Abus FU8300 Datasheet

Category
Security device components
Type
Datasheet
ABUS Security-Center
FU8300
Secvest 2WAY Wireless Panic Alarm Button
Product highlights:
• Convenient flush-mounting
• Triggers a silent alarm
• Material made of thermoplastics
• Tamper monitoring
• Coverage up to 50 meters
The Secvest 2WAY wireless panic alarm button is a detector of the
Secvest (or the Terxon with a wireless expansion module). By
pressing the button, you can easily and discreetly trigger a robbery
alarm if you need help. The wireless panic alarm button is taught-in
with the Secvest as a zone with "robbery" property. This zone is
monitored and the button will trigger an alarm even when the control
panel is disarmed. In the system settings of the Secvest you can
determine whether it is a local or silent alarm. Some ideal locations
for the wireless panic button would be bedrooms, entrances and
under a shop
counter.
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
ABUS Security-Center
FU8300
Secvest 2WAY Wireless Panic Alarm Button
Technical Data
power supply 3V lithium battery, size CR2450
Degree of protection IP32
Battery service life up to 2 years
Environmental class II (-10°C to +50°C)
Coverage up to 50 m (depending on environment)
Degree of safety 2
Housing material thermoplastics
Operating frequency 868.6625 Mhz FM, narrow band
Dimensions (HxWxD) 85x85x52 mm
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
  • Page 1 1
  • Page 2 2

Abus FU8300 Datasheet

Category
Security device components
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI