2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCB146/05

Philips MCB146/05 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips MCB146/05 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MCB146
1
Quick Start Guide
2
User Manual
Quick Start Guide
User Manual
3
1
2
Remote Control
MCB146_05_QSG_Eng 4/2/10, 13:421
1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:
It is unnecessary to connect the DAB/
FM antenna since it is fixed to the
main unit.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control (DISC
or AUX, for example).
– Then select the desired function
(2;, 4, ¢ for example).
speaker
(right)
speaker
(left)
B
C
DAB/ FM wire antenna
AC power cord
1
2
MCB146_05_QSG_Eng 4/2/10, 13:422
5
1
2
3
4
Setting the clock
In standby mode, press and hold DISPLAY/CLOCK on the
remote control set for 2 seconds.
Press PROG on the remote control to select 12-hour
or 24-hour display.
Press DISPLAY/CLOCK to confirm.
➜ The clock digits for the hours flash.
Press 4 / ¢ to set the hours.
Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
Press 4 / ¢ to set the minutes.
Press DISPLAY/CLOCK to confirm the time.
6
7
1
2
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press down
on PULL TO OPEN to close the CD door.
Press 2; to start playback.
Press 9 to stop playback.
MCB146_05_QSG_Eng 4/2/10, 13:423
© Royal Philips Electronics N.V. 2010
All rights reserved.
http://www.philips.com MCB146_05_QSG_V3.0
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Programming and tuning to FM
stations
Select FM TUNER source.
1
2
Press SCAN for more than two seconds to program all
available stations (FM only).
Press PRESET +/- ( or 3 / 4 on the remote control) until the
desired preset station is displayed.
3
1
2
Press SOURCE (or DAB on the remote control) to select
DAB to start an automatic search of available DAB stations.
Press 4 / ¢ to change the DAB stations.
Tuning to DAB stations
5
To access setup options, press MENU, then use the navigation
control buttons to select.
3
Press 2; to confirm a selection.
4
To perform a local scan (in UK ), press briefly SCAN.
To perform a full scan (outside UK ), press and hold SCAN.
MCB146_05_QSG_Eng 4/2/10, 13:424
/