2. WarmlyYours
  3. SCV-120

WarmlyYours SCV-120 Product information

  • Hello! I've reviewed the diagram for the SCV-120 snow melt system. This document provides a visual guide of one or multiple circuits with relay panel, including heater cable connections, power supply and control details. I'm ready to answer your questions about this diagram.
  • What are the heater cable pigtail cold leads to be taken through?
    What is the voltage of the circuits?
    What is the voltage of the control power?
    What size rigid conduit is recommended for mounting?
    What is the maximum AC load for the device?
240V CIRCUITS
120V
CONTROL
POWER
Heater cable pigtail cold leads to be taken thru
3/4” (19mm) rigid metal conduit back to J-boxes.
outsideinside
(conduit size as per installer)
240V
240V
240V
240V
240V
240V
240V
J-BOX
J-BOX
HEATER CABLE / MAT #1
HEATER CABLE / MAT #2
HEATER CABLE / MAT #3
HEATER CABLE / MAT #4
HEATER CABLE / MAT #5
HEATER CABLE / MAT #6
SCV-120
VALUE
CONTROL
120/240 VAC
BREAKER PANEL
RLY-12P
RELAY PANEL
1/2” Rigid conduit for mounting
(customer supplied)
OR
INSTALL IN ACCORDANCE WITH THE REQUIREMENTS OF ALL APPLICABLE ELECTRICAL AND BUILDING CODES
AND REGULATIONS. ENSURE THAT ALL CONDUIT/CABLE TERMINATIONS ARE WATERTIGHT.
120 VOLT AC, LOAD TO 16 AMPS
BLACK
YELLOW
YELLOW
WHITE
RELAY
NEUTRAL
LINE
120V 50/60Hz
SNOW MELT LINE DIAGRAM: SCV-120
ONE OR MORE CIRCUITS
WITH RELAY PANEL
24/7 Installation Support • Lifetime Technical Assistance • www.WarmlyYours.com • (800) 875-5285
10250 1/11
/