Troy-Bilt 11AA2M5766 Fast Start Guide

Type
Fast Start Guide

This manual is also suitable for

Troy-Bilt 11AA2M5766: Tame Your Lawn with Effortless Mowing

With its reliable engine and efficient cutting system, the Troy-Bilt 11AA2M5766 lawnmower is designed to make lawn care a breeze. Maneuver around obstacles and achieve a precise, even cut with its adjustable handle and durable steel blade. The included grass collector keeps your yard looking neat and tidy, while the quick-release levers allow for easy height adjustment. Experience effortless mowing and a manicured lawn with the Troy-Bilt 11AA2M5766.

Troy-Bilt 11AA2M5766: Tame Your Lawn with Effortless Mowing

With its reliable engine and efficient cutting system, the Troy-Bilt 11AA2M5766 lawnmower is designed to make lawn care a breeze. Maneuver around obstacles and achieve a precise, even cut with its adjustable handle and durable steel blade. The included grass collector keeps your yard looking neat and tidy, while the quick-release levers allow for easy height adjustment. Experience effortless mowing and a manicured lawn with the Troy-Bilt 11AA2M5766.

A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and slip
starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
778-13629© 2016 11-A/B2MX
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
A. Remove the wing nuts and carriage bolts
securing the upper handle to the lower
handle.
A
Pivot the upper handle
upward.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
A
B
C
D
Starter
Rope Handle
Blade Control Handle
Wing Nuts
B. Remove T-bolts from
the handle brackets.
Pull upward on the
handle until the holes
in lower handle line
up with the holes in
the handle bracket.
A
B
B
T-Bolt
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
A
B
1
4
2
5
3
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator’s Manual)
778-13629© 2016 11-A/B2MX
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
Oil Fill /
Dipstick
Gas Fill
A
B
Make sure the spark plug boot is connected to
the spark plug before attempting to start.
Spark Plug Boot
While standing behind the machine, pivot the Blade
Control Handle against the premium drive control.
Grasp the starter rope handle and pull with quick,
full-arm stroke. If the engine does not start after three
pulls, wait a few minutes and repeat.
6
8
7
9
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 11AA2M5766 Fast Start Guide

Type
Fast Start Guide
This manual is also suitable for

Troy-Bilt 11AA2M5766: Tame Your Lawn with Effortless Mowing

With its reliable engine and efficient cutting system, the Troy-Bilt 11AA2M5766 lawnmower is designed to make lawn care a breeze. Maneuver around obstacles and achieve a precise, even cut with its adjustable handle and durable steel blade. The included grass collector keeps your yard looking neat and tidy, while the quick-release levers allow for easy height adjustment. Experience effortless mowing and a manicured lawn with the Troy-Bilt 11AA2M5766.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI