Bang & Olufsen BEO4 Owner's manual

Brand: Bang & Olufsen

Model: BEO4

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

Beo4 Series

Bang & Olufsen Beo4 is a user-friendly remote control designed to enhance your Bang & Olufsen audio and video system experience. With its intuitive interface and central star-shaped button layout, daily operations like switching sources, adjusting volume, and navigating on-screen menus are a breeze. Beyond basic controls, Beo4 offers customizable extra "buttons" accessible via the LIST button, allowing you to tailor the remote to your specific needs and preferences.

About Beo4 and this guide…

This guide describes the principles of

operation for the Beo4 remote control, and

explains how to set up the Beo4 to match your

particular Bang & Olufsen systems.

Specific Beo4 operating instructions are found

in the User’s guides for the Bang & Olufsen

products which are designed for operation

with the Beo4 remote control.

If you have a Bang & Olufsen product which

has been designed for operation with another

recent Bang & Olufsen remote control, you

will find that the buttons on the Beo4 and the

“buttons” in the Beo4 display enable you to

operate the basic, daily functions in such a

product as well.

Beo4 principles of operation

4 Using the Beo4 remote control

Beo4 buttons in detail

6 Daily and advanced operation with Beo4

buttons

Extra Beo4 “buttons”

8 Calling up extra “buttons” in the Beo4

display via the LIST button

Customising your Beo4

10 Set up or extend your Beo4

11 Add an extra “button”

12 Rearrange the order of extra Beo4

“buttons”

13 Remove an extra “button”

Taking care of your Beo4

14 Cleaning your Beo4

14 Changing the batteries

Beo4 Lexicon of extra “buttons”

16 Explanation of Beo4 extra “buttons”

CONTENTS

The Beo4 is a hand-held remote control which

gives easy access to remote operation of your

Bang & Olufsen audio and/or video system.

Daily operations are carried out by pressing a

single button on the Beo4, or by pressing a

few buttons in a logical and straightforward

sequence.

The display on Beo4 keeps you informed of

which source you are operating: TV, RADIO,

Video tape recorder (V TAPE), CD or DVD

player, the audio tape recorder (A TAPE), or

even the lights (LIGHT)…

But the Beo4 remote control incorporates

more functions than just the actual buttons:

Extra sources can be switched on, and

additional functions can be obtained via the

display. “Buttons” for these functions can be

called up on the Beo4 display via the LIST

button.

Whether you use the Beo4 buttons for daily

operation, or call up extra “buttons” for

functions or sources in the display, you will

find that Beo4 remote operation is easy…

Using your Beo4 remote control

456

TEXT 0MENU

123

LIST

STOP

The Beo4 remote control – you will find all the

buttons you need for daily operation centred

in and around the star-shaped button,

conveniently placed for operation with your

thumb.

BEO4 PRINCIPLES OF…

The Beo4 display tells you which source you

are operating. It is also used for calling up

extra “buttons” for different functions or

sources.

Source buttons and buttons for recording

Number keys; and buttons for Teletext and

on-screen menus

Control buttons within the star-shaped

button

Volume, stop and exit buttons; and LIST

button for calling up extra “buttons” in the

Beo4 display.

Beo4 remote control

…OPERATION

TV LIGHT RADIO

SAT DVD CD

V TAPE RECORD A TAPE

789

456

TEXT 0MENU

123

LIST EXIT

STOP

BEO4 BUTTONS IN DETAIL

Daily and advanced operation with Beo4 buttons

The buttons on the Beo4 remote control are

conveniently grouped for daily operation…

TV LIGHT RADIO

SAT DVD CD

V TAPE RECORD A TAPE

789

V TAPE RECORD A TAPE

789

456

TEXT 0MENU

123

Source buttons… TV, SAT, V TAPE, RADIO,

DVD, CD, A TAPE, and LIGHT are used for

switching on your Bang & Olufsen audio and

video products, other audio/video

integrated systems and the Bang & Olufsen

light control.*

RECORD button… is situated close to the

source buttons to enable easy recording on

a video or audio tape recorder.

Number keys… 0 through to 9 are used

whenever you have to key in numbers, for

example to select an exact TV or radio

program number, to select Teletext pages or

to select specific tracks on a CD, DVD disc or

a audio or video tape.

TEXT and MENU buttons… gives access to

Teletext on your Bang & Olufsen TV and

calls up the on-screen menus for your

Bang & Olufsen video products.

*Note: Some externally connected products

may have to be switched on via the LIST

button and subsequent relevant “buttons” or

cues shown in the Beo4 display.

TEXT 0MENU

LIST EXIT

STOP

Control buttons within the star-shaped

button…

▲and ▼… allow you to step through

program numbers or tracks. On some audio

systems, they act as On or Off buttons

respectively for a Random, Repeat or Edit

function.

ss and tt … allow you to wind through an

audio or video tape or a CD on a single CD

player. On a multiple CD player the wind

buttons are used to change from CD to CD.

GO button… is used for accepting various

types of operations; and to resume playing

the source which is shown in the Beo4

display.

Coloured buttons… are for special operations.

It will be explained in the User’s guide for

your Bang & Olufsen product when and how

to use the buttons.

Volume, stop and exit buttons; and LIST

button for calling up extra “buttons” in the

Beo4 display…

Volume button… ∧and ∨in the centre turns

the sound in the loudspeakers up or down.

Press the volume button right on the middle

to mute the speakers completely, press the

button again to bring the sound back.

STOP button… is used for various stop

functions, for example, to stop playback on

a source.

EXIT button… exits Beo4 display operation;

and removes on-screen menus.

LIST button… pressing it repeatedly displays

extra “buttons” for functions or sources in

the Beo4 display.

Standby button •…the red standby button

switches your Bang & Olufsen system off.

EXTRA BEO4 “BUTTONS”

Calling up extra “buttons” in the Beo4 display

The buttons on your Beo4 remote control give

access to direct remote control of a large

number of functions in your entire Bang &

Olufsen system.

However, the display combined with the LIST

button on the Beo4 enables you to operate

even more functions or sources. Each time you

press LIST on Beo4, a new “button” appears in

the display which represents an extra function

or source that you can operate via your Beo4…

•Whenever a source is displayed on the Beo4

(TV, RADIO, CD, …), you can call up extra

“buttons” in the display to operate that

particular source, e.g. STAND to turn the TV,

FORMAT to change the size and shape of the

picture on the screen, and so on.

•You can also switch on extra products

connected to your Bang & Olufsen audio or

video system via the Beo4 display, e.g.

VTAPE2 an extra video tape recorder.

These extra “buttons” can be edited, though.

You can add new “buttons” from the Beo4

setup list if necessary, rearrange the manner in

which these chosen “buttons” appear on the

Beo4 display or even remove them from the

list of extra “buttons” that you access directly.

For further information of how to edit the

Beo4 list of extra “buttons”, please refer to

the chapter Customising your Beo4.

LIST

The Beo4 display acts as a status display and

tells you which source you are currently

operating. But each time you press the LIST

button, you will see a new “button” or cue in

the Beo4 display.

When calling up extra “buttons”…

You can either hold the LIST button down to

make the “buttons” appear successively in the

display; or press LIST repeatedly to step

through them one by one.

When you have found the “button” you want,

you must either press the GO button to switch

on (activate) the function, or start operating

the function directly using the Beo4 buttons.

When you have finished operating the extra

function, then press EXIT or a source button

e.g. TV to remove the “button” from the Beo4

display, and return to controlling the original

source e.g. TV.

Note: An extra “button” in the Beo4 display,

however, only gives access to operating a

function, if that function is offered by your

particular Bang & Olufsen product.,

Using the Beo4 LIST button in combination with

the display…

Press LIST repeatedly or continuously

until the “button” you want is

displayed

When you have found the “button”

you want…

Press GO to access the function or

switch on the extra source

Or…

Press the relevant buttons to start

operating the function, for example,

ss tt or ▲▼…

Press EXIT to return to your original

source

Press a source button e.g. TV to

return to controlling TV

Please note…

Not all Bang & Olufsen products (for

example not all TVs) offer the same set of

functions. That is why the Beo4 is specially

set up to match your particular Bang &

Olufsen system(s).

LIST

then

EXIT

CUSTOMISING YOUR BEO4

Set up and extend your Beo4

The Beo4 remote control is set up to match

your Bang & Olufsen systems. In most cases,

the relevant extra Beo4 “buttons” shown in

the display are already available, however, you

can still customise your Beo4 to suit your

specific demands or products.

You can set the Beo4 up so that only the extra

“buttons” that you feel are relevant are

included. You may remove any "button" or

add a "button" yourself, if necessary. You can

also rearrange the order in which the extra

“buttons” appear when you press LIST.

To add, move or remove extra "buttons", you

must access the Beo4 setup function, and find

ADD? (for adding a “button”), MOVE? (for

rearranging the order of “buttons”), or

REMOVE? (for removing a “button”).

*Please note…

If you wish to find out what the various extra

Beo4 “buttons” or setup functions imply, then

turn to the Beo4 Lexicon at the back of this

guide for further information and

explanation.

LIST

The Beo4 setup function consists of a number

of different functions. The first three

“buttons” or functions refer to how you

customise Beo4, adding, moving or removing

individual extra “buttons” used in your daily

operation. The remaining setup functions

relate to the products your Beo4 operates*.

GO 3

Add an extra “button” to Beo4

You can add extra “buttons” to Beo4 which

can then be used on a daily basis. When you

add a “button”, you can chose to place your

new “button” – somewhere in-between, on its

preset position or at the top*.

When the “button” you want is displayed,

then add the “button” and choose where you

want it. The next time you press LIST on Beo4,

the new “button” will appear in the display.

*Note: The “button” you add will only be

placed at the top of the list if you have already

added another “button” and placed it in a

specific position, or if you have used the move

facility in the Beo4 setup function.

To be able to add extra “buttons”…

Press and hold the standby button

down

Press LIST to get access to the special

Beo4 setup function

Now, let go of both buttons…

ADD? appears in the display…

Press GO to call up the list of

“buttons” you want to add from

The first “button” appears in the

display, it flashes on and off…

Press LIST until the “button” you

want to add is displayed

Or, press any of the control buttons, ▲▼

or ss tt to move forwards or backwards in

the list of all extra “buttons”…

Press GO to add and place it on its

preset position or as the first

“button”in the list of your extra

“buttons”

Or…

Press a number key e.g. 3 to insert

the added “button” on a specific

position in the list of your extra

“buttons”

When ADDED appears in the display, the button”

has been added and you then leave the Beo4

setup automatically…

LIST

then

•

then

LIST

then

>Customising your Beo4

To be able to move extra “buttons”…

Press and hold the standby button

down

Press LIST to get access to the Beo4

setup function

Now, let go of both buttons…

ADD?appears in the display…

Press LIST until MOVE? is displayed

Press GO to call up the Beo4 list of

extra “buttons”

The first “button” appears in the

display…

Press LIST until the “button” you

want to move is displayed

Or, press any of the control buttons,

▲▼or ss tt to move forwards or

backwards in the list of your extra

“buttons”…

Press GO to move and place it as the

first “button” in the list of your

extra “buttons”

Or…

Press a number key e.g. 3 to insert

the “button” you move into a

specific position in the list of your

extra “buttons”

When MOVED appears in the display, the “button”

has been moved and you then leave the Beo4

setup automatically…

LIST

then

•

then

LIST

then

Rearrange the order of extra Beo4 “buttons”

GO 3

You can rearrange the list of extra “buttons”

that you yourself have added and the ones

that were already present when you press LIST.

When you add a “button”, you can chose

where you want your new “button”– at the

top so that it always appears as the number

one extra “button” or place it somewhere in-

between.

Note: If you wish to move more than one

‘button’ in your Beo4 list of extra “buttons”,

e.g. FORMAT and STAND, then make sure that

you move FORMAT first and then STAND if you

want STAND to appear as your first extra

“button” when you press LIST.

LIST

Remove an extra Beo4 “button”

You can remove any of the extra “buttons”

that are currently available when you press

LIST.

The next time you operate your Bang &

Olufsen product, the “button” you removed

will no longer be available in the display.

However, removing an extra “button” does

not mean that it is actually deleted from Beo4.

You can always add the “button” again via

ADD? in the Beo4 setup function.

Note: Some of the extra “buttons” cannot be

removed. The “buttons” which appear when

you add V.SETUP or A.SETUP e.g. BASS, TREBLE

cannot be removed as they belong to this

main “button”. To remove them you must

remove V.SETUP or A.SETUP.

To be able to remove extra “buttons”…

Press and hold the standby button

down

Press LIST to get access to the special

Beo4 setup function

Now, let go of both buttons…

ADD?appears in the display…

Press LIST until REMOVE? is displayed

The first “button” in the Beo4 list of

all your available extra “buttons”

appears in the display…

Press LIST until the “button” you

want to remove is displayed

Or, press any of the control buttons, ▲▼

or ss tt to move forwards or backwards in

the list of your extra “buttons”…

Press GO to remove the “button”

you have chosen

When REMOVED appears in the display, the

“button” has been removed and you then leave

the Beo4 setup function automatically…

then

•

LIST

then

LIST

then

LIST

then

TAKING CARE OF BEO4

Cleaning the Beo4…

Wipe the Beo4 remote control with a soft, lint-

free, wet cloth which is wrung firmly.

Changing the batteries…

When BATTERY appears in the Beo4 display, it

is time to change the batteries in the remote

control.

The Beo4 requires three batteries (placed

under the lid on the back). We recommend

that you use 1.5 volt (size AAA) Alkaline

batteries only.

Replace the batteries as shown on this page…

When you have replaced the batteries, you

must wait for about 10 seconds until the

display reads TV. The Beo4 remote control is

then ready to operate again.

Note: We recommend that you keep a finger

on top of the batteries until the lid is replaced.

The three batteries in the Beo4 are placed

under the lid on the back.

BEO4 LEXICON…

ADD? Appears as an option in the Beo4 setup

mode. Enables you to add extra “buttons” to

the Beo4 display. Access the Beo4 setup mode

and call up ADD?, press GO and start to reveal

the “buttons” you can add – press GO to add

the “button” currently displayed as the first

extra ”button” when you press LIST – or press

e.g. 3 to place it as number 3 in the list of all

your extra “buttons”.

AUDIO? For selecting an Audio product setup for

Beo4. Product setups BS9000 and BASIC are

available.

AV Indicates that the audio/video function is

activated, transferring e.g. TV sound to the

speakers connected to an audio system or vice

versa. This only applies if your Video and Audio

system is interconnected.

AVANT Indicates the Beo4 Video product setup

dedicated to BeoVision Avant.

AVANTUS Indicates the Beo4 Video product setup

dedicated to the BeoVision Avant US version.

AV5 Indicates the Beo4 Video product setup

dedicated to BeoCenter AV5.

AV9000 Indicates the Beo4 Video product setup

dedicated to BeoSystem AV9000.

A.OPT (audio option) For programming a system

setup for audio systems. Please refer to

OPTION? for a further explanation

A.SETUP (audio setup) Gives access to a list of

extra “buttons” required for sound adjustment

of certain Bang & Olufsen audio systems,

A.SETUP must be added in order to be able to

reveal the following "buttons" for sound

adjustment:

BASS – gives access to adjusting Bass levels for

an audio system.

TREBLE – gives access to adjusting Treble levels

for an audio system.

LOUDNSS (loudness) – Gives access to setting

Loudness to On or Off, please refer to

LOUDNSS for further information.

S.STORE (Sound Store) – gives access to storing

sound adjustments, please see S.STORE for

further information.

A.TAPE (audio tape recorder) Appears in the

display when you press the Beo4 A TAPE

button. Any operation you carry out on the

Beo4 will be directed to your Bang & Olufsen

audio tape recorder.

A.TAPE2 (audio tape recorder 2) For switching on

a second audio tape recorder connected to

your Bang & Olufsen audio system.

A.AUX (audio auxiliary source) For switching on

any extra equipment connected to your Bang &

Olufsen audio system.

BASIC Indicates the Beo4 Audio product setup for

all Bang & Olufsen audio systems other than

BeoSound 9000

BASS For sound adjustment of bass levels in

certain Bang & Olufsen systems. In order to get

access to BASS you must add either A.SETUP or

V.SETUP as appropriate. If you wish to store

sound adjustments, refer to S.STORE (Sound

Store) for further information.

BATTERY Indicates that it is time to change the

batteries in the Beo4 remote control.

BC1 Indicates a dedicated Beo4 Video product

setup. For future use.

BV1 Indicates a dedicated Beo4 Video product

setup. For future use.

BS9000 Indicates the Beo4 Audio product setup

dedicated to BeoSound 9000.

CAMCORD (Camcorder) For selection of

CamCorder input on Bang & Olufsen video

systems.

CD (compact disc player) Appears in the display

when you press the Beo4 CD button. Any

operation you carry out on the Beo4 will be

directed to your Bang & Olufsen CD player.

CD2 (compact disc player 2) For switching on a

second CD player in certain Bang & Olufsen

audio systems.

CDV (compact disc video player) For switching on

to a compact disc video player connected to

your Bang & Olufsen video system.

…OF EXTRA “BUTTONS”17

CLEAR For clearing program numbers on recent

Bang & Olufsen TV sets. In order to get access

to CLEAR, V.SETUP must be added first.

CLOCK Displays the time on certain Bang &

Olufsen products. Please refer to the

appropriate User’s guide for the product in

question for further information.

CONFIG? Enables you to programme a dedicated

product setup for Beo4. You can select product

setups for video and audio products.

COUNTER (counter position) Allows you to find a

specific counter position on a video tape. Press

LIST repeatedly to reveal COUNTER and then

just key in the appropriate counter position

using the number keys.

DOORCAM (Door camera) For special Bang &

Olufsen applications.

DVD (digital versatile disc) Appears in the display

when you press the Beo4 DVD button. Any

operation you carry out on Beo4 will be

directed to your DVD player.

EDIT Used for playback of a preprogrammed

sequence of CD tracks on BeoSound 9000.

FORMAT (picture format) For optimising the

picture format on a Bang & Olufsen wide-

screen video system. Please refer to the

relevant User’s guide for further information.

INDEX (Teletext index page) Calls up the Teletext

index page (p.100). Add INDEX to the Beo4 list

of functions. Access Teletext by pressing TEXT

and press LIST repeatedly to reveal INDEX and

press GO to call up the page.

LAMP (lamp light control) For switching on a

particular lamp in your light setup – requires

the installation of a Bang & Olufsen light

control unit. Press LIST to reveal LAMP, add the

“button” if it is not already available, then key

in the appropriate number for a lamp (1 – 9).

LARGE (Teletext: Large) Used on certain Bang &

Olufsen TVs for enlarging the Teletext page

you are watching. Access Teletext, then

press LIST repeatedly to display LARGE and

press GO to enlarge part of the page. Press

GO to enlarge the second half of the page

and press GO to return the page to normal

Teletext page size.

LIGHT (light control) Appears in the display when

you press the Beo4 LIGHT button. Any operation

you carry out on the Beo4 will be directed

towards your Bang & Olufsen light control(s).

LINK Must be used where the use of a LINK

button is normally specified. LINK must be

added to your Beo4 to achieve the following:

1. If it is desired that a decoder in the main

room can be accessed from a video link room,

e.g. display LINK in the Beo4 display and then

press TV to do so.

2. If the same source is available in both link

and main room, e.g. if access is desired in the

link room to a Video tape recorder (VTR) in the

main room instead of the VTR present in the

link room, display LINK in the Beo4 display and

then press V TAPE to do so.

3. If a link room product, e.g. BeoLab 3500, is

placed in the same room as a main room

product, e.g. Avant and Ouverture. (Option 4)

4. For compatibility setups, where e.g. an X-tra

speaker kit is placed in a link room together

with a TV, or, where e.g. an X-tra TV kit is

placed in a link room together with an old

Bang & Olufsen TV, e.g. a LX2802 TV.

To activate any link setups, display LINK on

Beo4 and then press the appropriate source

button (TV, RADIO, CD, A TAPE, V TAPE).

L-PHONO (link PHONO) For selecting LINK and

then PHONO.

L-V.TP2 (link video tape recorder 2) For selecting

LINK and then V.TAPE2.

LINK-AV (link audio/video) Used to obtain stereo

sound from your main Bang & Olufsen video

system in a link room with a secondary video

source, usually TV. The function is useful when

a TV decoder is connected to the main video

system. Add it to the Beo4 list of functions,

press LIST to reveal LINK-AV and then press TV

to do so.

L.OPT (link option) For programming a system

setup for link room products. Use L.OPT for

programming a link option. Refer to OPTION?

for further information.

LOUDNSS (loudness) For switching the loudness

function on/off in certain Bang & Olufsen

systems. LOUDNSS is only available if A.SETUP

or V.SETUP has been added. The loudness

function compensates for the human ear’s

diminished sensitivity to high and low bass and

treble levels when listening to low volume

levels. Press LIST to reveal LOUDNSS and then

press GO repeatedly to set loudness to on or

off. If you wish to store your adjustment, refer

to S.STORE (Sound Store) for further

information.

MIX (Teletext: Mix) Used on certain Bang &

Olufsen TVs to superimpose the Teletext page

on the TV picture. Access Teletext, press LIST

repeatedly to reveal MIX and then press GO.

MOVE? Appears as an option in the Beo4 setup

mode, Enables you to rearrange the order in

which the extra “buttons” in the Beo4 display

appear. Access the Beo4 setup mode and call

up MOVE?, press GO and start to reveal the

“buttons” you can move – press GO to move

the “button” currently displayed in as the first

extra ”button” when you press LIST – or press

e.g. 3 to place it as number 3 in the list of all

your extra “buttons”.

MX Indicates the Beo4 Video product setup

dedicated to BeoVision MX. The MX product

setup should also be used for older versions of

BeoVision MX TVs and other older Bang &

Olufsen video systems. In order to tune and

preset such systems, you must add V.SETUP.

NONE Indicates the Beo4 Video product setup

NONE. Used if you want to programme a Beo4

with an Audio product setup only – without

including any video List functions.

OPTION? (option programming) Appears when

you access the Beo4 setup mode (Press Standby

and LIST, then press LIST repeatedly). Enables

you to preprogramme a Bang & Olufsen system

setup. Press GO, then LIST to display the type of

option preprogramming you want to make:

V.OPT (video option)

A.OPT (audio option)

L.OPT (link option)

When the right option is displayed, key in the

appropriate option number.

PAGE (Teletext page selection) For selecting

Teletext pages on certain Bang & Olufsen TVs

(where pressing GO TO is normally required for

access). Key in the page number you want, or

press ▲or ▼

PC Select PC in order to use Beo4 to adjust the

sound from a Personal Computer connected to

your Bang & Olufsen BeoLink system.

PHONO (record player) For switching on a Bang &

Olufsen record player. Press GO to do so. While

PHONO is displayed, and the record is playing,

you may press ▲or ▼to step through the

music; and you may press STOP and GO to

pause and resume playback.

PICTURE For operating the various functions

related to the PICTURE button on other recent

Bang & Olufsen remote controls. In older video

systems, it may relate to functions such as

motorised stand, picture-in-picture, as well as

picture adjustment. V.SETUP must be added to

be able to access PICTURE.

P-IN-P (picture-in-picture) For operating the

picture-in-picture function on certain Bang &

Olufsen TVs. Press, for example, the TV button

to call up the source TV in the small picture.

Note: While P-IN-P is displayed, press the four

coloured buttons to move the small picture

from corner to corner on the screen.

RADIO Appears in the display when you press the

Beo4 RADIO button. Any operation you carry

out on the Beo4 will be directed to your Bang

& Olufsen Radio.

RANDOM (random play) For switching on the

random order playback function in recent Bang

& Olufsen CD players. With RANDOM in the

display, press GO to do so.

RECORD2 (recording A.TAPE2 or V.TAPE2) Should

be added when you connect a second video tape

recorder to your video system. Starts a recording

on a second Bang & Olufsen audio or video tape

recorder. Press GO twice to start recording.

REMOVE? Appears when you have accessed the

Beo4 setup mode. Enables you to remove extra

“buttons” from the Beo4 display. Access the

Beo4 setup mode and call up REMOVE?, press

GO and start to reveal the “buttons”. Press GO

to remove the “button” currently displayed.

REPEAT (repeated play) For switching on the

repeated playback function in recent Bang &

Olufsen CD players. With REPEAT in the display,

press GO to do so.

RESET For resetting picture or sound adjustments

to their preset levels. Press GO to do so.

RETURN (record return) For operating the record

return function in certain Bang & Olufsen tape

recorders. To return to where a recording

started, press GO.

REVEAL (Teletext reveal) For revealing concealed

Teletext information in Bang & Olufsen TVs.

Press GO to do so.

SAT (Satellite) Appears in the display when you

press the Beo4 SAT button. Any operation you

carry out on the Beo4 will operate your Bang &

Olufsen Satellite program numbers.

SELECT Is used for programming a sequence of

compact discs for playback on BeoSound 9000.

SETUP For setting up the LC 2 Light Control.

SHIFT For operating certain functions related set-

top box operation in a link room. Certain other

functions may also require that SHIFT is

displayed first.

SP.DEMO (speaker demo) For making a speaker

demonstration on the system in question. Press

GO to do so.

SOUND (mono/stereo sound/language) For

switching between the types of sound

(mono/stereo/language) currently available on

a Radio-, TV-, or Satellite programme; or for

switching between the sound tracks on a video

tape. Press GO repeatedly to do so.

SPEAKER (loudspeakers) For selecting the number

of loudspeakers you want – in a Bang &

Olufsen surround sound setup. Press 1 – 5 to do

so. While SPEAKER is displayed, pressing ▲,▼,

ss or tt adjusts the loudspeaker balance.

S.STORE (sound store) For storing sound

adjustment settings. S.STORE is only available if

V.SETUP or A.SETUP has been added.

STAND For turning certain Bang & Olufsen video

systems on their motorized stands. Press ss or

tt to do so; or key in a preset stand position.

STORE For storing TV programs/picture

adjustment settings (see V.SETUP) and

favourite Teletext pages (memory pages). For

storing Bang & Olufsen light setups (see LIGHT).

To do so, press GO, key in the appropriate

number, and then press GO again.

SUBCODE (Teletext subcode) For operating the

Teletext subpage function in certain Bang &

Olufsen TVs.

TEXT (Teletext) Appears in the display when you

press the Beo4 TEXT button. Any operation you

carry out on the Beo4 will operate the Teletext

function (if Teletext is available) on the TV

program you are currently watching.

TRACK For selecting individual CD tracks on

BeoSound 9000.

TRACKNG (tracking) For instant tracking

adjustment of the video tape you are watching.

TREBLE For sound adjustment of treble tone in

certain Bang & Olufsen systems. TREBLE is only

available if A.SETUP or V.SETUP has been

added. Press ▲or ▼to adjust as required. Refer

to S.STORE (sound store) if you wish to store

your adjustment.

TUNE (tuning in a station) For tuning in stations

on certain Bang & Olufsen TVs. TUNE is only

available if V.SETUP has been added.

TURN For turning the tape in certain Bang &

Olufsen audio tape recorders – to play the

other side. On certain Bang & Olufsen video

tape recorders TURN is also used for input

selection of Camcorder in record pause mode.

Press GO to do so.

TV Appears in the display when you press the

Beo4 TV button. Any operation you carry out

on the Beo4 will be directed to your Bang &

Olufsen TV.

UPDATE (Teletext update) For operating the

Teletext update function in Bang & Olufsen

TVs. Press GO to do so. Repeat the operation to

see the page when it has been updated.

VIDEO? For selecting a dedicated Video product

setup for Beo4. Product setups AVANT,

AVANTUS, AV9000, MX, BV1, AV5, BC1 and

NONE are available.

V.AUX (auxiliary video source) For switching on to

any extra video equipment connected to your

Bang & Olufsen video system. Press GO to do

so.

V.OPT (video option) For programming a system

setup for video products. Refer to OPTION? for

further information.

V.SETUP (video setup) Gives access to a list of

extra “buttons” that are required for the

setting up of certain Bang & Olufsen video

products:

TUNE Used for tuning in stations, refer to TUNE

for further information.

PICTURE Used for Picture adjustment, refer to

PICTURE for further information.

STORE For storing an adjustment or a preset

value, refer to STORE for further information.

CLEAR (clear program numbers) For clearing

program numbers, refer to CLEAR for further

information.

BASS Sound adjustment of bass tone, refer to

BASS for further information.

TREBLE Sound adjustment of treble tone, refer

to TREBLE for further information.

LOUDNSS (loudness) Sound adjustment –

switching the loudness function on or off, refer

to LOUDNSS for further information.

S.STORE (sound store) For storing sound

adjustments, refer to S.STORE for further

information.

V.TAPE (video tape recorder) Appears in the

display when you press the Beo4 V TAPE

button. Any operation you carry out on the

Beo4 will be directed to your Bang & Olufsen

video tape recorder.

V.TAPE2 (video tape recorder 2) For switching on

a second video tape recorder connected to your

Bang & Olufsen video system. Press GO to do

so.

Date purchased

Contact person

Dealer

Telephone

Address

Beo4 remote control serial number

Dear Customer,

Your needs as the user of our products are always

given careful consideration during the design and

development process, and we strive to make our

products easy and comfortable to operate.

We therefore hope that you will take time to

drop us a line, telling us about your experiences

with your Bang & Olufsen system. Anything which

you consider important – positive or negative –

may help us in our constant efforts to refine our

products.

Thank you!

Please write to:

Customer information dept. 7240

Bang & Olufsen a/s

DK-7600 Struer

Denmark

3500955 0998

Printed in Denmark by

Bogtrykkergården a-s, Struer

Page is loading ...

Bang & Olufsen BEO4 Owner's manual

Brand: Bang & Olufsen

Model: BEO4

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

Beo4 Series

Download PDF

report

Bang & Olufsen BEO4 Owner's manual

This manual is also suitable for

Bang & Olufsen BEO4 Owner's manual

Related papers

Other documents