G-UV-L100 360° UV Sterilization Lamps with Remote Control
UV Wavelength: 185nm
Technical data:
Name:
UV Sterilization Lamp with Remote Control
Power:
38W
Voltage:
110/120 V AC
Frequency:
50/60 Hz
Sterilization factor:
Quartz ultraviolet
Ozone wave length:
185nm
Effective area:
270-360 sq. Ft.
Current:
0.32A
Cable length:
1.5m
Dimensions:
φ20 X 41.5cm
Weight:
1.3kg
Remote control range:
7-10m
For Best Results
It is recommended to keep the lamp in an enclosed
space.
After sterilization process is complete, it is
necessary to ventilate space for 45 minutes.
Caution:
Do not operate when in the presence of humans,
pets or plants.
This product uses ultraviolet radiation and ozone to
kill bacteria. Long-term exposure to ultraviolet rays
and ozone is harmful to humans and pets and may
cause sunburn, blurred vision, and breathing
problems.
Avoid eye contact
Radiation can cause severe eye damage
Handle with care
The lamp is fragile.
The product may not be used by children under 14
years of age.
Directions
Avoid contact with eyes and skin. UV radiation is
harmful to humans, pets and plants
1) Remove all people, plants and animals from
room. Close windows and doors.
2) Place UV lamp in center of room on a firm
surface.
3) Use the remote control to turn on the Lamp
4) Select desired time
5) Lamp will start to beep to indicate it is
starting. Lamp will start in 10 seconds.
6) Exit room and seal off for duration of
sterilization
7) After sterilization cycle is complete, open
window to ventilate room for 30-40 minutes.
Box contents:
One G-UV-L100
One remote controller with batteries
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Johnson Sterilizer User manual
-
CPS UVC 19 STERI-LAMP User manual
-
iconBIT U LIGHT COMBO (TRS2075) User manual
-
-
-
-
Verilux VH12 Owner's manual
-
FIELD CONTROLS 24v User manual
-
Sanyo MCO-18AIC User manual
-