Chore-Time MV2483B OMNIFLUX Inlet Installation guide

Brand
Chore-Time
Model
MV2483B OMNIFLUX Inlet
Type
Installation guide

Chore-Time MV2483B OMNIFLUX Inlet is an advanced air inlet valve designed to provide precise airflow control in various agricultural and industrial applications. Crafted from high-quality polyurethane, it combines durability with optimal performance, even in extreme temperatures.

The inlet features four independently adjustable wing-shaped louvers that enable you to direct airflow in any desired direction. This flexibility allows you to customize airflow patterns to suit specific ventilation needs, ensuring efficient air distribution throughout your space.

With a capacity of up to 3767 CFM at a static pressure of 0.16 inch H20, the MV2483B OMNIFLUX Inlet is suitable for large-scale ventilation projects. Its unique movable plate design simplifies installation and cleaning, allowing you to adjust airflow settings and maintain the inlet effortlessly.

Chore-Time MV2483B OMNIFLUX Inlet is an advanced air inlet valve designed to provide precise airflow control in various agricultural and industrial applications. Crafted from high-quality polyurethane, it combines durability with optimal performance, even in extreme temperatures.

The inlet features four independently adjustable wing-shaped louvers that enable you to direct airflow in any desired direction. This flexibility allows you to customize airflow patterns to suit specific ventilation needs, ensuring efficient air distribution throughout your space.

With a capacity of up to 3767 CFM at a static pressure of 0.16 inch H20, the MV2483B OMNIFLUX Inlet is suitable for large-scale ventilation projects. Its unique movable plate design simplifies installation and cleaning, allowing you to adjust airflow settings and maintain the inlet effortlessly.

Capacity
Operation Information
Airflow
General Information
Both the housing and the movable plate of this type
of inlet valve are manufactured out of high-quality
polyurethane. Q-lon seals are placed around the
outside of the housing. Therefore this inlet valve
is perfect for use at extremely low temperatures.
The four wing shaped louvres can be positioned
independently to guide air in any desired direction.
The polyurethane plate slides along a guide rail using
specially developed gliders which prevent it from
sticking. The movable plate can be removed without
having to adjust the position of the louvres. This
unique feature makes installation and cleaning easier.
The Omniflux has been developed to direct the airflow
independently from the required capacity. This means
that this inlet valve is very suitable for use in houses
with obstacles or in very wide houses.
Capacity in CFM at a static pressure of inch H
2
0 without Screen
Louver Position .04 .08 .16
Horizontal 1883 2619 3767
30° in one direction 1324 1883 2648
30° in two directions 1265 1766 2530
Door Travel 16.5" [42 cm]
Force to lift Plate 6.6 lbs [29.5 Newtons]
MV2483B
November 2019
TPI Omniflux Inlet
Installation Manual
Installation
2
MV2483B
Do’s and Dont’s
Make sure to mount inlets on a flat wall surface.
A flat wall surface ensures optimal performance and, therefore,
air leakage will be reduced to a minimum. For optimal functioning, ensure to caulk all the sides of the inlet
with a silicon sealant.
Do not use foams or fillers to fill space in between the inlet and the wall.
Foams and fillers might cause damage to the inlet or cause it to jam as they have different expansion values
due to temperature differences. When in doubt, please ask your supplier for additional information.
For the set-up, connect the inlet to the main cable in closed position.
Ensure the inlet is closed when connecting it to the main cable, as this will ensure that all of the inlets are
connected in the same way and fewer adjustments are needed to optimize the set-up.
Use screws with washers for mounting the inlets into the wall and be careful with the
polyurethane skin.
With the use of washers for mounting the inlets into the wall, you can prevent the screw from sinking into the
flange or skin of the inlet. The outer skin of the polyurethane is hard, but the force exerted on the screws during
installation might penetrate the skin.
Cleaning
Pay close attention while cleaning the inlets, avoid using corrosive cleaning solutions that might harm the
polyurethane. Also make sure not to use too much pressure with the pressure washers as it might damage the
skin of the inlets. Use max. 1740 PSI at a minimal distance of 4” and temperatures not exceeding 120 F.
Framing
Installation
3-13/16"
[9.7 cm]
3
0
-
1
/
8
"
[
7
6
.
5
c
m]
2
9
-
7
/
8
"
[
7
6
c
m
]
29-7/8" [76 cm]
33-7/8" [86.1 cm]
1" [2.5 cm]
18-1/2"
[47 cm]
18-3/4" [47.5 cm]
Installation
3
MV2483B
Installing Screen/Mounting
Attach Screen to inlet with ten .75" long Screws and ten Washers included.
Attach The Inlet to the Wall with Screws and Washers as shown below. It is important to use washers to prevent
the screw from sinking into the flange or skin of the inlet. The outer skin of the polyurethane is hard, but the force
exerted on the screws during installation might penetrate the skin.
Assembly
7.5" [19 cm]7.5" [19 cm]
7.5"
[19 cm]
7.5"
[19 cm]
Mounting Screws
and Washers
Not Included.
.75" Screws and
Washers Included.
Screen
Part Numbers
4
MV2483B
MADE TO WORK.
BUILT TO LAST.
®
Revisions to this Manual
Page No. Description of Change ECO
Various Changes 34388
Released as version "B"
Chore-Time Group, A division of CTB, Inc.
PO Box 2000
Milford, Indiana 46542-2000 USA
Phone (574) 658-4101 Fax (877) 730-8825
Email: choretime@choretime.com
Internet: www.choretime.com
Part Numbers
Item Description Part No.
1 Inlet Housing 56429
2 Inlet Door 56430
3 Inlet Screen 56431
4* Connection Set 56432
*Includes hardware and other items required for installation
1
2
3
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Chore-Time MV2483B OMNIFLUX Inlet Installation guide

Brand
Chore-Time
Model
MV2483B OMNIFLUX Inlet
Type
Installation guide

Chore-Time MV2483B OMNIFLUX Inlet is an advanced air inlet valve designed to provide precise airflow control in various agricultural and industrial applications. Crafted from high-quality polyurethane, it combines durability with optimal performance, even in extreme temperatures.

The inlet features four independently adjustable wing-shaped louvers that enable you to direct airflow in any desired direction. This flexibility allows you to customize airflow patterns to suit specific ventilation needs, ensuring efficient air distribution throughout your space.

With a capacity of up to 3767 CFM at a static pressure of 0.16 inch H20, the MV2483B OMNIFLUX Inlet is suitable for large-scale ventilation projects. Its unique movable plate design simplifies installation and cleaning, allowing you to adjust airflow settings and maintain the inlet effortlessly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents