OSP Designs STT72 Operating instructions

Brand
OSP Designs
Model
STT72
Category
Fireplaces
Type
Operating instructions
Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.officestar.net or call or write us.
STT72
August, 2020
STATLER TV STAND 72’’
LIMITED WARRANTY
OSP Home Furnishings® warrants to the original purchaser that this product will be free from defects in material and workmanship as
described below. OSP Home Furnishings® will repair or replace, at its option, without charge to the original purchaser only, defective products
or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items out of production
may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of purchase as shown on your
original sales receipt. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection with product
abuse or misuse, use modification of, or attachments to the product, and products or parts not used, maintained, or installed in accordance
with the company’s installation, maintenance and/or applicable guidelines. There are no other warranties, express or implied, other than those
specifically described, including without limitation any implied warranty of merchantability or of fitness for a particular purpose. OSP Home
Furnishings® will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state. Our quality standards are among the highest in the industry. Sometimes, no
matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly
remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide model number,
proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings® will: (a) Supply compatible
components of current manufacture. (b) Repair the customer’s component. The customer must prepay freight on any components returned to
the factory. Return freight on components still in warranty will be paid by OSP Home Furnishings®.
1. Do not use this product unless all screws and bolts are securely tightened.
2. Check that all screws and bolts are tight every three months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. FOR INDOOR RESIDENTIAL USE ONLY.
(A) Top Panel (1 PC)
(C) Right Side Panel (1 PC)
(E) Upper Midde Panel (2 PCS)
(G) Left Middle Panel (1 PC)
(I) Lower Side Back Panel (2 PCS)
(K) Bottom Panel (1 PC)
(B) Left Side Panel (1 PC)
(D) Upper Back Panel (1 PC)
(F) Upper Shelf (1 PC)
(H) Right Middle Panel (1 PC)
(J) Lower Middle Back Panel (1 PC)
(L) Back Lower Panel (1 PC)
PARTS
(M) Left Lower Panel (1 PC)
(O) Side Adjustable Shelf (2 PCS)
(Q) Door (2 PCS)
(S) Side Trim (2 PCS)
(U) Foot (4 PCS)
(N) Right Lower Panel (1 PC)
(P) Middle Adjustable Shelf (1 PC)
(R) Middle Trim (1 PCS)
(T) Top Glass (1 PC)
PARTS
(V) Fire Place (NOT included, sold separately) (1 PC)
180°
CAM LOCK INSTALLATION
Screw in Cam Screw. Fully Tighten.
Align hole in panel with Cam Screw. Attach.
Screw Cam Nut in. Turn clock-wise until you feel
Cam Nut securely fasten to Cam Screw.
Fully tighten Cam Nut.
HARDWARE LIST
NO DRAWING DESCRIPTION SIZE QUANTITY
1Glue 1 PC
64 PCS
64 PCS
58 PCS
2 PCS
4 PCS
4 PCS
Cam Lock
Cam Bolt
Wooden Dowel
Handle
Machine Screw
Hinge
Ø
Ø
Ø
Ø
4 x 22 x 8mm
Ø
2
3
4
5
6
7
24 PCSWood Screw 4 x 14 x 6mm8
12 PCSShelf Pin Ø9
6 PCSGrommet Ø10
4 PCSAdhesive Pad Ø11
8 PCSPlug Ø12
6 PCSScrew 6 x 25 x 10mm13
11 PCSScrew 4 x 30 x 8mm14
1 PCAllen Wrench Ø15
4 PCSBracket Ø16
22 PCSWood Screw 4 x 14 x 8mm17
4 PCSWood Screw Ø18
25 PCSCam Cover Ø19
Ø
Phillips Screwdriver also needed for assembly (not provided).
ANTI-TIP KIT
THE BELOW PARTS ARE PRE-ASSEMBLED AND ARE LISTED AS A REFERENCE ONLY
NO DRAWING DESCRIPTION SIZE QUANTITY
WA Wood Screw 2 PCS
2 PCS
4 PCS
2 PCS
6 PCS
Anchor
Mounting Bracket
Mounting Strap
Plastic Base Tack
4 x 35 x 8mm
Ø
Ø
Ø
Ø
WB
WC
WD
ZA
16 PCSGlass Clip ØZB
16 PCSWood Screw 4 x 12 x 8mmZC
4 PCSEnd Cap ØZD
STEP 2
STEP 1
(3)
(A)
(B)
FULLY TIGHTEN CAM BOLTS (3).
FULLY TIGHTEN CAM BOLTS (3).
(1)
(4)
(C)
(D)
(3)
(4)
(4)
(4)
(4)
(4)
(4)
(4)
x18
x4
1
3
4
x6
x12
1
3
4
STEP 4
STEP 3
(F)
(F)
(4)
(3)
FULLY TIGHTEN CAM BOLTS (3).
(E)
(3)
(4)
(4)
(3)
FULLY TIGHTEN CAM BOLTS (3).
(3)
(I)
(3)
(4)
(4)
(4)
(4)
(4)
(G)
(H)
x2
x2
x16
x8
1
3
4
x4
x26
1
3
4
STEP 6
STEP 5
(U)
FULLY TIGHTEN WOOD SCREWS (17) & CAM BOLTS (3).
FULLY TIGHTEN ALL SCREWS (6 & 8) & CAM BOLTS (3).
x18
3
x16
17
(3)
(3)
(K)
(K)
(17)
(17)
x2
3
x2
6
x4
8
(L)
(M)
(N)
(R)
(4)
(4)
(4)
(3)
(3)
(Q)
(5)
(6)
(7)
(8)
(4)
x8
4
*repeat for second door
STEP 8
STEP 7
FULLY TIGHTEN SCREWS (13) & CAM LOCKS (2).
FULLY TIGHTEN CAM LOCKS (2).
SOFT NON MARRING SURFACE
x6
13
(13)
(15)
(T)
(A)
x2
2
x6
2
(L) (N)
(M)
(2)
(K)
(2)
STEP 10
STEP 9
(I)
TOP
TOP
FRONT
TOP
TOP
x8
2
x4
2
(H)
(G)
(I)
FULLY TIGHTEN CAM LOCKS (2).
(2)
(2)
FULLY TIGHTEN CAM LOCKS (2).
(F)
STEP 12
STEP 11
(B)
FRONT
TOP
FRONT
TOP
FRONT
x12
2
x8
2
FULLY TIGHTEN CAM LOCKS (2).
FULLY TIGHTEN CAM LOCKS (2).
(2)
(2)
(F)
(E)
(E)
(D)
(C)
(D)
(I)
1
*use glue (1) for wooden dowels (4)
STEP 14
STEP 13
(K)
(2)
FULLY TIGHTEN CAM LOCKS (2).
x8
2
FULLY TIGHTEN CAM LOCKS (2).
(2)
(C)
(G)
(B)
(I)
(F)
(I)
x4
2
1
*use glue (1) for wooden dowels (4)
STEP 16
STEP 15
(A)
x4
x16
11
8
x5
10
x12
2
(10)
FULLY TIGHTEN CAM LOCKS (2).
(Q)
(Q)
(8)
(11)
FULLY TIGHEN WOOD SCREWS (8).
STEP 17
STEP 18
(back view)
(19)
x24
19
x2
WC
x2
17
FULLY TIGHTEN WOOD SCREWS (17).
(WC)
(17)
STEP 19: TV STAND OPTION
!STOP!
SEE BELOW BEFORE PROCEEDING
There are two options for you on this product
1) You can use it as a TV stand: Continue on to Steps 19-22
2) You can use it as a fireplace: Continue on to Steps 23-27
FULLY TIGHTEN SCREWS (14).
(I)
(J)
(I)
(G)
(I)
*use glue (1) for wooden dowels (4)
(back view)
x4
14
1
STEP 20: TV STAND OPTION
STEP 21: TV STAND OPTION
x1
10
x12
9
(10)
(9)
(O)
(P)
(O)
STEP 22: TV STAND OPTION
STEP 23: FIRE PLACE OPTION
x8
12
(12)
FULLY TIGHTEN SCREWS (14).
*use glue (1) for wooden dowels (4)
(R)
(9)
(14)
x8
9
x3
14
1
STEP 24: FIRE PLACE OPTION
STEP 25: FIRE PLACE OPTION
(12)
FULLY TIGHTEN SCREWS (14).
x4
14
(12)
(14)
(14)
(O)
(O)
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

OSP Designs STT72 Operating instructions

Brand
OSP Designs
Model
STT72
Category
Fireplaces
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents