jbc RMSE System Owner's manual

RMSE System
jbc
Brand
jbc
Model
RMSE System
Type
Owner's manual

jbc RMSE System is a complete rework station designed for professional use in electronics assembly and repair. It features a 2-tool control unit, a power hot air control unit, an electric desoldering module, and a range of interchangeable handles and tips. The system is capable of soldering, desoldering, hot air rework, and pick and place operations. It is ESD safe and complies with CE standards. Register your product within 30 days of purchase to receive a 2-year warranty.

jbc RMSE System is a complete rework station designed for professional use in electronics assembly and repair. It features a 2-tool control unit, a power hot air control unit, an electric desoldering module, and a range of interchangeable handles and tips. The system is capable of soldering, desoldering, hot air rework, and pick and place operations. It is ESD safe and complies with CE standards. Register your product within 30 days of purchase to receive a 2-year warranty.

Station
More Information at the
product web page
RMSE
Complete Rework System
This Plug & Play Guide corresponds to the following references:
Ref.
RMSE-9QF (100 V)
RMSE-1QF (120 V)
RMSE-2QF (230 V)
2
Heater Hose Set ............................................................................. 1 unit
Ref. JT-T1A (100 V / 120 V)
Ref. JT-T2A (230 V)
JN Nozzles for JTT ...................................................................... 3 units
Ref. JN2012 .............................................................................................................. 1x
Ref. JN2015 .............................................................................................................. 1x
Ref. JN2020 ............................................................................................................. 1x
Desoldering Iron ............................................................................ 1 unit
Ref. DR560-A
(C560003 already assembled)
Electric Desoldering Module ..................................................... 1 unit
Ref. MSE-A
2-Tool Control Unit ................................................................ 1 unit
Ref. DDE-9C (100 V)
Ref. DDE-1C (120 V)
Ref. DDE-2C (230 V)
Packing List
The following items are included according to purchased station reference:
Power Hot Air Control Unit ......................................................... 1 unit
Ref. JTSE-9UA (100 V)
Ref. JTSE-1UA (120 V)
Ref. JTSE-2UA (230 V)
General Purpose Handle ............................................................. 1 unit
Ref. T245-A
(Cartridge not included)
Pick & Place Handle .................................................................... 1 unit
Ref. T260-A
3
Stand for T210 & T245 ................................................................. 1 unit
Ref. AD-SF
Stand for DR560 ........................................................................... 1 unit
Ref. DR-SF
Stand for JTT ................................................................................. 1 unit
Ref. JT-SF
Magazine for Protectors and Extractors ............................... 1 unit
Ref. ESHT-A
Thermocouple Type K .................................................................. 1 unit
Ref. PH218
Holder for Cartridges and Tips ............................................. 1 unit
Ref. SCH-A
Kapton Tape .................................................................................... 1 unit
Ref. PH217
Module Cable
Ref. 0024228
Stand Cable
Ref. 0024227
4
DRS
Stand for DR560
Desoldering Iron
ADS
Stand for T210 &
T245 Handles
Installation
DR560
Desoldering Iron
T245
General Purpose
Handle
DDE
2-Tool Control Unit
Stand Cable
Ref. 0024227
MSE
Electric Desoldering Module for DDE
& DME
Suction
Filter
Ref. 0821830
To another peripheral
C245 *
Cartridge Range
C560 *
Tip Range
Power Cord
Included in DDE Control Unit
* Not included, sold separately.
To P405 Pedal
5
JTSE
Power Hot Air Control Unit
JTS
Stand for JTT Heater
Hose Set
T260
Pick & Place Handle
JTT
Heater Hose Set
Installation
Front View
Rear View
JN
Nozzle Range
To P405 Pedal
Power Cord
Included in JTSE Control Unit
Thermocouple Connector
Notes
6
Notes
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized
recycling facility.
Warranty
Get 2 year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
RMSE
Complete Rework System
Ref. RMSE-9QF (100 V)
Ref. RMSE-1QF (120 V)
Ref. RMSE-2QF (230 V)
- Net Weight: 14.6 kg / 32.09 lb
- Package Dimensions / Weight: 700 x 410 x 390 mm / 20.2 kg
(L x H x W) 27.56 x 16.14 x 15.35 in / 44.53 lb
Complies with CE standards.
ESD safe.
0032649-03112 3
Specifications
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

jbc RMSE System Owner's manual

RMSE System
jbc
Brand
jbc
Model
RMSE System
Type
Owner's manual

jbc RMSE System is a complete rework station designed for professional use in electronics assembly and repair. It features a 2-tool control unit, a power hot air control unit, an electric desoldering module, and a range of interchangeable handles and tips. The system is capable of soldering, desoldering, hot air rework, and pick and place operations. It is ESD safe and complies with CE standards. Register your product within 30 days of purchase to receive a 2-year warranty.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers