Hitachi axm525dbe User manual

  • Hello! I am an AI chatbot trained to assist you with the Hitachi axm525dbe User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GB
Instruction Manual
AXM525DBE
Micro Hi-Fi System with DAB+ and
Bluetooth
®
technology
Contents
Some Dos and Don’ts on the Safe Use of Equipment ........................................................4
Battery Safety Guidelines ....................................................................................................5
Safety Warnings ....................................................................................................................6
Unpacking .............................................................................................................................8
Product Overview .................................................................................................................9
Front View .......................................................................................................................................................9
Rear View ...................................................................................................................................................... 10
Remote Control ...................................................................................................................11
Remove the Plastic Strip from the Remote Control .........................................................12
Battery Replacement for the Remote Control ..................................................................12
Remote Control Operation Range .....................................................................................13
Connections ........................................................................................................................13
Speaker Connections ............................................................................................................................... 13
Using the AUX Connection .................................................................................................................... 14
Connecting to the Mains Supply ......................................................................................................... 14
Using Earphones........................................................................................................................................ 15
Connecting the Aerial .............................................................................................................................. 15
Charging from the USB CHARGING Port ........................................................................................... 15
General Operation ..............................................................................................................16
Powering ON/OFF ..................................................................................................................................... 16
Selecting Modes ........................................................................................................................................ 16
Adjusting the Volume .............................................................................................................................. 16
Auto Setting the Clock ............................................................................................................................ 16
Manually Setting the Time ..................................................................................................................... 16
Settings the Daily Timer .......................................................................................................................... 17
To Turn the Daily Timer On/O ............................................................................................................. 17
Setting the Sleep Timer ........................................................................................................................... 17
EQ Control .................................................................................................................................................... 18
Software Version ........................................................................................................................................ 18
System Reset ............................................................................................................................................... 18
DAB Operation ....................................................................................................................19
Full Scan ........................................................................................................................................................ 19
Manual Tuning ............................................................................................................................................ 19
Secondary Services ................................................................................................................................... 19
DRC (Dynamic Range Compression) .................................................................................................. 20
Pruning radio stations ............................................................................................................................. 20
Preset Stations ............................................................................................................................................ 20
Recalling a Stored Station ...................................................................................................................... 20
DAB+/DAB Display Modes ..................................................................................................................... 21
FM Operation ......................................................................................................................22
Switching from DAB to FM Mode ........................................................................................................ 22
Auto Scan ..................................................................................................................................................... 22
Manual Scan ................................................................................................................................................ 22
Scan Setting ................................................................................................................................................ 22
Audio Mode ................................................................................................................................................. 23
Preset Stations ............................................................................................................................................ 23
Recalling a Stored Station ...................................................................................................................... 23
FM Display Modes ..................................................................................................................................... 24
Compatible Disc Types .......................................................................................................25
CD Operation ......................................................................................................................25
Playback ........................................................................................................................................................ 25
To Pause Playback ..................................................................................................................................... 25
To Stop Playback ........................................................................................................................................ 25
Skipping to Another Track ..................................................................................................................... 25
Repeat Playback ......................................................................................................................................... 26
Random Playback ...................................................................................................................................... 26
Programme Setting .................................................................................................................................. 26
Programme Cancel ................................................................................................................................... 26
Intro Playback ............................................................................................................................................. 26
Bluetooth® Operation ........................................................................................................27
AUX Operation ....................................................................................................................28
Maintenance .......................................................................................................................29
Cleaning the Unit ...................................................................................................................................... 29
Handling Discs ............................................................................................................................................ 29
Cleaning Discs ............................................................................................................................................ 29
Storing Discs ............................................................................................................................................... 29
Hints and Tips .....................................................................................................................30
Specications ......................................................................................................................31
SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety
standards but, like any electrical equipment, care must be taken if you are to obtain the
best results and safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads
and inter-connections between the pieces of equipment) are properly made and
in accordance with the manufacturer’s instructions. Switch o and withdraw the
mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or
safety of your equipment.
DO be careful with glass panels or doors on the equipment.
DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or
subjected to excessive wear and tear or heat.
DON’T remove any xed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as
newspapers, tablecloths, curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects
lled with liquids, such as vases.
DON’T place hot objects or naked ame sources such as lighted candles or nightlights
on, or close, to equipment. High temperatures can melt plastic and lead to res.
DON’T use makeshift stands and NEVER x legs with wooden screws. To ensure complete
safety always t the manufacturer’s approved stand or legs with the xings
provided and according to the instructions.
DON’T use equipment such as personal stereos or radios that will distract you from the
requirements of trac safety.
DON’T listen to headphones at high volume, as such use can permanently damage your
hearing.
DON’T leave equipment switched on when it is unattended unless it is specically stated
that is designed for unattended operation or has a stand-by mode. Switch o
using the ON/OFF switch on the equipment or at the mains socket, and make
sure that your family knows how to do this. Special arrangements may need to be
made for inrm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working
normally, or if it is damaged in any way – switch o, remove the mains plug from
the mains socket and consult your dealer.
ABOVE ALL
NEVER let anyone especially children push anything into holes, slots or any other
opening in the equipment – this could result in a fatal electric shock.
NEVER guess or take chances with electrical equipment of any kind. It is better to
be safe than sorry!
Used correctly, domestic batteries are a safe and dependable source
of portable power. Problems can occur if they are misused or abused
– resulting in leakage or, in extreme cases, re or explosion.
Here are some simple guidelines to safe battery use designed to
eliminate any such problems.
Take care to t your batteries
correctly, observing the plus and
minus marks on the battery and
appliance. Incorrect tting can cause
leakage or, in extreme cases, re or
even an explosion.
Replace the whole set of batteries at
one time, taking care not to mix old
and new batteries or batteries of
dierent types, since this can result in
leakage or, in extreme cases, re or
even an explosion.
Remove dead batteries from
equipment and all batteries from
equipment you know you are not
going to use for a long time.
Otherwise the batteries may leak and
cause damage.
Store unused batteries in their
packaging and away from metal
objects which may cause a
short-circuit resulting in leakage or, in
extreme cases, re or even an
explosion.
Never dispose of batteries in re as
this can cause them to explode.
Please recycle dead batteries; do not
put with the normal household
waste.
Supervise children if they are
replacing batteries themselves in
order to ensure these guidelines are
followed.
Never attempt to recharge ordinary
batteries, either in a charger or by
applying heat to them. They may
leak, cause re or even explode.
There are special rechargeable
batteries which are clearly marked as
such.
Remember that small button cell
batteries such as used in some
hearing aids, toys, games and other
appliances, are easily swallowed by
young children and this can be
dangerous.
Make sure battery compartments are
secure.
Keep loose button cells away from
young children.
Seek medical advice if you believe a
cell has been swallowed.
4
Battery Safety Guidelines
Used correctly, domestic batteries are a safe and dependable source
of portable power. Problems can occur if they are misused or abused
– resulting in leakage or, in extreme cases, re or explosion.
Here are some simple guidelines to safe battery use designed to
eliminate any such problems.
Take care to t your batteries
correctly, observing the plus and
minus marks on the battery and
appliance. Incorrect tting can cause
leakage or, in extreme cases, re or
even an explosion.
Replace the whole set of batteries at
one time, taking care not to mix old
and new batteries or batteries of
dierent types, since this can result in
leakage or, in extreme cases, re or
even an explosion.
Remove dead batteries from
equipment and all batteries from
equipment you know you are not
going to use for a long time.
Otherwise the batteries may leak and
cause damage.
Store unused batteries in their
packaging and away from metal
objects which may cause a
short-circuit resulting in leakage or, in
extreme cases, re or even an
explosion.
Never dispose of batteries in re as
this can cause them to explode.
Please recycle dead batteries; do not
put with the normal household
waste.
Supervise children if they are
replacing batteries themselves in
order to ensure these guidelines are
followed.
Never attempt to recharge ordinary
batteries, either in a charger or by
applying heat to them. They may
leak, cause re or even explode.
There are special rechargeable
batteries which are clearly marked as
such.
Remember that small button cell
batteries such as used in some
hearing aids, toys, games and other
appliances, are easily swallowed by
young children and this can be
dangerous.
Make sure battery compartments are
secure.
Keep loose button cells away from
young children.
Seek medical advice if you believe a
cell has been swallowed.
• Read all the instructions carefully before
using the unit and keep them for future
reference.
• Retain the manual. If you pass the unit
onto a third party make sure to include this
manual.
• Check that the voltage marked on the
rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
unplug from the mains socket and consult
your dealer.
Location of Unit
• The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the
unit and should be easily accessible.
• This unit is designed for indoor use only.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas/
electric res.
• Avoid exposure to direct sunlight and other
sources of heat.
Naked Flames
• Never place any type of candle or naked
ame on the top of or near the unit.
Moisture
• To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing. No
objects lled with liquids, such as vases,
should be placed on the unit.
• If you spill any liquid into the unit, it can
cause serious damage. Switch it o at the
mains immediately. Withdraw the mains
plug and consult your dealer.
Ventilation
• To prevent the risk of electric shock or
re hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
• Do not install or place this unit in a
bookcase, built-in cabinet or in another
conned space. Ensure the unit is well
ventilated.
Safety
• Always disconnect the unit from the mains
supply before connecting/ disconnecting
other devices or moving the unit.
• Unplug the unit from the mains socket
before a lightning storm.
• In the interests of safety and to avoid
unnecessary energy consumption,
never leave the unit switched on while
unattended for long periods of time, e.g.
overnight, while on holiday or while out of
the house. Switch it o and disconnect the
mains plug from the mains socket.
Mains Cable
• Make sure the unit or the unit stand is not
resting on top of the mains cable, as the
weight of the unit may damage the cable
and create a safety hazard.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
aect the operating performance of the
unit, and cause distorted sound.
Batteries
• Batteries used in the remote control for this
unit are easily swallowed by young children
and this is dangerous.
• Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the remote control.
Seek medical advice if you believe a cell has
been swallowed.
• Please dispose of batteries correctly by
following the guidance in this manual.
• Do not expose the battery to direct sunlight
or sources of excessive heat.
Safety Warnings
6
Supervision
• Children should be supervised to ensure
that they do not play with the unit and the
remote control.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the units enclosure that
may be of sucient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the manual
accompanying the unit.
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
Maintenance
• Ensure the unit is fully unplugged from the
power supply before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
7
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Thank you for purchasing your new HITACHI Micro HI-FI System.
We recommend that you spend some time reading this instruction manual
so that you fully understand all the operational features it oers. You will
also nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
The Main Unit Speaker x 2 Remote Control
INFO
STANDBY
MODE
CLOCK RANDOM
MONO/
STEREO
PRESET
TIMER
EQ INTRO SLEEP
+
MUTE VOLUME
REPEAT PRESET
MEM
MENU
ENTER
PAIR
SCAN
SKIP/TUNE SEARCH SCANENTER/PAIR
VOLUME
USB
CHARGING
MENU/INFO
STANDBY
MODE
Quick Start Guide
Quick Start GuideInstruction ManualAerial
Instruction
Manual
GB
8
SKIP/TUNE SEARCH SCANENTER/PAIR
VOLUME
USB
CHARGING
MENU/INFO
STANDBY
MODE
5
13 14
6
12
11
10
9
2
8
1
7
Product Overview
Front View
1. LED Indicator
Light up red in STANDBY mode.
2. STANDBY Button
Switch the unit between the ON and
STANDBY modes.
3. SKIP/TUNE SEARCH Button
• Skip forwards to the next track.
• Allow fast forwarding of the current
track.
• Search for a radio station going
forwards through accessible radio
frequencies.
4. SKIP/TUNE SEARCH Button
• Skip backwards to the beginning of
the track or to the previous track.
• Allow fast reversing of the current
track.
• Search for a radio station going
backwards through accessible radio
frequencies.
5. MENU/INFO Button
• Press to show the current radio
selection information.
• Press and hold to show the DAB/FM
menu.
6. VOLUME +/– Dial
Increase or decrease the volume.
7. OPEN Button
Open CD compartment.
8. Remote Control Sensor
Receive signal from the remote control.
9. Display
10. /ENTER/PAIR Button
• Stop playback.
• Conrm the selection on a menu
screen.
11. /SCAN Button
• Play/pause/resume playback.
• Auto-scan in DAB/FM mode.
12. MODE Button
Switch between DAB, FM, CD, AUX and
Bluetooth mode.
13. Earphones Socket
14. USB CHARGING Port
For charging external devices only.
3
4
GB
9
ANT
AUX IN
AC ~
R L
Rear View
1
2
3
4
1. Aerial Socket
2. AUX IN Socket
Connects to an external audio device.
3. SPEAKER (L/R) Sockets
4. Mains Cable
GB
10
1. STANDBY Button
Switch the unit between the ON and
STANDBY modes.
2. INFO Button
• Display soundtrack playback
information.
• Display current radio selection
information.
3. REPEAT Button
Repeat a CD track or a music le.
4. Button
• Skip backwards to the beginning of
the track or to the previous track.
• Allow fast reversing of the current
track.
• Search for a radio station going
backwards through accessible radio
frequencies.
5. ENTER Button
Conrm the selection on a menu
screen.
6. MONO/STEREO Button
Switch between mono or stereo in FM
mode.
7. PRESET Buttons
Select a preset station.
8. CLOCK Button
Set up the clock.
9. EQ Button
Select the EQ (Equaliser) mode.
10. MUTE Button
Silence the unit or restore the sound.
11. MODE Button
Switch between DAB, FM, CD, AUX and
Bluetooth modes.
12. /SCAN Button
• Play/pause/resume playback.
• Auto-scan in DAB/FM mode.
13. PRESET/MEM Button
Preset a radio station.
14. Button
• Skip forwards to the next track.
Remote Control
INFO
STANDBY
MODE
CLOCK RANDOM
MONO/
STEREO
PRESET
TIMER
EQ INTRO SLEEP
+
MUTE VOLUME
REPEAT PRESET
MEM
MENU
ENTER
PAIR
SCAN
4
6
7
8
9
10
5
1
2
3
14
17
19
21
18
20
11
12
15
13
16
• Allow fast forwarding of the current
track.
• Search for a radio station going
forwards through accessible radio
frequencies.
15. /PAIR Button
• Stop playback.
• Access Bluetooth function to pair
with Bluetooth device.
16. MENU Button
Press to show the DAB/FM menu.
17. TIMER Button
Setup an alarm timer.
18. RANDOM Button
Random playback of CD tracks or music
les.
19. SLEEP Button
Select a sleep timer.
20. INTRO Button
Play soundtrack for 10sec.
21. VOLUME +/– Buttons
Increase or decrease the volume.
GB
11
Remove the Plastic Strip from the Remote Control
Remove the plastic strip from the battery if the battery is
being used for the rst time. It is located at the bottom rear
of the remote control.
2. Pull out the battery holder and remove the old
battery.
3. Replace with a new battery.
4. Insert the battery holder back into the remote
control.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re,
personal injury or damage to property.
• Install the battery correctly in the battery compartment. Normally the batterys positive polarity (+) will
face up.
• Use only the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with local regulations.
• Small button cell batteries such as the one used in the remote control are easily swallowed by young
children and this is dangerous. Keep loose button cells away from young children and make sure that
the battery is secure in the remote control. Seek medical advice if you believe a battery cell has been
swallowed.
Battery Replacement for the Remote Control
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in the
direction of the arrow.
GB
12
Remote Control Operation Range
• The remote control sensor on the front unit is
sensitive to the remote control’s commands up
to a maximum of 4 metres away and within a
maximum of 60° arc.
• Please note that the operating distance may
vary depending on the brightness of the room.
SKIP/TUNE SEARCH SCANENTER/PAIR
VOLUME
USB
CHARGING
MENU/INFO
STANDBY
MODE
30° 30°
Max. 4 m
INFO
STANDBY
MODE
CLOCK RANDOM
MONO/
STEREO
PRESET
TIMER
EQ INTRO SLEEP
+
MUTE VOLUME
REPEAT PRESET
MEM
MENU
ENTER
PAIR
SCAN
Handling the Remote Control
• Take care of your ngernails when you slide and pull the battery release tab.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and/or property damage, and/or re.
• When the battery is exhausted, the remote control will not function.
Connections
Speaker Connections
Connect the speaker cables at the back of the speakers to the SPEAKER (L/R) Sockets at the
rear of the unit.
ANT
AUX IN
AC ~
R L
R L
GB
13
ANT
AUX IN
AC ~
R L
ANT
AUX IN
AC ~
R L
Using the AUX Connection
Use a 3.5mm to RCA stereo audio cable to connect the audio device’s audio output sockets
to the unit’s AUX IN socket.
3.5mm to RCA
stereo audio cable
(not included)
3.5mm to 3.5mm
stereo audio cable
(not included)
Rear of the Unit
Mobile Device
Use a 3.5mm to 3.5mm stereo audio cable to connect the mobile device’s headphone
socket to the unit’s AUX IN socket.
AUDIO OUT
R
Red
White
L
Audio device Rear side of the unit
Connecting to the Mains Supply
• This unit is designed to operate with an AC power supply.
• Connecting the unit to any other power source may cause damage to the unit. Unwind
the mains cable to its full length. Connect the mains plug to a mains socket. Make sure
the mains plug is fully inserted into the mains socket. The unit is now connected and
ready to use.
• To switch the unit o completely, unplug the mains plug from the mains socket.
Ensure all connections are connected before connecting to the mains power socket.
ANT
AUX IN
AC ~
R L
To the mains
socket
GB
14
Long-term exposure to loud music may cause hearing damage.
It is best to avoid extreme volume when using earphones,
especially for extended periods.
SKIP/TUNE SEARCH SCANENTER/PAIR
VOLUME
USB
CHARGING
MENU/INFO
STANDBY
MODE
Using Earphones
Turn down the volume before connecting the earphones.
Slowly raise the volume with the earphones on until
you reach your desired volume. When earphones are
connected, the speakers automatically mutes.
Charging from the USB CHARGING Port
The USB CHARGING port is designed only for charging mobile devices (e.g. MP3 player,
mobile phone, etc). It supplies 5V DC at a charging current of up to 500mA (0.5A).
Use a USB cable (not included) to connect mobile device to the USB CHARGING port of the
unit and the mobile device will start charging.
SKIP/TUNE SEARCH SCANENTER/PAIR
VOLUME
USB
CHARGING
MENU/INFO
STANDBY
MODE
Connecting the Aerial
Connect the aerial to the AERIAL socket. Extend the aerial, to
receive the best FM reception.
ANT
AUX IN
AC ~
R L
ONLY use the USB CHARGING port to charge small mobile devices. NEVER use
this port for any other purpose.
GB
15
General Operation
Powering ON/OFF
When you rst connect the unit to the mains socket, the unit will be in STANDBY mode.
• Press on the unit or the remote control to switch the unit to ON mode.
• Press to switch the unit back to STANDBY mode. The Power LED indicator will light
up red.
• Disconnect the mains plug from the mains socket if you want to switch the unit o
completely.
• When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
• Please turn the unit o completely to save energy when not in use.
Selecting Modes
Press MODE repeatedly to switch between DAB, FM, CD, AUX and Bluetooth modes.
Adjusting the Volume
• Turn the VOLUME +/– dial on the unit or press VOLUME +/– on the remote control to
adjust the volume.
• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again
or press VOLUME +/– on the remote control or turn VOLUME +/– to resume normal
listening.
Auto Setting the Clock
The clock can be updated automatically if you can receive a DAB signal in your location.
In order to synchronise to the current local time you must leave it on the DAB station for a
short period of time.
Manually Setting the Time
1. During Standby mode, press CLOCK on the unit. The hour digits ash on the display.
2. Press to adjust the hour digits, and then press CLOCK to conrm. The minute
digits will ash on the display.
3. Press to adjust the minute digits, and then press CLOCK to conrm.
4. The time is now set.
If you cannot received any DAB signal, you can manually set the time. Once DAB signal is received,
the time will be automatically updated.
GB
16
Settings the Daily Timer
In standby mode,
1. Press and hold TIMER on the remote control until the
display shows “On Timer, and the hour digits ash.
2. Press to adjust the hour digits, and then press
TIMER to conrm. The minute digits will ash on the
display.
3. Press to adjust the minute digits, and then press
TIMER to conrm.
4. When On Timer Clock set, the display will show “O Timer”
and the hour digits will ash.
5. Press to adjust the hour digits, and then press
TIMER to conrm. The minute digits will ash on the
display.
6. Press on the remote control to adjust the minute
digits, and then press TIMER to conrm.
7. Finally press to select DAB, FM or DISC mode, then
press TIMER to conrm. The display will show VOL#” and
ash. Press to adjust the volume, and then press
TIMER to conrm.
8. The Timer setting is now complete.
To Turn the Daily Timer On/O
Once the timer is set, press TIMER on the remote control to select Timer On mode. The
display will show Timer On“ and then the icon to indicate the timer is on. Press TIMER
on the remote control again to select Timer O mode. The display will show Timer O
and then the icon will disappear from the display to indicate the time is o.
Setting the Sleep Timer
Use the sleep timer to turn the system o after a certain number of minutes in play mode.
By setting the sleep timer, you can fall asleep to music and know that your system will turn
o by itself rather than play all night.
1. To set the sleep timer press SLEEP on the remote control repeatedly to view the
dierent timer settings. The number of minutes shown will display in this sequence:
SLEEP 90 SLEEP 80
SLEEP OFF SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 40
SLEEP 70 SLEEP 60 SLEEP 50
2. Press SLEEP to review the remaining time before switch o. Your unit will also briey
display the sleep time remaining every minutes.
3. To cancel the sleep timer press SLEEP repeatedly until SLEEP OFF shows on the
display.
GB
17
EQ Control
This system supports a variety of equalizers and sound eects.
During playback, press EQ on the remote control to select a desired music mode. Each time
EQ is pressed, the music mode will change to the next one as follows:
FLAT CLASSICROCK JAZZPOP
Software Version
1. In DAB or FM mode, press and hold MENU/INFO on the unit or press MENU on the
remote control and then press buttons to select <SW version>. Press /ENTER/
PAIR on the unit or press ENTER on the remote control to conrm.
2. The software version will show on the display.
3. Press MENU/INFO on the unit or press MENU on the remote control to exit.
System Reset
There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be available.
1. Ensure the unit is switched on.
2. Press the MODE button repeatedly and select DAB mode.
3. Press the button to open the CD tray
4. With the unit in DAB mode and the CD tray open press and hold the /ENTER/PAIR
button on the unit.
The unit will reset itself. Once it has reset it will automatically start to scan for DAB radio
stations.
After the system reset, all the tuned stations, FM/DAB preset stations will be erased.
GB
18
DAB Operation
If the unit is connected to the mains power and then switched on from standby for the rst
time, the unit will automatically enter into the DAB mode and perform auto scan function.
During the scan the display will show Scanning… together with a slide bar that indicates
the progress of the scan and the amount of stations that have been found so far.
Once the scan has nished, the unit will select the rst alphanumerically found station. To
explore the found stations, press .
Full Scan
The full scan will search for the entire DAB Band III channels. After the scan has nished, the
rst alphanumerically found station will be automatically selected.
1. To activate auto scan, press /SCAN and the display will show Scanning … and a
progressing slide bar.
2. Or press and hold MENU/INFO button on the unit or press
MENU button on the remote control, then to select
<Full scan>. Press /ENTER/PAIR button on the unit or
ENTER button on the remote control to conrm. The display will show “Scanning...
and a progressing slide bar.
3. All the stations that have been found will be stored automatically. To explore and listen
to the found stations, press to select.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you
when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press and hold MENU/INFO button on the unit or press MENU on the remote control
and then press to select <Manual tune>.
Press /ENTER/PAIR on the unit or press ENTER on the remote control to conrm.
2. Press to cycle through the DAB channels, which are numbered from 5A to 13F.
3. Press /ENTER/PAIR on the unit or press ENTER on the remote control to add selected
channel to station list.
Secondary Services
You may see a > symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press /ENTER/PAIR on the unit or ENTER on the remote
control when the “> appears in the display before the station name. When the secondary
service ends, the unit will automatically switch back to the primary station.
GB
19
DRC (Dynamic Range Compression)
If you are listening to music with high dynamic range in a noisy environment, you may wish
to compress the audio dynamic range.
1. During DAB mode, press and hold MENU/INFO on the unit or MENU button on the
remote control and then press to select <DRC>. Press the /ENTER/PAIR on the
unit or ENTER on the remote control to conrm.
2. Press to select <DRC high/low/o> and press ENTER to conrm.
Pruning radio stations
You may remove all unavailable stations from the list.
1. During DAB mode, press and hold MENU/INFO on the unit or MENU button on the
remote control and then press to select <Prune>. Press the /ENTER/PAIR on
the unit or ENTER on the remote control to conrm.
2. Press to select <Yes> and then press /ENTER/PAIR on the unit or ENTER on
the remote control to conrm delete. Or select <No> to cancel.
Preset Stations
You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must rst be listening to the station that you would like to save,
press and hold PRESET/MEM on the remote control. The display will show Save to P#”.
2. Press PRESET to select your desired preset station number and then press ENTER to
conrm.
3. The station will be stored and the screen will then show Preset # Stored“.
Recalling a Stored Station
4. Once you have saved a station to one of the preset buttons, you can recall it by pressing
PRESET/MEM on the remote control.
5. Press PRESET to select your desired preset station number.
6. Press ENTER on the remote control to conrm the selection.
The stored stations will be saved into the memory and power o will not erase it. Storing a new station
into a preset location will erase the previously stored station in that location.
GB
20
/