SilverStone SST-SDP08 Owner's manual

Category
HDD/SSD enclosures
Type
Owner's manual

This manual is also suitable for

SST-SDP08
3.5” to 2.5” bay converter
Special features:
Nickel-coated finish for durable appearance
Compatible with most 2.5” hard drive
Available for 3.5” drive bay
Installation guide
1. Install your 2.5” hard drive into the
extension bracket and secure with
included screws as shown.
1. Setzen Sie die 2,5 Zoll-Festplatte
in das Slotblech ein und fixieren
Sie sie mit den mitgelieferten
Schrauben (s. Abb.).
1. Installare l’hard disk da 2,5” nella
sede preposta, ed assicurarlo al
supporto per mezzo delle viti in
dotazione.
1. Установите ваш 2,5-дюймовый
жесткий диск в переходной
кронштейн и закрепите прилагаемыми
шурупами, как показано на рисунке.
1. 2.5” 䚌☐ ☐⢰㢨⽀⪰ 䞉㣙
GGG⽀⢰䁇 ㉘㾌 䚐䟸, ┍⸽═ ⇌㇠⦐
GGGἬ⫰Ḱ ᵍ㢨 Ḕ㥉㐐䇩⏼␘.
1.āࡂ࡯࠼࠺ࠖࠬࠢ࠼࡜ࠗࡉࠍ
ᢵᔉࡉ࡜ࠤ࠶࠻ߦ߼ǃೇߩ
ࠃ߁ߦҬሲߩࡀࠫߢ೎ᅮߒ߹ߔDŽ
1.ᇛᙼⱘয়⹀⹳㺱ܹ䔝᦯
ᶊЁϺձ೪⼎ҹܻ䰘㶎㍆
䥪೎DŽ
1.ᇚᙼⱘয়⹀Ⲭ㺙ܹ䕀ᤶ
ᶊЁᑊձ೒⼎ҹݙ䰘㶎ϱ
䫕೎DŽ
1. Instale su disco duro de 2,5” en el
bracket de expansión y asegúrelo
con los tornillos que se incluyen
como se muestra.
1. Installez votre disque dur 2.5” dans le
casier d’extension et fixez-le avec les
vis incluses comme montré.
ㅔԧЁ᭛
ㅔԧЁ᭛ ㅔԧЁ᭛
NO:G11209670
Specifications:
2.ᢵࡉ࡜ࠤ࠶࠻ࠍ޿ߡ޿ࠆā
ݙ࠼࡜ࠗࡉࡌࠗߦ߼߹ߔDŽ
ᖙ㽕 ߇޽ࠇ߫Ҭሲߩ
ࡀࠫߢࡉ࡜ࠤ࠶࠻ࠍ೎ᅮߒ߹ߔDŽ
2.ᇛ䔝᦯ᶊ㺱ܹぎⱘ䲅㮣য়
㺱㕂ῑˈϺձ䳔∖ҹܻ䰘㶎
㍆䥪೎DŽ
2.ᇚ䕀ᤶᶊ㺙ܹぎⱘ䱤㮣য়
㺙㕂ῑˈᑊձ䳔∖ҹݙ䰘㶎
ϱ䫕೎DŽ
2. Insert the extension bracket into an
empty 3.5” internal drive bay. Use the
included screws to secure the bracket
if necessary
2. Setzen Sie das Slotblech in einen
leeren internen Laufwerksschacht
(3,5 Zoll) . Schrauben Sie das Slotblech
bei Bedarf mit den mitgelieferten
Schrauben fest.
2. Inserire quindi quanto ottenuto in
un bay interno da 3,5”. Se necessario,
utilizzare le viti in dotazione per
assicurarlo allo chassis.
2. Вставьте переходной кронштейн в
пустой внутренний 3,5-дюймовый
отсек. При необходимости закрепите
кронштейн прилагаемыми шурупами.
2. 䞉㣙 ⽀⢰䁇㡸 3.5” ⇨⺴ ☐⢰㢨⽀
GGGⷔ㢨㜄 ㉘㾌 䚝⏼␘. 䙸㟈䚌␘⮨
GGG┍⸽═ ⇌㇠⦐ ⽀⢰䁇㡸
GGGḔ㥉㐐䇩⏼␘.
2. Inserte el bracket de expansión en un
espacio interno vacío de 3,5”. Use los
tornillos que se incluyen para asegurar
el bracket si es necesario.
2. Insérez le casier d’extension dans une
baie interne pour lecteur 3.5” vide.
Utilisez les vis incluses pour fixer le
casier adaptateur si nécessaire
ㅔԧЁ᭛
ㅔԧЁ᭛
ㅔԧЁ᭛
Model
Color
Material
Application
Capacity
Overall Dimension
weight
SST-SDP08
Nickel-coated
1.0 mm SPCC with Nickel plating
3.5”drive internal bay
2 x 2.5" hard drives
101.6 mm (W) x 25.4mm (H) x 146mm (D)
160g
February, 2009
  • Page 1 1
  • Page 2 2

SilverStone SST-SDP08 Owner's manual

Category
HDD/SSD enclosures
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI