GE Panda User manual

Panda

™

and Giraffe

™

Warmers

Service Manual

M1128921 Revision J

Class A

General Electric Company reserves the right to make changes in specifications and features shown herein, or discontinue the product

described at any time without notice or obligation. Contact your GE Representative for the most current information.

Trademarks

GE, the GE Monogram, Giraffe, and Panda are trademarks of General Electric Company.

All other third party trademarks are the property of their respective owner.

RH-1

Revision History

Revision Revision Date Revision Description

J May 2017

Updated part numbers, Masimo SPO

2

cable accessories

(Appendix A), and format of front and back covers.

H July 2016 Implemented updates supporting LED display design change.

G March 2016

Added sample UDI symbol and description, and scale checkout

and calibration procedures. Updated part numbers and names of

Panda and Giraffe Warmers.

F October 2014

Added printing specification to Service Manual bill of material

(BOM).

E June 2014 Added CFDA and new RoHS accessories.

D July 2013

Updated Masimo SET product names and Wall Mount Warmer

installation instructions for fixed surfaces.

C May 2013

Updated enclosure dimension specifications and addressed

bumper installation for Wall Mount Warmers (Appendix E).

B March 2013

Corrected title of persons responsible for installing Wall Mount

Warmers.

A February 2013

Implemented updates supporting Freestanding and Wall Mount

Warmers.

005 September 2011 Implemented IEC 3rd edition compliance updates.

004 January 2010 Added language disclaimer.

003 December 2008 Implemented updates supporting software changes.

002 November 2007 Implemented graphic improvements and text changes.

001 October 2007 Initial release.

RH-2 Service Manual

Table of Contents

TOC-1

About this Manual .............................................................................................................i

Scope and Intended Users ...........................................................................................................................................i

Conventions.........................................................................................................................................................................i

User Responsibility ...........................................................................................................................................................i

Important Safety Information.......................................................................................iii

Warnings, Cautions, and Notes............................................................................................................................... iv

Service Language Disclaimer.............................................................................................................................v

Symbols ............................................................................................................................................................................ xiii

Regulatory.......................................................................................................................................................................xiv

Standards.................................................................................................................................................................xiv

Chapter 1: Functional Description.............................................................................1-1

1.1 Introduction ..........................................................................................................................................................1-1

1.1.1 Mechanical Controls and Cable Connections ...........................................................................1-4

1.1.2 Controls and Displays...........................................................................................................................1-7

1.2 Mechanical Modules.........................................................................................................................................1-8

1.2.1 Heater Head Assembly ........................................................................................................................1-8

1.2.2 Rails...............................................................................................................................................................1-8

1.2.3 Optional Resuscitation Assembly (Bedded and Freestanding Only)...............................1-8

1.2.4 Probe Panel Assembly..........................................................................................................................1-8

1.2.5 Base Assembly (Bedded and Freestanding Only) ....................................................................1-8

1.2.6 Bed Assembly (Bedded Only).............................................................................................................1-9

1.2.7 Optional In-Bed Scale (Bedded Only).............................................................................................1-9

1.2.8 Optional SpO2 Module..........................................................................................................................1-9

1.2.9 Giraffe Shuttle Accessory (Bedded Only)......................................................................................1-9

1.3 System Functions............................................................................................................................................1-10

1.3.1 System Overview (Fully-Loaded Bedded Shown)..................................................................1-10

1.3.2 Hands Free Alarm Silence................................................................................................................1-11

1.3.3 Watchdog................................................................................................................................................1-11

1.3.4 Battery Management.........................................................................................................................1-12

1.3.5 Power Fail................................................................................................................................................1-13

1.3.6 External Communication..................................................................................................................1-15

1.3.7 Service Mode..........................................................................................................................................1-16

1.3.8 Display.......................................................................................................................................................1-16

1.3.9 Touch Panel............................................................................................................................................1-16

1.3.10 Elevating Base (Bedded Models Only)......................................................................................1-17

1.3.11 Observation Lights.......................................................................................................

.....................1-18

1.3.12 Procedure Light (Optional on Panda Warmer) ....................................................................1-18

1.3.13 Heat Control ........................................................................................................................................1-19

1.3.14 Scale (Bedded Models Only) .........................................................................................................1-23

Table of Contents

TOC-2 Service Manual

1.3.15 SpO2........................................................................................................................................................1-23

1.3.16 Alarms.....................................................................................................................................................1-24

1.3.17 Equipment Grounding.....................................................................................................................1-25

1.3.18 AC/DC Power Distribution .............................................................................................................1-26

1.4 RS-232 Serial Data..........................................................................................................................................1-27

1.4.1 RS-232 Connector ...............................................................................................................................1-27

1.4.2 Data Stream...........................................................................................................................................1-27

1.4.3 Nurse Call ................................................................................................................................................1-28

Chapter 2: Installation, Maintenance, and Checkout ............................................2-1

2.1 Warmer Maintenance Schedule.................................................................................................................2-1

2.1.1 Operator Maintenance.........................................................................................................................2-1

2.1.2 Service Maintenance.............................................................................................................................2-1

2.2 Installation and Service Checkout Procedures ....................................................................................2-2

2.2.1 Mechanical Checks................................................................................................................................2-2

2.2.2 Controller Checks (Figure E-2)...........................................................................................................2-3

2.2.3 Electrical Safety Tests...........................................................................................................................2-4

2.3 Mounting the Universal Adapter Plate.....................................................................................................2-5

2.4 Scale Checkout Procedures ..........................................................................................................................2-6

2.4.1 Visual Inspection.....................................................................................................................................2-6

2.4.2 Center Weight Check ............................................................................................................................2-6

2.4.3 Off Center Weight Check.....................................................................................................................2-6

2.4.4 Load Cell Check .......................................................................................................................................2-7

Chapter 3: Calibration .................................................................................................3-1

3.1 Scale Calibration (Bedded Models Only)..................................................................................................3-1

Chapter 4: Troubleshooting........................................................................................4-1

4.1 Service Mode........................................................................................................................................................4-1

4.1.1 Unit Information......................................................................................................................................4-1

4.1.2 Main Menu..................................................................................................................................................4-1

4.1.3 Unit Info Menu..........................................................................................................................................4-2

4.1.4 Operation Settings .................................................................................................................................4-3

4.1.5 Scale Calibration .....................................................................................................................................4-4

4.1.6 Date/Time...................................................................................................................................................4-5

4.1.7 Diagnostics ................................................................................................................................................4-6

4.1.8 Odometer Readings...............................................................................................................................4-9

4.1.9 Event Logs...............................................................................................................................................4-10

4.1.10 Set Defaults.............................................................................................................

.............................4-12

4.1.11 Heat Engine Diagnostic..................................................................................................................4-13

4.2 PC Command Line Interface......................................................................................................................4-13

4.2.1 Accessing the PC Command Line Interface............................................................................4-13

Service Manual TOC-3

4.2.2 PC Command Line Interface Main Menu..................................................................................4-14

4.2.3 PC Command Line Interface Sub-Menus..................................................................................4-15

4.2.4 Engineering Log Dump......................................................................................................................4-18

4.3 Troubleshooting Information.....................................................................................................................4-21

4.4 Troubleshooting Tables................................................................................................................................4-22

4.4.1 Lighting – Procedure Light...............................................................................................................4-22

4.4.2 Lighting – Observation Lights ........................................................................................................4-24

4.4.3 Display – LCD and Backlights.........................................................................................................4-27

4.4.4 User Interface – Touch Panel.........................................................................................................4-29

4.4.5 System Failure – Sys Fail Message ..............................................................................................4-29

4.4.6 Alarms/Indicators................................................................................................................................4-35

4.4.7 Electronics – Patient Temperature Probe.................................................................................4-37

4.4.8 Electronics – Scale (Bedded Models Only)................................................................................4-38

4.4.9 Electronics – SpO2...............................................................................................................................4-39

4.4.10 Electronics – Elevating Base (Bedded Models Only)..........................................................4-40

4.4.11 Electronics – Heat Control.............................................................................................................4-42

4.4.12 Electronics – Power Failure...........................................................................................................4-42

4.4.13 Mechanical (Bedded Models Only) ............................................................................................4-43

4.5 Troubleshooting Definitions and Acronyms.......................................................................................4-44

Chapter 5: Repair Procedures ....................................................................................5-1

5.1 Common Hand Tools........................................................................................................................................5-1

5.2 Heater Head Removal from Wall Bracket (Wall Mount Only)........................................................5-2

5.3 Heater Housing Repairs..................................................................................................................................5-2

5.3.1 Upper Heater Housing Removal......................................................................................................5-2

5.3.2 Heat Engine Assembly Removal (Figure 5-1 and Figure 5-5).............................................5-3

5.3.3 Heater Alignment Procedure.............................................................................................................5-5

5.3.4 Power Supply Replacement (Figure 5-1)......................................................................................5-8

5.3.5 Alarm Light Board Replacement (Figure 5-6 and Figure 5-8) ............................................5-8

5.3.6 Replacing an Observation Light Bulb............................................................................................5-9

5.3.7 Replacing the Procedure Light Bulb............................................................................................5-10

5.4 Electronic Enclosure Repairs ....................................................................................................................5-10

5.4.1 Power Board (Figure 5-6 and Figure 5-7)..................................................................................5-10

5.4.2 Control Board (Figure 5-6 and Figure 5-7

) ..............................................................................5-11

5.4.3 Lithium-Ion Battery Replacement (Figure 5-6 and Figure 5-7)......................................5-11

5.4.4 Touch Panel or LCD Assembly (Figure 5-7 and Figure 5-8).............................................5-12

5.4.5 Observation Light Dimmer Control (Figure 5-8)....................................................................5-13

5.4.6 Standby Switch Replacement (Figure 5-8)..............................................................................5-13

5.4.7 Outlet Panel Repairs (Figure 5-9) ..................................................................................................5-14

5.4.8 F7 and F8 Fuse Replacement Instructions...............................................................................5-15

5.4.9 Maneuvering Handle..........................................................................................................................5-15

5.5 Probe Panel Housing Repairs....................................................................................................................5-16

5.5.1 Probe Panel Housing Disassembly (Figure 5-10 and Figure 5-11)................................5-16

5.5.2 SpO2 Interface Board Replacement (Figure 5-10 and Figure 5-11).............................5-16

TOC-4 Service Manual

5.5.3 SpO2 Connector/Flex Circuit Replacement (Figure 5-10 or Figure 5-11

as appropriate) ...............................................................................................................................................5-17

5.5.4 Scale Connector Replacement (Figure 5-10) (Bedded Models Only)............................5-18

5.5.5 Patient Probe Connector Replacement (Figure 5-10 or Figure 5-11

as appropriate) ...............................................................................................................................................5-18

5.5.6 Probe Panel Upper Housing Replacement ..............................................................................5-19

5.6 Appearance Strip Replacement...............................................................................................................5-20

5.7 Lower Unit Repairs (Bedded and Freestanding Models)...............................................................5-21

5.7.1 Removing the Bed (Figure 5-13) (Bedded Models Only).....................................................5-21

5.7.2 Elevating Column Replacement (Figure 5-14) (Bedded Models Only) .........................5-21

5.7.3 Foot Switches (Figure 5-14) (Bedded Models Only)..............................................................5-21

5.7.4 Caster Replacement (Figure 5-14) (Bedded and Freestanding Models).....................5-22

5.7.5 Adjusting Bed Height Using Manual Elevating Column (Bedded Model Only).........5-24

5.7.6 Base and Rail Mounting Block Replacement (Figure 5-14)

(Freestanding Models Only) ......................................................................................................................5-25

Chapter 6: Illustrated Parts ........................................................................................6-1

6.1 Heater Housing...................................................................................................................................................6-2

6.2 Electronics Enclosure .......................................................................................................................................6-4

6.3 Probe Panel Housing........................................................................................................................................6-8

6.3.1 Probe Panel Housing (with Masimo SET 1 SpO2 Jack)...........................................................6-8

6.3.2 Probe Panel Housing (with Masimo SET 2 or Nellcor SpO2 Jack).....................................6-9

6.4 Base Assembly (Bedded Models Only)...................................................................................................6-10

6.4.1 Elevating Column Special Instructions ......................................................................................6-10

6.5 Bed Assembly (Bedded Models Only).....................................................................................................6-13

6.6 Storage Options (Bedded Models Only) ................................................................................................6-16

6.7 Freestanding Model Parts...........................................................................................................................6-18

6.8 Wall Mount Model Parts...............................................................................................................................6-19

6.8.1 FRU Wall Mount Warmer Bumper Kit (2063179-001) Content.......................................6-20

6.8.2 FRU Wall Mount Warmer Bracket Kit (Language-Specific) Content ............................6-20

6.9 Harness List .......................................................................................................................................................6-21

6.10 Options..............................................................................................................................................................6-22

6.10.1 Optional Equipment.........................................................................................................................6-22

6.10.2 Replacement and Additional Parts...........................................................................................6-23

6.10.3 SpO2 Upgrade Kits ...........................................................................................................................6-24

6.10.4 Giraffe Scale Parts ............................................................................................................................6-26

6.10.5 Panda Scale Parts.............................................................................................................................6-26

6.10.6 Power Cords ........................................................................................................................................6-26

6.11 Labels.................................................................................................................................................................6-27

6.11.1 Labels on the Back of Giraffe Warmers or Panda iRes Warmers...............................6-27

6.11.2 Heater Grille Accessory Warning Label Set (Bedded Models)......................................6-28

6.11.3 Labels on Probe Panel Housing..................................................................................................6-29

Service Manual TOC-5

6.11.4 Control Panel Labels (Not Shown, See Figure 1-4).............................................................6-29

6.11.5 Labels on Freestanding Model....................................................................................................6-30

6.11.6 Labels on Wall Mount Model........................................................................................................6-32

6.12 Test Points........................................................................................................................................................6-36

6.12.1 Control Board......................................................................................................................................6-36

6.12.2 Power Board........................................................................................................................................6-37

6.13 Wiring Diagrams...........................................................................................................................................6-38

Appendix A: Specifications......................................................................................... A-1

A.1 Power Requirements and Accessory Outlets .......................................................................................A-1

A.2 Operating Environment...................................................................................................................................A-1

A.3 User Control Settings .......................................................................................................................................A-1

A.4 Performance ........................................................................................................................................................A-2

A.5 Mechanical Specifications.............................................................................................................................A-3

A.5.1 Bedded.........................................................................................................................................................A-3

A.5.2 Freestanding.............................................................................................................................................A-3

A.5.3 Wall Mount.................................................................................................................................................A-3

A.6 SpO2 Specifications..........................................................................................................................................A-4

A.6.1 Nellcor..........................................................................................................................................................A-4

A.6.2 Nellcor SpO2 Cables and Probes.....................................................................................................A-5

A.6.3 Power Fail Recovery..............................................................................................................................A-5

A.6.4 Masimo........................................................................................................................................................A-5

A.6.5 Masimo SpO2 Cables and Probes...................................................................................................A-7

A.6.6 Power Fail Recovery..............................................................................................................................A-7

Appendix B: Electromagnetic Compatibility............................................................B-1

B.1 Electromagnetic Compatibility (EMC) Guidance..................................................................................B-1

B.2 Manufacturer’s Guidance and Declaration Regarding Electronic Emissions........................B-1

B.3 Manufacturer’s Guidance and Declaration Regarding Electromagnetic Immunity...........B-2

B.4 International Electronic Commission (IEC) Guidance and Manufacturer’s

Declaration Regarding Electronic Immunity...............................................................................................B-3

B.5 Recommended Separation Distance between Portable and Mobile RF

Communications Equipment and the Warmer..........................................................................................B-4

Appendix C: Alarm Priorities...................................................................................... C-1

Appendix D: Troubleshooting ....................................................................................D-1

D.1 Service Mode (Application Software 1.0.9 and Earlier)....................................................................D-1

D.1.1 Unit-Specific Information ..................................................................................................................D-1

D.1.2 Operator Settings..................................................................................................................................D-2

D.1.3 Calibration ................................................................................................................................................D-3

TOC-6 Service Manual

D.1.4 Diagnostics Using Serial Port...........................................................................................................D-3

D.1.5 File Capture..............................................................................................................................................D-4

Appendix E: Installing Wall Mount Units ..................................................................E-1

E.1 Pre-Installation Preparation..........................................................................................................................E-2

E.2 Wall Mount Bracket Installation..................................................................................................................E-3

E.3 Bumper Installation (for Installations with Bassinets).......................................................................E-6

E.4 Heater Head Installation and Heater Alignment.................................................................................E-7

E.5 Mattress Height Label Installation (for Installations with Bassinets) ......................................E-10

E.6 Enclosure Dimensional Specification.....................................................................................................E-11

i

About this Manual

Scope and Intended Users

This service manual describes how to maintain, repair, and service the Panda and Giraffe Warmers that are

used in hospital delivery rooms, hospital newborn nurseries and neonatal intensive care units (NICU).

The intended users for this manual are biomedical engineering service providers of the hospital and GE

Service personnel.

Conventions

This section introduces the various types of warnings, cautions, information notes, and symbols used in this

manual to alert you to possible safety hazards and to provide you with additional information.

Note: A Note provides additional information to clarify a point in the text.

Important: An Important statement is similar to a note, but is used for greater emphasis.

User Responsibility

This Product will perform in conformity with the description thereof contained in this manual and

accompanying labels and/or inserts, when assembled, operated, maintained and repaired in accordance

with the instructions provided. This Product must be checked periodically. A defective Product should not be

used. Parts that are broken, missing, plainly worn, distorted or contaminated should be replaced

immediately. Should such repair or replacement become necessary, GE Healthcare recommends that a

telephone or written request for service advice be made to the nearest GE Healthcare Regional Service

Center. This Product or any of its parts should not be repaired other than in accordance with written

instructions provided by GE Healthcare and by GE Healthcare trained personnel. The Product must not be

altered without GE Healthcare’s prior written approval. The user of this Product shall have the sole

responsibility for any malfunction that results from improper use, faulty maintenance, improper repair,

damage or alteration by anyone other than GE Healthcare.

Warning: A Warning statement is used when the possibility of injury to the patient or the

operator exists. (The warning icon is yellow.)

Caution: A Caution statement is used when the possibility of damage to the equipment exists.

SENSITIVE TO ELECTROSTATIC DISCHARGE CAUTION: An electrostatic discharge (ESD)

Susceptibility symbol is displayed to alert service personnel that the part(s) are sensitive to

electrostatic discharge and that static control procedures must be used to prevent damage to

the equipment.

ii Service Manual

About this Manual

User Responsibility

iii

Important Safety Information

The service information is important for the safety of both the patient and operator and also serves to

enhance equipment reliability.

The information contained in this service manual pertains only to those models of products which are

marketed by GE Healthcare as of the effective date of this manual or the latest revision thereof. This service

manual was prepared for exclusive use by GE Healthcare service personnel in light of their training and

experience as well as the availability to them of parts, proper tools, and test equipment. Consequently,

GE Healthcare provides this service manual to its customers purely as a business convenience and for the

customer’s general information only without warranty of the results with respect to any application of such

information.

Furthermore, because of the wide variety of circumstances under which maintenance and repair activities

may be performed and the unique nature of each individual’s own experience, capacity, and qualifications,

the fact that a customer has received such information from GE Healthcare does not imply in any way that

GE Healthcare deems said individual to be qualified to perform any such maintenance or repair service.

Moreover, it should not be assumed that every acceptable test and safety procedure or method, precaution,

tool, equipment, or device is referred to within, or that abnormal or unusual circumstances may not warrant

or suggest different or additional procedures or requirements. This manual is subject to periodic review,

update, and revision. Customers are cautioned to obtain and consult the latest revision before undertaking

any service of the equipment.

Do not use malfunctioning equipment. If the system is under warranty, contact GE technical support at the

number on the back of the manual PRIOR to performing any repairs on the system.

Warning: Before servicing the Giraffe and Panda Warmers, read through this entire

manual. As with all medical equipment, attempting to use this device without a

thorough understanding of its operation may result in patient or user injury. This

device should be serviced only by authorized service personnel. Additional

precautions specific to certain procedures are found in the text of this manual.

Warning: The user or service staff should dispose of all the waste properly as per

federal, state, and local waste disposal regulations. Improper disposal could result

in personal injury and environmental impact.

Important Safety Information

Warnings, Cautions, and Notes

iv Service Manual

Warnings, Cautions, and Notes

Warning: Do not use the warmer in the presence of flammable anesthetics; an

explosion hazard exists under these conditions.

Warning: Thoroughly air dry the warmer after cleaning it with flammable agents.

Small amounts of flammable agents, such as ether, alcohol or similar cleaning

solvents left in the incubator can cause a fire.

Warning: Do not attempt to adjust the fixed base while a patient is in the bed. After

adjustments to the fixed base height have been made, ensure the fixed base is

locked in place before placing a patient in the bed.

Warning: Always connect the warmer directly to a hospital grade wall outlet.

Connecting to a power strip or another piece of equipment may result in shock

hazard.

Warning: Do not service, program or calibrate the warmer with the patient in the

bed.

Warning: Do not lean against side of warmer. Leaning against the side of the

warmer may cause it to tip over.

Warning: Bed-to-heater spacing less than approximately 85 cm will result in

incorrect operation and may adversely affect the patient’s condition.

Warning: This is a latex-free device. Latex is not to be used in the maintenance or

repair of this device.

Warning: The user or service staff should dispose all the waste properly as per

federal, state, and local waste disposal regulations. Improper disposal could result

in personal injury and environmental impact.

Warning: The heater head is 15 kg. Follow your local health and safety guidelines

for manual handling of heavy objects when lifting and carrying the heater head.

Caution: Servicing of this product in accordance with this service manual should

never be undertaken in the absence of proper tools, test equipment and the most

recent revision to this service manual which is clearly and thoroughly understood.

Caution: Always disconnect the power before performing service or maintenance

procedures detailed in this manual. Apply power only if you are specifically

instructed to do so as part of the procedure.

Important Safety Information

Warnings, Cautions, and Notes

Service Manual v

Note: Ranges listed in this supplement manual represent the operational ranges of the equipment. The

gauge ranges may exceed operational ranges.

Note: Air always means medical grade air.

Service Language Disclaimer

Caution: Technical competence required to service the warmers; the procedures

described in this service manual should be performed by trained and authorized

personnel only. Maintenance should only be undertaken by competent individuals

who have a general knowledge of and experience with devices of this nature. No

repairs should ever be undertaken or attempted by anyone not having such

qualifications. Genuine replacement parts manufactured or sold by GE Healthcare

must be used for all repairs. Read completely through each step in every procedure

before starting the procedure; any exceptions may result in a failure to properly and

safely complete the attempted procedure.

Caution: U.S. Federal law restricts this device to sale by, or on order of, a licensed

medical practitioner.

Caution: This device is for professional use only, by trained clinicians.

SENSITIVE TO ELECTROSTATIC DISCHARGE CAUTION: Use a static control work

station to ensure that static charges are safely conducted to ground and not

through static sensitive devices.

For professional use only

(EN)

WARNING:

This service manual is available in English only.

• If a customer’s service provider requires a language other than English, it is the

customer’s responsibility to provide translation services.

• Do not attempt to service the equipment unless this service manual has been

consulted and is understood.

• Failure to heed this warning may result in injury to the service provider, operator, or

patient from electric shock, mechanical hazards, or other hazards.

(BG)

ПРЕДУПРЕЖДЕНИЕ

Това упътване за работа е налично само на английски език.

• Ако доставчикът на услугата на клиента изиска друг език, задължение на клиента

е да осигури превод.

• Не използвайте оборудването, преди да сте се консултирали и разбрали

упътването за работа.

• Неспазването на това предупреждение може да доведе до нараняване на

доставчика на услугата, оператора или пациентa в резултат на токов удар,

механична или друга опасност.

Important Safety Information

Warnings, Cautions, and Notes

vi Service Manual

(ZH-CN)

警告

本维修手册仅提供英文版本。

• 如果客户的维修服务人员需要非英文版本，则客户需自行提供翻译服务。

• 未详细阅读和完全理解本维修手册之前，不得进行维修。

• 忽略本警告可能对维修服务人员、操作人员或患者造成电击、机械伤害或其他形

式的伤害。

(ZH-HK)

警告

本服務手冊僅提供英文版本。

• 倘若客戶的服務供應商需要英文以外之服務手冊，客戶有責任提供翻譯服務。

• 除非已參閱本服務手冊及明白其內容，否則切勿嘗試維修設備。

• 不遵從本警告或會令服務供應商、網絡供應商或病人受到觸電、機械性或其他的

危險。

(ZH-TW)

警告

本維修手冊僅有英文版。

• 若客戶的維修廠商需要英文版以外的語言，應由客戶自行提供翻譯服務。

• 請勿試圖維修本設備，除非您已查閱並瞭解本維修手冊。

• 若未留意本警告，可能導致維修廠商、操作員或病患因觸電、機械或其他危險而

受傷。

(HR)

UPOZORENJE

Ovaj servisni priručnik dostupan je na engleskom jeziku.

• Ako davatelj usluge klijenta treba neki drugi jezik, klijent je dužan osigurati prijevod.

• Ne pokušavajte servisirati opremu ako niste u potpunosti pročitali i razumjeli ovaj

servisni priručnik.

• Zanemarite li ovo upozorenje, može doći do ozljede davatelja usluge, operatera ili

pacijenta uslijed strujnog udara, mehaničkih ili drugih rizika.

(CS)

VÝSTRAHA

Tento provozní návod existuje pouze v anglickém jazyce.

•V případě, že externí služba zákazníkům potřebuje návod v jiném jazyce, je zajištění

překladu do odpovídajícího jazyka úkolem zákazníka.

• Nesnažte se o údržbu tohoto zařízení, aniž byste si přečetli tento provozní návod a

pochopili jeho obsah.

•V případě nedodržování této výstrahy může dojít k poranění pracovníka prodejního

servisu, obslužného personálu nebo pacientů vlivem elektrického proudu, respektive

vlivem mechanických či jiných rizik.

(DA)

ADVARSEL

Denne servicemanual findes kun på engelsk.

• Hvis en kundes tekniker har brug for et andet sprog end engelsk, er det kundens

ansvar at sørge for oversættelse.

• Forsøg ikke at servicere udstyret uden at læse og forstå denne servicemanual.

• Manglende overholdelse af denne advarsel kan medføre skade på grund af elektrisk

stød, mekanisk eller anden fare for teknikeren, operatøren eller patienten.

Important Safety Information

Warnings, Cautions, and Notes

Service Manual vii

(NL)

WAARSCHUWING

Deze onderhoudshandleiding is enkel in het Engels verkrijgbaar.

• Als het onderhoudspersoneel een andere taal vereist, dan is de klant

verantwoordelijk voor de vertaling ervan.

• Probeer de apparatuur niet te onderhouden alvorens deze onderhoudshandleiding

werd geraadpleegd en begrepen is.

• Indien deze waarschuwing niet wordt opgevolgd, zou het onderhoudspersoneel, de

operator of een patiënt gewond kunnen raken als gevolg van een elektrische schok,

mechanische of andere gevaren.

(ET)

HOIATUS

See teenindusjuhend on saadaval ainult inglise keeles

• Kui klienditeeninduse osutaja nõuab juhendit inglise keelest erinevas keeles,

vastutab klient tõlketeenuse osutamise eest.

• Ärge üritage seadmeid teenindada enne eelnevalt käesoleva teenindusjuhendiga

tutvumist ja sellest aru saamist.

• Käesoleva hoiatuse eiramine võib põhjustada teenuseosutaja, operaatori või

patsiendi vigastamist elektrilöögi, mehaanilise või muu ohu tagajärjel.

(FI)

VAROITUS

Tämä huolto-ohje on saatavilla vain englanniksi.

• Jos asiakkaan huoltohenkilöstö vaatii muuta kuin englanninkielistä materiaalia,

tarvittavan käännöksen hankkiminen on asiakkaan vastuulla.

• Älä yritä korjata laitteistoa ennen kuin olet varmasti lukenut ja ymmärtänyt tämän

huoltoohjeen.

• Mikäli tätä varoitusta ei noudateta, seurauksena voi olla huoltohenkilöstön,

laitteiston käyttäjän tai potilaan vahingoittuminen sähköiskun, mekaanisen vian tai

muun vaaratilanteen vuoksi.

(FR)

ATTENTION

Ce manuel d’installation et de maintenance est disponible uniquement en anglais.

• Si le technicien d’un client a besoin de ce manuel dans une langue autre que

l’anglais, il incombe au client de le faire traduire.

• Ne pas tenter d’intervenir sur les équipements tant que ce manuel d’installation et de

maintenance n’a pas été consulté et compris.

• Le non-respect de cet avertissement peut entraîner chez le technicien, l’opérateur ou

le patient des blessures dues à des dangers électriques, mécaniques ou autres.

(DE)

WARNUNG

Diese Serviceanleitung existiert nur in englischer Sprache.

• Falls ein fremder Kundendienst eine andere Sprache benötigt, ist es Aufgabe des

Kunden für eine entsprechende Übersetzung zu sorgen.

• Versuchen Sie nicht diese Anlage zu warten, ohne diese Serviceanleitung gelesen

und verstanden zu haben.

• Wird diese Warnung nicht beachtet, so kann es zu Verletzungen des

Kundendiensttechnikers, des Bedieners oder des Patienten durch Stromschläge,

mechanische oder sonstige Gefahren kommen.

Important Safety Information

Warnings, Cautions, and Notes

viii Service Manual

(EL)

ΠΡΟΕΙ∆ΟΠΟΙΗΣΗ

Το παρόν εγχειρίδιο σέρβις διατίθεται μόνο στα αγγλικά.

• Εάν ο τεχνικός σέρβις ενός πελάτη απαιτεί το παρόν εγχειρίδιο σε γλώσσα εκτός

των αγγλικών, αποτελεί ευθύνη του πελάτη να παρέχει τις υπηρεσίες μετάφρασης.

• Μην επιχειρήσετε την εκτέλεση εργασιών σέρβις στον εξοπλισμό αν δεν έχετε

συμβουλευτεί και κατανοήσει το παρόν εγχειρίδιο σέρβις

.

• Αν δεν προσέξετε την προειδοποίηση αυτή, ενδέχεται να προκληθεί τραυματισμός

στον τεχνικό σέρβις, στο χειριστή ή στον ασθενή από ηλεκτροπληξία, μηχανικούς ή

άλλους κινδύνους.

(HU)

FIGYELMEZTETÉS

Ezen karbantartási kézikönyv kizárólag angol nyelven érhető el.

• Ha a vevő szolgáltatója angoltól eltérő nyelvre tart igényt, akkor a vevő felelőssége a

fordítás elkészíttetése.

• Ne próbálja elkezdeni használni a berendezést, amíg a karbantartási kézikönyvben

leírtakat nem értelmezték.

• Ezen figyelmeztetés figyelmen kívül hagyása a szolgáltató, működtető vagy a beteg

áramütés, mechanikai vagy egyéb veszélyhelyzet miatti sérülését eredményezheti.

(ID)

PERINGATAN

Panduan servis hanya tersedia dalam Bahasa Inggris.

• Apabila suatu penyedia layanan servis pelanggan memerlukan bahasa selain

Bahasa Inggris, merupakan tanggung jawab pelanggan untuk menyediakan layanan

penerjemahan.

• Jangan mencoba melakukan servis peralatan kecuali apabila telah membaca dan

memahami panduan servis ini.

• Tidak mengindahkan peringatan ini dapat menyebabkan cedera pada pemberi

layanan servis, operator, maupun pasien akibat sengatan listrik, bahaya mekanik,

maupun bahaya lain.

(IS)

AÐVÖRUN

Þessi þjónustuhandbók er aðeins fáanleg á ensku.

• Ef að þjónustuveitandi viðskiptamanns þarfnast annas tungumáls en ensku, er það

skylda viðskiptamanns að skaffa tungumálaþjónustu.

• Reynið ekki að afgreiða tækið nema að þessi þjónustuhandbók hefur verið skoðuð og

skilin.

• Brot á sinna þessari aðvörun getur leitt til meiðsla á þjónustuveitanda, stjórnanda

eða sjúklings frá raflosti, vélrænu eða öðrum áhættum.

(IT)

AVVERTENZA

Il presente manuale di manutenzione è disponibile soltanto in lingua inglese.

• Se un addetto alla manutenzione richiede il manuale in una lingua diversa, il cliente è

tenuto a provvedere direttamente alla traduzione.

• Procedere alla manutenzione dell’apparecchiatura solo dopo aver consultato il

presente manuale ed averne compreso il contenuto.

• Il mancato rispetto della presente avvertenza potrebbe causare lesioni all’addetto

alla manutenzione, all’operatore o ai pazienti provocate da scosse elettriche, urti

meccanici o altri rischi.

Important Safety Information

Warnings, Cautions, and Notes

Service Manual ix

(JA)

警告

このサービスマニュアルには英語版しかありません。

• サービスを担当される業者が英語以外の言語を要求される場合、翻訳作業はそ

の業者の責任で行うものとさせていただきます。

• このサービスマニュアルを熟読し理解せずに、装置のサービスを行わないでく

ださい。

• この警告に従わない場合、サービスを担当される方、操作員あるいは患者さん

が、感電や機械的又はその他の危険により負傷する可能性があります。

(KO)

경고

본 서비스 매뉴얼은 영어로만 이용하실 수 있습니다 .

• 고객의 서비스 제공자가 영어 이외의 언어를 요구할 경우 , 번역 서비스를 제공하

는 것은 고객의 책임입니다 .

• 본 서비스 매뉴얼을 참조하여 숙지하지 않은 이상 해당 장비를 수리하려고 시도

하지 마십시오 .

• 본 경고 사항에 유의하지 않으면 전기 쇼크 , 기계적 위험 , 또는 기타 위험으로 인

해 서비스 제공자 , 사용자 또는 환자에게 부상을 입힐 수 있습니다 .

(LV)

BRĪDINĀJUMS

Šī apkopes rokasgrāmata ir pieejama tikai angļu valodā.

• Ja klienta apkopes sniedzējam nepieciešama informācija citā valodā, klienta

pienākums ir nodrošināt tulkojumu.

• Neveiciet aprīkojuma apkopi bez apkopes rokasgrāmatas izlasīšanas un saprašanas.

•Šī brīdinājuma neievērošanas rezultātā var rasties elektriskās strāvas trieciena,

mehānisku vai citu faktoru izraisītu traumu risks apkopes sniedzējam, operatoram

vai pacientam.

(LT)

ĮSPĖJIMAS

Šis eksploatavimo vadovas yra tik anglų kalba.

• Jei kliento paslaugų tiekėjas reikalauja vadovo kita kalba – ne anglų, suteikti vertimo

paslaugas privalo klientas.

•Nemėginkite atlikti įrangos techninės priežiūros, jei neperskaitėte ar nesupratote šio

eksploatavimo vadovo.

• Jei nepaisysite šio įspėjimo, galimi paslaugų tiekėjo, operatoriaus ar paciento

sužalojimai dėl elektros šoko, mechaninių ar kitų pavojų.

(NO)

ADVARSEL

Denne servicehåndboken finnes bare på engelsk.

• Hvis kundens serviceleverandør har bruk for et annet språk, er det kundens ansvar å

sørge for oversettelse.

• Ikke forsøk å reparere utstyret uten at denne servicehåndboken er lest og forstått.

• Manglende hensyn til denne advarselen kan føre til at serviceleverandøren,

operatøren eller pasienten skades på grunn av elektrisk støt, mekaniske eller andre

farer.

Important Safety Information

Warnings, Cautions, and Notes

x Service Manual

(PL)

OSTRZEŻENIE

Niniejszy podręcznik serwisowy dostępny jest jedynie w języku angielskim.

•Jeśli serwisant klienta wymaga języka innego niż angielski, zapewnienie usługi

tłumaczenia jest obowiązkiem klienta.

•Nie próbować serwisować urządzenia bez zapoznania się z niniejszym

podręcznikiem serwisowym i zrozumienia go.

• Niezastosowanie się do tego ostrzeżenia może doprowadzić do obrażeń serwisanta,

operatora lub pacjenta w wyniku porażenia prądem elektrycznym, zagrożenia

mechanicznego bądź innego.

(PT-BR)

AVISO

Este manual de assistência técnica encontra-se disponível unicamente em inglês.

• Se outro serviço de assistência técnica solicitar a tradução deste manual, caberá ao

cliente fornecer os serviços de tradução.

• Não tente reparar o equipamento sem ter consultado e compreendido este manual

de assistência técnica.

• A não observância deste aviso pode ocasionar ferimentos no técnico, operador ou

paciente decorrentes de choques elétricos, mecânicos ou outros.

(PT-PT)

ATENÇÃO

Este manual de assistência técnica só se encontra disponível em inglês.

• Se qualquer outro serviço de assistência técnica solicitar este manual noutro idioma,

é da responsabilidade do cliente fornecer os serviços de tradução.

• Não tente reparar o equipamento sem ter consultado e compreendido este manual

de assistência técnica.

• O não cumprimento deste aviso pode colocar em perigo a segurança do técnico, do

operador ou do paciente devido a choques eléctricos, mecânicos ou outros.

(RO)

ATENŢIE

Acest manual de service este disponibil doar în limba engleză.

•Dacă un furnizor de servicii pentru clienţi necesită o altă limbă decât cea engleză,

este de datoria clientului să furnizeze o traducere.

•Nu încercaţi să reparaţi echipamentul decât ulterior consultării şi înţelegerii acestui

manual de service.

• Ignorarea acestui avertisment ar putea duce la rănirea depanatorului, operatorului

sau pacientului în urma pericolelor de electrocutare, mecanice sau de altă natură.

(RU)

ОСТОРОЖНО!

Данное руководство по техническому обслуживанию представлено только на английском

языке.

• Если сервисному персоналу клиента необходимо руководство не на английском,

а на каком-то другом языке, клиенту следует самостоятельно обеспечить

перевод.

• Перед техническим обслуживанием оборудования обязательно обратитесь к

данному руководству и поймите изложенные в нем сведения.

• Несоблюдение требований данного предупреждения

может привести к тому, что

специалист по техобслуживанию, оператор или пациент получит удар

электрическим током, механическую травму или другое повреждение.

Page is loading ...

GE Panda User manual

This manual is also suitable for

GE Panda User manual

Related papers

Other documents