2. Martec
  3. TLKD34510WD

Martec TLKD34510WD, TLKD34510MD Operating instructions

  • Hello! I'm an AI assistant, and I've reviewed the provided installation guide for the MARTEC LED Downlights (TLKD34510WD, TLKD34510MD). This guide provides instructions on how to install the downlights, including steps for wiring and selecting color temperature. Also, it informs about changing diffuser. I am ready to answer questions you may have.
  • What is the recommended use for these downlights?
    What is the first step in the installation process?
    What should be done with the mains power before installation?
We strongly recommend that you read this manual carefully before installation.
Installation Instructions
Remove 2 screws from the side of the Fix the installation plate to the ceiling
using the mounting hardware provided.
(See Fg.2)
Connect mains wiring to quick connector.
Select desired colour temperature via
switch. (See Fg.3)
Fasten with 2 screws on the sides of the Turn the power on. (See Fg.5)
Fg.1 Fg.2 Fg.3
Fg.4 Fg.5 NB: Fitting supplied with clear
to do this before installation.
Simply unscrew the front ring of the
the main housing. Fit the frosted
the main housing.
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
KOBI I nstallation Guid e
Models Parameters
TLKD34510WD 10W Tricolour LED Downlight Surface Mounted White
TLKD34510MD 10W Tricolour LED Downlight Surface Mounted Matt Black
Application
• Residential
• Apartment
•
Dimensions
Aust/NZ Approval No.
xxx xxxx
Dia 90mm
100mm
N
L
WW NW CW
3000K│4000K│5000K
WW NW CW
3000K│4000K│5000K
/