Version 1.1
2
3
CAUTION!
Disconnect the ROBIN MiniMe from mains before remodelling it!
Instructions stated on the following pages describe remodelling the ROBIN MinMe to the ROBIN MiniMe DV.
The Facelift kit to MiniMe DV includes:
1 x Front cover of base*
1 x Rear cover of base*
2 x Arm cover assembled*
1 x Front cover of head*
1 x Rear cover of head*
(* Part numbers depend on colour variant of the Facelift kit)
1 x P/N 19010439 Base fan frame
1 x P/N 11016355 Base adaptor
2 x P/N 11016120 Coupling part
4 x P/N 17041551 Coupling part with M4
2 x P/N 17041549 Arm holder
1 x P/N 99015351 Front panel of head
1 x P/N 11016123 Head fan frame
4 x P/N 18010027 Round-head screw M3x20
2 x P/N 18010054 Round-head screw M3x10
16 x P/N 18010008 Round-head screw M3x8
-
6 x P/N 18010033 Countersunk-head screw M3x6
22 x P/N 18010035 Countersunk-head screw M4x8
12 x P/N 18010032 Countersunk-head screw M3x8
4 x P/N 18010063 Countersunk-head screw M4x12
10 x P/N 18020063 Selftapping screw 2.9x6.5 F
2 x P/N 18050009 Spring washer 3
2 x P/N 18050001 Washer 3
2 x P/N 18050064 Tooth lockwasher 3
2 x P/N 18050069 Tooth lockwasher 4
2 x P/N 18040005 Nut M3
4
1. Disassembly of original plastic covers from the head, arms and the
base
5
2. Disassembly of the original front panel of the head
6
3. Assembly of the new front panel of the head
Front panel of the head
(P/N 99015351)
2 x countersunk-head
screw M3x8
2 x countersunk-head
screw M4x8
2 x countersunk-head
screw M3x8
2 x countersunk-head screw
M3x6 with tooth lockwasher 3
7
4. Disassembly of the original fan frame and assembly the new one
2 x round-head screw
M3 x 20 with spring washer
3 and nut M3
Head fan frame
(P/N 11016123)
2 x round-head
screw M3 x 20
8
5. Assembly of new arm holders
4 x countersunk-head
screw M4x8
4 x countersunk-head
screw M4x8
Arm holder
(P/N 17041549)
Arm holder
(P/N 17041549)
9
6. Assembly of the base adaptor (with attaching point for a safety wire).
Unscrew 2 x countersunk-head
screw M4x10 + washer
Unscrew 2 x countersunk-head (hex
socket) screw M4x10 + washer
2 x countersunk-head
screw M4x12 + tooth lockwasher 4
2 x countersunk-head
screw M4x12 +
tooth lockwasher 4
Attachment point
for safety wire
Base adaptor
(P/N 11016355)
10
7. Assembly of the base fan frame
2 x round-head screw
M3 x 10 with washer 3.
Unscrew 2 x
countersunk-head
screw M3x8 (which hold fan)
Base fan frame
(P/N 19010439)
11
8. Assembly of new base covers
10 x selftapping screw
2.9x6.5 F
Rear cover of base
Front cover of base
12
9. Assembly of new head covers
2 x round head screw M3 x 8
2 x Coupling part
with M3 thread
P/N 17041551-01
12 x round-head screw
M3 x 8
rear cover of head
Rear cover of base
2 x Coupling part
with M3 thread
P/N 17041551-01
2 x round head screw M3 x 8
13
10. Assembly of new arm covers
2 x Coupling part
P/N 11016120
2 x countersunk-head
screw M3x6
2 x Coupling part
P/N 11016120
2 x countersunk-head
screw M3x6
4 x countersunk-head
screw M4x8
Arm cover
2 x countersunk-head
screw M3x6
Arm cover
4 x countersunk-head
screw M4x8
September 27, 2018
Copyright © 2018 Robe Lighting - All rights reserved
All Specications subject to change without notice
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
14
/
