems.com/contact-us
ams AG
Technical content still valid
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

AMS AS8510 User guide

AS8510
AMS
Brand
AMS
Model
AS8510
Type
User guide

AMS AS8510 is a high-precision data acquisition IC with programmable gain amplifiers, enabling precise signal conditioning and measurement of various input signals. Its key features include:

  • Programmable Gain Amplifiers: Allows adjustment of the gain to suit different input voltage ranges, supporting full-scale inputs from +/- 8 mV to +/- 160 mV.

  • Differential and Single-Ended Inputs: Accepts both fully differential and single-ended input signals, providing flexibility in connecting various sensors and signal sources.

  • Wide Common Mode Range: Supports a wide common mode range of +300 mV to -160 mV, making it suitable for applications with varying common mode voltage levels.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents