ICP G-UV-B100 User manual

Brand: ICP

Model: G-UV-B100

Type: User manual

G-UV-B100 UV Sterilizing Box On the Go

(UV Dual-Wavelength: 253.7nm & 185nm)

Introduction:

This UV Sterilizing Box can destroy the molecular

structure of DNA (deoxyribonucleic acid) or RNA

(ribonucleic acid) in bacterial viruses using

ultraviolet rays with the wavelengths of 253.7 &

185nm, resulting in the elimination of growth and

regeneration cells, so as to achieve the effect of

sterilization and disinfection. This is done using deep

ultraviolet rays which can get rid of the odor by

cracking the molecular structure of the odor.

This product uses 253.7nm UV cold cathode UV tube,

which can produce a small amount of ozone when

working to improve the sterilization effect. Avoid eye

contact with UV light. Use only with lid closed tightly.

The box contains a protective switch to turn off the

LED when the box is opened.

Specification:

Item No G-UV-B100

Materials ABS+PC

Interface Type-C

Power 2W

Voltage 5VDC

Dual-Wavelength 253.7nm & 185nm

Charging Time 2-3 hours

Band UVC

Capacity 2000mAh

Optical Power

550-750UW/c ㎡

Cubage 3.5L

Standard GB19258-2012

Sterilization Principle Cold cathode UV tube

Size

230*160*142mm

Weight 660g

Instructions:

The BP62 contains a rechargeable battery. The

box must either be plugged in or charged prior

to usage.

1) Open lid

2) Place items to be sterilized flat and

spread out on the metal rack in the box

3) Close the lid

4) Press the power button to start the 5

minute timer (UVC lamp will be fully

engaged after 2 minutes)

5) When timer has expired, open lid and

remove items from the box

Box contents:

One G-UV-B100

One USB C charging cable

ICP G-UV-B100 User manual

ICP G-UV-B100 User manual

Related papers

Other documents