Bang & Olufsen Beo4 Series Owner's manual

Category
LCD TVs
Type
Owner's manual

This manual is also suitable for

About Beo4 and this guide…
This guide describes the principles of
operation for the Beo4 remote control, and
explains how to set up the Beo4 to match your
particular Bang & Olufsen systems.
Specific Beo4 operating instructions are found
in the User’s guides for the Bang & Olufsen
products which are designed for operation
with the Beo4 remote control.
If you have a Bang & Olufsen product which
has been designed for operation with another
recent Bang & Olufsen remote control, you
will find that the buttons on the Beo4 and the
“buttons” in the Beo4 display enable you to
operate the basic, daily functions in such a
product as well.
Beo4 principles of operation
4 Using the Beo4 remote control
Beo4 buttons in detail
6 Daily and advanced operation with Beo4
buttons
Extra Beo4 “buttons”
8 Calling up extra “buttons” in the Beo4
display via the LIST button
Customising your Beo4
10 Set up or extend your Beo4
11 Add an extra “button”
12 Rearrange the order of extra Beo4
“buttons”
13 Remove an extra “button”
Taking care of your Beo4
14 Cleaning your Beo4
14 Changing the batteries
Beo4 Lexicon of extra “buttons”
16 Explanation of Beo4 extra “buttons”
3
CONTENTS
4
The Beo4 is a hand-held remote control which
gives easy access to remote operation of your
Bang & Olufsen audio and/or video system.
Daily operations are carried out by pressing a
single button on the Beo4, or by pressing a
few buttons in a logical and straightforward
sequence.
The display on Beo4 keeps you informed of
which source you are operating: TV, RADIO,
Video tape recorder (V TAPE), CD or DVD
player, the audio tape recorder (A TAPE), or
even the lights (LIGHT)…
But the Beo4 remote control incorporates
more functions than just the actual buttons:
Extra sources can be switched on, and
additional functions can be obtained via the
display. “Buttons” for these functions can be
called up on the Beo4 display via the LIST
button.
Whether you use the Beo4 buttons for daily
operation, or call up extra “buttons” for
functions or sources in the display, you will
find that Beo4 remote operation is easy…
Using your Beo4 remote control
456
TEXT 0MENU
123
LIST
STOP
GO
The Beo4 remote control – you will find all the
buttons you need for daily operation centred
in and around the star-shaped button,
conveniently placed for operation with your
thumb.
BEO4 PRINCIPLES OF
5
The Beo4 display tells you which source you
are operating. It is also used for calling up
extra “buttons” for different functions or
sources.
Source buttons and buttons for recording
Number keys; and buttons for Teletext and
on-screen menus
Control buttons within the star-shaped
button
Volume, stop and exit buttons; and LIST
button for calling up extra “buttons” in the
Beo4 display.
Beo4 remote control
OPERATION
TV LIGHT RADIO
SAT DVD CD
V TAPE RECORD A TAPE
789
456
TEXT 0MENU
123
LIST EXIT
STOP
GO
BEO4 BUTTONS IN DETAIL
6
Daily and advanced operation with Beo4 buttons
The buttons on the Beo4 remote control are
conveniently grouped for daily operation
TV LIGHT RADIO
SAT DVD CD
V TAPE RECORD A TAPE
789
V TAPE RECORD A TAPE
789
456
TEXT 0MENU
123
Source buttons… TV, SAT, V TAPE, RADIO,
DVD, CD, A TAPE, and LIGHT are used for
switching on your Bang & Olufsen audio and
video products, other audio/video
integrated systems and the Bang & Olufsen
light control.*
RECORD button… is situated close to the
source buttons to enable easy recording on
a video or audio tape recorder.
Number keys… 0 through to 9 are used
whenever you have to key in numbers, for
example to select an exact TV or radio
program number, to select Teletext pages or
to select specific tracks on a CD, DVD disc or
a audio or video tape.
TEXT and MENU buttons… gives access to
Teletext on your Bang & Olufsen TV and
calls up the on-screen menus for your
Bang & Olufsen video products.
*Note: Some externally connected products
may have to be switched on via the LIST
button and subsequent relevant buttons or
cues shown in the Beo4 display.
7
TEXT 0MENU
LIST EXIT
GO
LIST EXIT
STOP
Control buttons within the star-shaped
button…
and allow you to step through
program numbers or tracks. On some audio
systems, they act as On or Off buttons
respectively for a Random, Repeat or Edit
function.
ss and tt allow you to wind through an
audio or video tape or a CD on a single CD
player. On a multiple CD player the wind
buttons are used to change from CD to CD.
GO button… is used for accepting various
types of operations; and to resume playing
the source which is shown in the Beo4
display.
Coloured buttons… are for special operations.
It will be explained in the Users guide for
your Bang & Olufsen product when and how
to use the buttons.
Volume, stop and exit buttons; and LIST
button for calling up extra “buttons” in the
Beo4 display…
Volume button… and in the centre turns
the sound in the loudspeakers up or down.
Press the volume button right on the middle
to mute the speakers completely, press the
button again to bring the sound back.
STOP button… is used for various stop
functions, for example, to stop playback on
a source.
EXIT button… exits Beo4 display operation;
and removes on-screen menus.
LIST button… pressing it repeatedly displays
extra buttons for functions or sources in
the Beo4 display.
Standby button the red standby button
switches your Bang & Olufsen system off.
EXTRA BEO4 BUTTONS
8
Calling up extra “buttons” in the Beo4 display
The buttons on your Beo4 remote control give
access to direct remote control of a large
number of functions in your entire Bang &
Olufsen system.
However, the display combined with the LIST
button on the Beo4 enables you to operate
even more functions or sources. Each time you
press LIST on Beo4, a new button appears in
the display which represents an extra function
or source that you can operate via your Beo4
Whenever a source is displayed on the Beo4
(TV, RADIO, CD, …), you can call up extra
buttons in the display to operate that
particular source, e.g. STAND to turn the TV,
FORMAT to change the size and shape of the
picture on the screen, and so on.
You can also switch on extra products
connected to your Bang & Olufsen audio or
video system via the Beo4 display, e.g.
VTAPE2 an extra video tape recorder.
These extra buttons can be edited, though.
You can add new buttons from the Beo4
setup list if necessary, rearrange the manner in
which these chosen buttons appear on the
Beo4 display or even remove them from the
list of extra buttons that you access directly.
For further information of how to edit the
Beo4 list of extra buttons, please refer to
the chapter Customising your Beo4.
LIST
The Beo4 display acts as a status display and
tells you which source you are currently
operating. But each time you press the LIST
button, you will see a new “button” or cue in
the Beo4 display.
9
When calling up extra “buttons”…
You can either hold the LIST button down to
make the buttons appear successively in the
display; or press LIST repeatedly to step
through them one by one.
When you have found the button you want,
you must either press the GO button to switch
on (activate) the function, or start operating
the function directly using the Beo4 buttons.
When you have finished operating the extra
function, then press EXIT or a source button
e.g. TV to remove the button from the Beo4
display, and return to controlling the original
source e.g. TV.
Note: An extra button in the Beo4 display,
however, only gives access to operating a
function, if that function is offered by your
particular Bang & Olufsen product.,
Using the Beo4 LIST button in combination with
the display…
Press LIST repeatedly or continuously
until the button you want is
displayed
When you have found the “button”
you want…
Press GO to access the function or
switch on the extra source
Or…
Press the relevant buttons to start
operating the function, for example,
ss tt or ▲▼
Press EXIT to return to your original
source
Press a source button e.g. TV to
return to controlling TV
Please note…
Not all Bang & Olufsen products (for
example not all TVs) offer the same set of
functions. That is why the Beo4 is specially
set up to match your particular Bang &
Olufsen system(s).
LIST
GO
then
or
EXIT
TV
CUSTOMISING YOUR BEO4
10
Set up and extend your Beo4
The Beo4 remote control is set up to match
your Bang & Olufsen systems. In most cases,
the relevant extra Beo4 buttons shown in
the display are already available, however, you
can still customise your Beo4 to suit your
specific demands or products.
You can set the Beo4 up so that only the extra
buttons that you feel are relevant are
included. You may remove any "button" or
add a "button" yourself, if necessary. You can
also rearrange the order in which the extra
buttons appear when you press LIST.
To add, move or remove extra "buttons", you
must access the Beo4 setup function, and find
ADD? (for adding a button), MOVE? (for
rearranging the order of buttons), or
REMOVE? (for removing a button).
*Please note…
If you wish to find out what the various extra
Beo4 buttons or setup functions imply, then
turn to the Beo4 Lexicon at the back of this
guide for further information and
explanation.
LIST
The Beo4 setup function consists of a number
of different functions. The first three
“buttons” or functions refer to how you
customise Beo4, adding, moving or removing
individual extra “buttons” used in your daily
operation. The remaining setup functions
relate to the products your Beo4 operates*.
11
GO 3
Add an extra “button” to Beo4
You can add extra buttons to Beo4 which
can then be used on a daily basis. When you
add a button, you can chose to place your
new button somewhere in-between, on its
preset position or at the top*.
When the button you want is displayed,
then add the button and choose where you
want it. The next time you press LIST on Beo4,
the new button will appear in the display.
*Note: The button you add will only be
placed at the top of the list if you have already
added another button and placed it in a
specific position, or if you have used the move
facility in the Beo4 setup function.
To be able to add extra “buttons”…
Press and hold the standby button
down
Press LIST to get access to the special
Beo4 setup function
Now, let go of both buttons
ADD? appears in the display…
Press GO to call up the list of
buttons you want to add from
The first “button” appears in the
display, it flashes on and off…
Press LIST until the button you
want to add is displayed
Or, press any of the control buttons, ▲▼
or ss tt to move forwards or backwards in
the list of all extra buttons”…
Press GO to add and place it on its
preset position or as the first
buttonin the list of your extra
buttons
Or…
Press a number key e.g. 3 to insert
the added button on a specific
position in the list of your extra
buttons
When ADDED appears in the display, the button”
has been added and you then leave the Beo4
setup automatically…
LIST
GO
then
GO
then
then
LIST
then
3
>Customising your Beo4
12
To be able to move extra “buttons”…
Press and hold the standby button
down
Press LIST to get access to the Beo4
setup function
Now, let go of both buttons
ADD?appears in the display…
Press LIST until MOVE? is displayed
Press GO to call up the Beo4 list of
extra buttons
The first “button” appears in the
display…
Press LIST until the button you
want to move is displayed
Or, press any of the control buttons,
▲▼or ss tt to move forwards or
backwards in the list of your extra
buttons”…
Press GO to move and place it as the
first button in the list of your
extra buttons
Or
Press a number key e.g. 3 to insert
the button you move into a
specific position in the list of your
extra buttons
When MOVED appears in the display, the “button”
has been moved and you then leave the Beo4
setup automatically…
LIST
then
then
then
LIST
then
GO
3
Rearrange the order of extra Beo4 “buttons”
GO
GO 3
You can rearrange the list of extra buttons
that you yourself have added and the ones
that were already present when you press LIST.
When you add a button, you can chose
where you want your new button”– at the
top so that it always appears as the number
one extra button or place it somewhere in-
between.
Note: If you wish to move more than one
button in your Beo4 list of extra buttons,
e.g. FORMAT and STAND, then make sure that
you move FORMAT first and then STAND if you
want STAND to appear as your first extra
button when you press LIST.
LIST
13
Remove an extra Beo4 “button”
You can remove any of the extra buttons
that are currently available when you press
LIST.
The next time you operate your Bang &
Olufsen product, the button you removed
will no longer be available in the display.
However, removing an extra button does
not mean that it is actually deleted from Beo4.
You can always add the button again via
ADD? in the Beo4 setup function.
Note: Some of the extra buttons cannot be
removed. The buttons which appear when
you add V.SETUP or A.SETUP e.g. BASS, TREBLE
cannot be removed as they belong to this
main button. To remove them you must
remove V.SETUP or A.SETUP.
To be able to remove extra “buttons”…
Press and hold the standby button
down
Press LIST to get access to the special
Beo4 setup function
Now, let go of both buttons
ADD?appears in the display…
Press LIST until REMOVE? is displayed
The first “button” in the Beo4 list of
all your available extra “buttons”
appears in the display…
Press LIST until the button you
want to remove is displayed
Or, press any of the control buttons, ▲▼
or ss tt to move forwards or backwards in
the list of your extra buttons”…
Press GO to remove the button
you have chosen
When REMOVED appears in the display, the
“button” has been removed and you then leave
the Beo4 setup function automatically…
GO
then
LIST
then
LIST
then
LIST
then
TAKING CARE OF BEO4
14
Cleaning the Beo4…
Wipe the Beo4 remote control with a soft, lint-
free, wet cloth which is wrung firmly.
Changing the batteries…
When BATTERY appears in the Beo4 display, it
is time to change the batteries in the remote
control.
The Beo4 requires three batteries (placed
under the lid on the back). We recommend
that you use 1.5 volt (size AAA) Alkaline
batteries only.
Replace the batteries as shown on this page
When you have replaced the batteries, you
must wait for about 10 seconds until the
display reads TV. The Beo4 remote control is
then ready to operate again.
Note: We recommend that you keep a finger
on top of the batteries until the lid is replaced.
1
2
3
1
2
The three batteries in the Beo4 are placed
under the lid on the back.
15
BEO4 LEXICON
16
A
ADD? Appears as an option in the Beo4 setup
mode. Enables you to add extra buttons to
the Beo4 display. Access the Beo4 setup mode
and call up ADD?, press GO and start to reveal
the buttons you can add press GO to add
the button currently displayed as the first
extra button when you press LIST or press
e.g. 3 to place it as number 3 in the list of all
your extra buttons.
AUDIO? For selecting an Audio product setup for
Beo4. Product setups BS9000 and BASIC are
available.
AV Indicates that the audio/video function is
activated, transferring e.g. TV sound to the
speakers connected to an audio system or vice
versa. This only applies if your Video and Audio
system is interconnected.
AVANT Indicates the Beo4 Video product setup
dedicated to BeoVision Avant.
AVANTUS Indicates the Beo4 Video product setup
dedicated to the BeoVision Avant US version.
AV5 Indicates the Beo4 Video product setup
dedicated to BeoCenter AV5.
AV9000 Indicates the Beo4 Video product setup
dedicated to BeoSystem AV9000.
A.OPT (audio option) For programming a system
setup for audio systems. Please refer to
OPTION? for a further explanation
A.SETUP (audio setup) Gives access to a list of
extra buttons required for sound adjustment
of certain Bang & Olufsen audio systems,
A.SETUP must be added in order to be able to
reveal the following "buttons" for sound
adjustment:
BASS gives access to adjusting Bass levels for
an audio system.
TREBLE gives access to adjusting Treble levels
for an audio system.
LOUDNSS (loudness) Gives access to setting
Loudness to On or Off, please refer to
LOUDNSS for further information.
S.STORE (Sound Store) gives access to storing
sound adjustments, please see S.STORE for
further information.
A.TAPE (audio tape recorder) Appears in the
display when you press the Beo4 A TAPE
button. Any operation you carry out on the
Beo4 will be directed to your Bang & Olufsen
audio tape recorder.
A.TAPE2 (audio tape recorder 2) For switching on
a second audio tape recorder connected to
your Bang & Olufsen audio system.
A.AUX (audio auxiliary source) For switching on
any extra equipment connected to your Bang &
Olufsen audio system.
B
BASIC Indicates the Beo4 Audio product setup for
all Bang & Olufsen audio systems other than
BeoSound 9000
BASS For sound adjustment of bass levels in
certain Bang & Olufsen systems. In order to get
access to BASS you must add either A.SETUP or
V.SETUP as appropriate. If you wish to store
sound adjustments, refer to S.STORE (Sound
Store) for further information.
BATTERY Indicates that it is time to change the
batteries in the Beo4 remote control.
BC1 Indicates a dedicated Beo4 Video product
setup. For future use.
BV1 Indicates a dedicated Beo4 Video product
setup. For future use.
BS9000 Indicates the Beo4 Audio product setup
dedicated to BeoSound 9000.
C
CAMCORD (Camcorder) For selection of
CamCorder input on Bang & Olufsen video
systems.
CD (compact disc player) Appears in the display
when you press the Beo4 CD button. Any
operation you carry out on the Beo4 will be
directed to your Bang & Olufsen CD player.
CD2 (compact disc player 2) For switching on a
second CD player in certain Bang & Olufsen
audio systems.
CDV (compact disc video player) For switching on
to a compact disc video player connected to
your Bang & Olufsen video system.
OF EXTRA BUTTONS17
CLEAR For clearing program numbers on recent
Bang & Olufsen TV sets. In order to get access
to CLEAR, V.SETUP must be added first.
CLOCK Displays the time on certain Bang &
Olufsen products. Please refer to the
appropriate Users guide for the product in
question for further information.
CONFIG? Enables you to programme a dedicated
product setup for Beo4. You can select product
setups for video and audio products.
COUNTER (counter position) Allows you to find a
specific counter position on a video tape. Press
LIST repeatedly to reveal COUNTER and then
just key in the appropriate counter position
using the number keys.
D
DOORCAM (Door camera) For special Bang &
Olufsen applications.
DVD (digital versatile disc) Appears in the display
when you press the Beo4 DVD button. Any
operation you carry out on Beo4 will be
directed to your DVD player.
E
EDIT Used for playback of a preprogrammed
sequence of CD tracks on BeoSound 9000.
F
FORMAT (picture format) For optimising the
picture format on a Bang & Olufsen wide-
screen video system. Please refer to the
relevant Users guide for further information.
I
INDEX (Teletext index page) Calls up the Teletext
index page (p.100). Add INDEX to the Beo4 list
of functions. Access Teletext by pressing TEXT
and press LIST repeatedly to reveal INDEX and
press GO to call up the page.
L
LAMP (lamp light control) For switching on a
particular lamp in your light setup requires
the installation of a Bang & Olufsen light
control unit. Press LIST to reveal LAMP, add the
button if it is not already available, then key
in the appropriate number for a lamp (1 9).
LARGE (Teletext: Large) Used on certain Bang &
Olufsen TVs for enlarging the Teletext page
you are watching. Access Teletext, then
press LIST repeatedly to display LARGE and
press GO to enlarge part of the page. Press
GO to enlarge the second half of the page
and press GO to return the page to normal
Teletext page size.
LIGHT (light control) Appears in the display when
you press the Beo4 LIGHT button. Any operation
you carry out on the Beo4 will be directed
towards your Bang & Olufsen light control(s).
LINK Must be used where the use of a LINK
button is normally specified. LINK must be
added to your Beo4 to achieve the following:
1. If it is desired that a decoder in the main
room can be accessed from a video link room,
e.g. display LINK in the Beo4 display and then
press TV to do so.
2. If the same source is available in both link
and main room, e.g. if access is desired in the
link room to a Video tape recorder (VTR) in the
main room instead of the VTR present in the
link room, display LINK in the Beo4 display and
then press V TAPE to do so.
3. If a link room product, e.g. BeoLab 3500, is
placed in the same room as a main room
product, e.g. Avant and Ouverture. (Option 4)
4. For compatibility setups, where e.g. an X-tra
speaker kit is placed in a link room together
with a TV, or, where e.g. an X-tra TV kit is
placed in a link room together with an old
Bang & Olufsen TV, e.g. a LX2802 TV.
To activate any link setups, display LINK on
Beo4 and then press the appropriate source
button (TV, RADIO, CD, A TAPE, V TAPE).
L-PHONO (link PHONO) For selecting LINK and
then PHONO.
L-V.TP2 (link video tape recorder 2) For selecting
LINK and then V.TAPE2.
LINK-AV (link audio/video) Used to obtain stereo
sound from your main Bang & Olufsen video
system in a link room with a secondary video
source, usually TV. The function is useful when
18
a TV decoder is connected to the main video
system. Add it to the Beo4 list of functions,
press LIST to reveal LINK-AV and then press TV
to do so.
L.OPT (link option) For programming a system
setup for link room products. Use L.OPT for
programming a link option. Refer to OPTION?
for further information.
LOUDNSS (loudness) For switching the loudness
function on/off in certain Bang & Olufsen
systems. LOUDNSS is only available if A.SETUP
or V.SETUP has been added. The loudness
function compensates for the human ears
diminished sensitivity to high and low bass and
treble levels when listening to low volume
levels. Press LIST to reveal LOUDNSS and then
press GO repeatedly to set loudness to on or
off. If you wish to store your adjustment, refer
to S.STORE (Sound Store) for further
information.
M
MIX (Teletext: Mix) Used on certain Bang &
Olufsen TVs to superimpose the Teletext page
on the TV picture. Access Teletext, press LIST
repeatedly to reveal MIX and then press GO.
MOVE? Appears as an option in the Beo4 setup
mode, Enables you to rearrange the order in
which the extra buttons in the Beo4 display
appear. Access the Beo4 setup mode and call
up MOVE?, press GO and start to reveal the
buttons you can move press GO to move
the button currently displayed in as the first
extra button when you press LIST or press
e.g. 3 to place it as number 3 in the list of all
your extra buttons.
MX Indicates the Beo4 Video product setup
dedicated to BeoVision MX. The MX product
setup should also be used for older versions of
BeoVision MX TVs and other older Bang &
Olufsen video systems. In order to tune and
preset such systems, you must add V.SETUP.
N
NONE Indicates the Beo4 Video product setup
NONE. Used if you want to programme a Beo4
with an Audio product setup only without
including any video List functions.
O
OPTION? (option programming) Appears when
you access the Beo4 setup mode (Press Standby
and LIST, then press LIST repeatedly). Enables
you to preprogramme a Bang & Olufsen system
setup. Press GO, then LIST to display the type of
option preprogramming you want to make:
V.OPT (video option)
A.OPT (audio option)
L.OPT (link option)
When the right option is displayed, key in the
appropriate option number.
P
PAGE (Teletext page selection) For selecting
Teletext pages on certain Bang & Olufsen TVs
(where pressing GO TO is normally required for
access). Key in the page number you want, or
press or
PC Select PC in order to use Beo4 to adjust the
sound from a Personal Computer connected to
your Bang & Olufsen BeoLink system.
PHONO (record player) For switching on a Bang &
Olufsen record player. Press GO to do so. While
PHONO is displayed, and the record is playing,
you may press or to step through the
music; and you may press STOP and GO to
pause and resume playback.
PICTURE For operating the various functions
related to the PICTURE button on other recent
Bang & Olufsen remote controls. In older video
systems, it may relate to functions such as
motorised stand, picture-in-picture, as well as
picture adjustment. V.SETUP must be added to
be able to access PICTURE.
P-IN-P (picture-in-picture) For operating the
picture-in-picture function on certain Bang &
Olufsen TVs. Press, for example, the TV button
to call up the source TV in the small picture.
Note: While P-IN-P is displayed, press the four
coloured buttons to move the small picture
from corner to corner on the screen.
19
R
RADIO Appears in the display when you press the
Beo4 RADIO button. Any operation you carry
out on the Beo4 will be directed to your Bang
& Olufsen Radio.
RANDOM (random play) For switching on the
random order playback function in recent Bang
& Olufsen CD players. With RANDOM in the
display, press GO to do so.
RECORD2 (recording A.TAPE2 or V.TAPE2) Should
be added when you connect a second video tape
recorder to your video system. Starts a recording
on a second Bang & Olufsen audio or video tape
recorder. Press GO twice to start recording.
REMOVE? Appears when you have accessed the
Beo4 setup mode. Enables you to remove extra
buttons from the Beo4 display. Access the
Beo4 setup mode and call up REMOVE?, press
GO and start to reveal the buttons. Press GO
to remove the button currently displayed.
REPEAT (repeated play) For switching on the
repeated playback function in recent Bang &
Olufsen CD players. With REPEAT in the display,
press GO to do so.
RESET For resetting picture or sound adjustments
to their preset levels. Press GO to do so.
RETURN (record return) For operating the record
return function in certain Bang & Olufsen tape
recorders. To return to where a recording
started, press GO.
REVEAL (Teletext reveal) For revealing concealed
Teletext information in Bang & Olufsen TVs.
Press GO to do so.
S
SAT (Satellite) Appears in the display when you
press the Beo4 SAT button. Any operation you
carry out on the Beo4 will operate your Bang &
Olufsen Satellite program numbers.
SELECT Is used for programming a sequence of
compact discs for playback on BeoSound 9000.
SETUP For setting up the LC 2 Light Control.
SHIFT For operating certain functions related set-
top box operation in a link room. Certain other
functions may also require that SHIFT is
displayed first.
SP.DEMO (speaker demo) For making a speaker
demonstration on the system in question. Press
GO to do so.
SOUND (mono/stereo sound/language) For
switching between the types of sound
(mono/stereo/language) currently available on
a Radio-, TV-, or Satellite programme; or for
switching between the sound tracks on a video
tape. Press GO repeatedly to do so.
SPEAKER (loudspeakers) For selecting the number
of loudspeakers you want in a Bang &
Olufsen surround sound setup. Press 1 5 to do
so. While SPEAKER is displayed, pressing ,,
ss or tt adjusts the loudspeaker balance.
S.STORE (sound store) For storing sound
adjustment settings. S.STORE is only available if
V.SETUP or A.SETUP has been added.
STAND For turning certain Bang & Olufsen video
systems on their motorized stands. Press ss or
tt to do so; or key in a preset stand position.
STORE For storing TV programs/picture
adjustment settings (see V.SETUP) and
favourite Teletext pages (memory pages). For
storing Bang & Olufsen light setups (see LIGHT).
To do so, press GO, key in the appropriate
number, and then press GO again.
SUBCODE (Teletext subcode) For operating the
Teletext subpage function in certain Bang &
Olufsen TVs.
T
TEXT (Teletext) Appears in the display when you
press the Beo4 TEXT button. Any operation you
carry out on the Beo4 will operate the Teletext
function (if Teletext is available) on the TV
program you are currently watching.
TRACK For selecting individual CD tracks on
BeoSound 9000.
TRACKNG (tracking) For instant tracking
adjustment of the video tape you are watching.
TREBLE For sound adjustment of treble tone in
certain Bang & Olufsen systems. TREBLE is only
available if A.SETUP or V.SETUP has been
added. Press or to adjust as required. Refer
to S.STORE (sound store) if you wish to store
your adjustment.
20
TUNE (tuning in a station) For tuning in stations
on certain Bang & Olufsen TVs. TUNE is only
available if V.SETUP has been added.
TURN For turning the tape in certain Bang &
Olufsen audio tape recorders to play the
other side. On certain Bang & Olufsen video
tape recorders TURN is also used for input
selection of Camcorder in record pause mode.
Press GO to do so.
TV Appears in the display when you press the
Beo4 TV button. Any operation you carry out
on the Beo4 will be directed to your Bang &
Olufsen TV.
U
UPDATE (Teletext update) For operating the
Teletext update function in Bang & Olufsen
TVs. Press GO to do so. Repeat the operation to
see the page when it has been updated.
V
VIDEO? For selecting a dedicated Video product
setup for Beo4. Product setups AVANT,
AVANTUS, AV9000, MX, BV1, AV5, BC1 and
NONE are available.
V.AUX (auxiliary video source) For switching on to
any extra video equipment connected to your
Bang & Olufsen video system. Press GO to do
so.
V.OPT (video option) For programming a system
setup for video products. Refer to OPTION? for
further information.
V.SETUP (video setup) Gives access to a list of
extra buttons that are required for the
setting up of certain Bang & Olufsen video
products:
TUNE Used for tuning in stations, refer to TUNE
for further information.
PICTURE Used for Picture adjustment, refer to
PICTURE for further information.
STORE For storing an adjustment or a preset
value, refer to STORE for further information.
CLEAR (clear program numbers) For clearing
program numbers, refer to CLEAR for further
information.
BASS Sound adjustment of bass tone, refer to
BASS for further information.
TREBLE Sound adjustment of treble tone, refer
to TREBLE for further information.
LOUDNSS (loudness) Sound adjustment
switching the loudness function on or off, refer
to LOUDNSS for further information.
S.STORE (sound store) For storing sound
adjustments, refer to S.STORE for further
information.
V.TAPE (video tape recorder) Appears in the
display when you press the Beo4 V TAPE
button. Any operation you carry out on the
Beo4 will be directed to your Bang & Olufsen
video tape recorder.
V.TAPE2 (video tape recorder 2) For switching on
a second video tape recorder connected to your
Bang & Olufsen video system. Press GO to do
so.
21
Date purchased
Contact person
Dealer
Telephone
Address
Beo4 remote control serial number
Dear Customer,
Your needs as the user of our products are always
given careful consideration during the design and
development process, and we strive to make our
products easy and comfortable to operate.
We therefore hope that you will take time to
drop us a line, telling us about your experiences
with your Bang & Olufsen system. Anything which
you consider important positive or negative
may help us in our constant efforts to refine our
products.
Thank you!
Please write to:
Customer information dept. 7240
Bang & Olufsen a/s
DK-7600 Struer
Denmark
3500955 0998
Printed in Denmark by
Bogtrykkergården a-s, Struer
22
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Bang & Olufsen Beo4 Series Owner's manual

Category
LCD TVs
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI