2. PROAIM
  3. P-CBTR-01

PROAIM P-CBTR-01 User manual

  • Hello! I've reviewed the assembly manual for the PROAIM Reflector Panel P-CBTR-01. This document provides instructions on how to set up this reflector with its reversible panels, and I'm here to help you with any questions you might have about its assembly, its features, or its compatibility with standard light stands.
  • What is included in the box?
    Can the reflector be mounted on a C-stand?
    What is the function of the silver and white sides of the reflector?
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Cube Trio-Reector w Reversible Silver/White
Reector Panels (P-CBTR-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
3 x Reversible silver / white reector
2 x Reector Arm
1 x T-Bar
2 x Standard
Adaptors
Spigot Mul Angle
Adapter 12 Quick Clips
(16mm)
4mm, 2.5mm Allen Key
Assembly Manual
2
• Aer mounng the T-Bar, secure it by
ghtening its knob.
• Now, loosen the knob of the Reector arm.
• Aach the Reector arm with the T-Bar.
• Repeat the same process with the second
Reector arm.
• Aer aaching the Reector arm, ghten
its knob to secure the arms properly.
• Loosen the adapter from the Reector arm.
• Set the adapter per your requirement and
ghten it.
Cube Trio-Reector Setup
• Loosen knob of the T-Bar and mount it a
C-Stand (Not Included), as shown in the
image.
• The Reector arm can be moved per your
requirement.
3
• Aach the Quick clips to the Reector and
secure them using the bolts from the
backside.
• Aach the Reector with the reector arm,
as shown in the image.
NOTE: Quick clips are included on both panel
sides for mounng the reector arms.
• The reversible silver/white Reector has a
mul-angle adapter for posioning at any
angle.
Feature: The Silver Fabric is more reecve.
The white cloth removes uncorrected glare
from the subject.
• Loosen the knob of the Mul adaptor and
mount it on the standard adaptor.
• Remove bolts from the Quick clips, as shown
in the image.
• Loosen the knob of the standard adapter
and mount it on the C-Stand (Not Included).
• Now, secure it by ghtening back the knob.
Feature: The reector ts standard 5/8 light
stands and c-stands with its compable baby
pin receiver.
4
• Now, insert the Spigot in the mul-adapter.
• Aer the inseron, secure it by ghtening
the knob.
• Mount the T-bar with the Reector arm on
the Spigot.
• Aer mounng on the Spigot, ghten the
knob and loosen the adapter for the
movement of the Reector, as shown in the
image.
• Aer mounng the Mul adaptor, secure it
using the knob.
• The setup is fully assembled.
Feature: The Reector can be mounted
separately or all three together with 360°
panel orientaon, allowing you to set panels
horizontally, vercally, single panels in a row,
or at any angle without moving the enre
setup.
5
YOUR PROAIM CUBE TRIO-REFLECTOR W
REVERSIBLE SILVER/WHITE REFLECTOR PANELS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
/