Directions
1) Charge the wand for 30 minutes.
2) Lay items you wish to disinfect on a flat
surface
3) Press Power Switch twice to activate the
UVC light.
2) Pass the wand over the surface of the
items that you would like to sterilize within
5-10cms back and forth for 20-30s, in order
to kill virus and bacteria from the surface.
3) Repeat process for additional sides
4) Press button to turn off UVC LED’s
Indicator LED:
Red means recharging
Blue means charge complete
UVC light can work for up to 3 hours when
fully charged.
Box Contents:
One G-UV-W100
One USB C Charging cable
G-UV-W100 UV Sanitizing Wand
(UV Wavelength: 260-280nm)
Introduction:
UVC LED disinfection is a widely used and safe technology used both
commercially and for personal use. UVC lights which utilize wavelengths between
260nm-280nm are capable of destroying the virus/germs’ DNA or RNA structure,
making it incapable of reproduction and can kill almost all common bacteria in
daily life.
90% of disinfection cabinets and medical institutions use traditional
UV disinfection technology, and LED UV disinfection is an upgraded
technology based on this. It has become the preferred technology in
various fields and has a stronger sterilization effect.
Specifications:
Voltage:
5 V DC
Current:
≤500 mA
Net Weight:
118 g
Gross Weight:
158 g
Dimension:
320 X 32.3 X 31.5 mm
LED Model:
UV3535 (6V, 2W, 9 pcs)
LED Wavelength:
260-280nm (UVC level)
Battery:
Rechargeable Li-Battery type
18650# (2000mA)
Charge by:
USB C
Standby time:
4-5 hours
Disinfection time:
10-20 s
Disinfection distance:
＜
5 cm
Disinfection ratio:
99.99%
Single button control
Press 1: LED light
Press 2: Activate UVC wand
Press 3: Power off
/
