Haworth 7029-9676 Operating instructions

Brand
Haworth
Model
7029-9676
Type
Operating instructions
B
A
Slat Tile
Tackboard
Locate tackboard (A)
3/4"
A
FOR WALL MOUNT
D
Single Tackboard/Slat Tiles Sizes
23" up to 60"
Dual Tackboard/Slat Tiles Sizes
66" and Greater
Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1800-428 1 of 6 Part No:
Tackboard/Slat Tile
Installation Instructions
WOOD CASEGOODS
Scale 1 : 1
011/2
1/4 1/4
Tools Required
1
NOTE: Allow 3/4” clearance
above the tackboard (A) for
installation then mark corners
with tape (D).
#2
7029-9676/
120-9956
Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1800-428 2 of 6 Part No:
Use template to locate screws (E)
TEMPLATE FOR WALL MOUNT
Scale 1 : 1
011/2
1/4 1/4
2
NOTE: Due to varying wall construction,
athead fasteners and anchors are not
included and must be elding supplied.
3Install screws (E)
#10 Flat Head Screw
(E)
3-3/8”5-1/8”
6”
BOTTOM SCREWS
TOP SCREWS
3-3/8”5-1/8”
6”
BOTTOM SCREWS
TOP SCREWS
3-3/8”5-1/8”
6”
BOTTOM SCREWS
TOP SCREWS
3-3/8”5-1/8”
6”
BOTTOM SCREWS
TOP SCREWS
3-3/8”5-1/8”
6”
BOTTOM SCREWS 14”-17”
TOP SCREWS
3/16"
E
3-3/8”5-1/8”
6”
BOTTOM SCREWS
TOP SCREWS
WALL MOUNT TEMPLATE
7029-9676/
120-9956
Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1800-428 3 of 6 Part No:
5
6
FOR TACKBOARD
Determine location of screws (E)
FOR SLAT TILE
2"
6"
B
C
5"
4-7/16"
B
A
Install screws (E)
3/16"
E
#10 Flat Head Screw
(E)
A
NOTE: Due to varying wall
construction, athead fasteners
and anchors are not included
and must be elding supplied.
4Install board (A)
A
E
7029-9676/
120-9956
FOR SLAT TILE
Remove tackboard (A)
E
B
4-7/16"
B
C
Tackboard/Slat Tiles Sizes
23" up to 36"
Tackboard/Slat Tiles Sizes
36" and Greater
Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1800-428 4 of 6 Part No:
7
Install slat tile (B)
8
NOTE: Adjust bracket
location if required to
screw into stud.
B
7029-9676/
120-9956
Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1800-428 5 of 6 Part No:
9Install tackboard (A)
1
FOR VSU MOUNT
Repeat steps 1though 6 as required
3/16"
E
A
E
A
B
A
E
OR
E
A
B
1 2
3
3
7029-9676/
120-9956
Repeat steps 1though 6 as required
TEMPLATE FOR OSU CUBBY MOUNT
Scale 1 : 1
011/2
1/4 1/4
1
Use template to locate screws (E)
2
2-9/16”3-5/8”
6”
BOTTOM SCREWS 9”-11”
TOP SCREWS
OSU CUBBY TEMPLATE
Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1800-428 6 of 6 Part No:
A
A
B
3/16"
E1
E
2
2
7029-9676/
120-9956
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Haworth 7029-9676 Operating instructions

Brand
Haworth
Model
7029-9676
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents