2. WarmlyYours
  3. SCV-DUAL

WarmlyYours SCV-DUAL Product information

  • Hello! I've reviewed the Typical Line Diagram for the WarmlyYours SCV-DUAL snow melting system. This document details the wiring for a 120-240V system with three heating circuits, and how the system should be wired, including the conduit requirements and watertight termination guidelines. I'm here to assist with any questions you may have about this diagram.
  • What voltage range does the system support?
    How many heating circuits can the system handle?
    What type of conduit is recommended for mounting?
SNOW MELTING DIAGRAM: 120–240V - TYPICAL LINE DIAGRAM
(FOR 3 CIRCUITS/CABLES) WITH SCV-DUAL WITHOUT RELAY
Installation Support •(800) 875-5285 • www.WarmlyYours.com
Heater cable 20ft (120V and 240V) and 50ft (208V) cold leads to
be taken through 3/4” (19mm) rigid metal conduit back to J-boxes.
outsideinside
HEATER CABLE / MAT #1
HEATER CABLE / MAT #2
HEATER CABLE / MAT #3
Designed to be mounted using
either 3/4" or 1" PVC conduit,
supplied by customer.
INSTALL IN ACCORDANCE WITH THE REQUIREMENTS OF ALL APPLICABLE ELECTRICAL AND BUILDING CODES
AND REGULATIONS. ENSURE THAT ALL CONDUIT/CABLE TERMINATIONS ARE WATERTIGHT.
BLACK
YELLOW
WHITE
N / L2
L1
120–240 VAC
YELLOW
120–240VAC
BREAKER PANEL
J-BOX
(conduit size as per installer / local code requirements)
/