2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Lawnmowers
  6. Toro
  7. E-Z Vac Complete Twin Bagger, TITAN Zero-Turn-Radius Riding Mower
E-Z Vac Complete Twin Bagger, TITAN Zero-Turn-Radius Riding Mower

Toro E-Z Vac Complete Twin Bagger, TITAN Zero-Turn-Radius Riding Mower User manual

  • Hello! I am an AI chatbot trained to assist you with the Toro E-Z Vac Complete Twin Bagger, TITAN Zero-Turn-Radius Riding Mower User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3436-949RevA
E-ZVac
™
CompleteTwinBagger
TITAN
®
Zero-Turn-RadiusRidingMower
ModelNo.79346—SerialNo.400000000andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3436-949*A
WARNING
CALIFORNIA
Proposition65Warning
Useofthisproductmaycauseexposure
tochemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Introduction
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoid
injuryandproductdamage.Youareresponsiblefor
operatingtheproductproperlyandsafely.
Visitwww.Toro.comforproductsafetyandoperation
trainingmaterials,accessoryinformation,helpnding
adealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineT oroparts,or
additionalinformation,contactanAuthorizedService
DealerorT oroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Figure1
identiesthelocationofthemodelandserialnumbers
ontheproduct.Writethenumbersinthespace
provided.
g005673
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafety-alertsymbol
(Figure2),whichsignalsahazardthatmaycause
seriousinjuryordeathifyoudonotfollowthe
recommendedprecautions.
g000502
Figure2
1.Safety-alertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Safety.......................................................................3
TowingSafety.....................................................3
SafetyandInstructionalDecals..........................4
Setup........................................................................5
1PreparingtheMachine.....................................6
2InstallingtheWeight.........................................6
3RemovingtheGrassDeectorandBelt
Cover..............................................................7
4InstallingtheBafeandBlower
Support...........................................................8
5InstallingthePulleyAssembly,BeltCover,
andShoulderBolt..........................................10
6InstallingtheAttachmentMount.....................10
7InstallingtheLatchRod..................................12
8AssemblingtheBaggerTop...........................13
9InstallingtheBaggerT op................................14
10InstallingtheBlowerAssembly.....................14
11InstallingtheBlowerBeltandPowered
BaggerCover................................................16
12InstallingtheDischargeTubes.....................17
Operation................................................................19
EmptyingtheGrassBags.................................20
ClearingObstructionsfromtheBagger.............21
RemovingtheBagger.......................................21
OperatingTips.................................................22
Maintenance...........................................................23
RecommendedMaintenanceSchedule(s)...........23
PreparingforMaintenance...............................23
CleaningtheHoodScreen................................23
CleaningtheBaggerandBags.........................24
InspectingtheBlowerBelt................................24
ReplacingtheBlowerBelt.................................24
InspectingtheBagger.......................................24
InspectingtheMowerBlades............................24
Storage...................................................................25
StoringtheBaggerAttachment.........................25
Troubleshooting......................................................26
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA
AllRightsReserved
Safety
•Becomefamiliarwiththesafeoperationofthe
equipment,withtheoperatorcontrols,andsafety
signs.
•Useextracarewithgrasscatchersorother
attachments.Thesecanchangetheoperating
characteristicsandthestabilityofthemachine.
•Followthemanufacturer'srecommendations
foraddingorremovingwheelweightsor
counterweightstoimprovestability.
•Donotuseagrasscatcheronsteepslopes.A
heavygrasscatchercouldcauselossofcontrol
oroverturnthemachine.
•Slowdownanduseextracareonhillsides.Be
suretotravelintherecommendeddirectionon
hillsides.Turfconditionscanaffectthestabilityof
themachine.Useextremecautionwhileoperating
neardrop-offs.
•Keepallmovementonslopesslowandgradual.
Donotmakesuddenchangesinspeed,direction,
orturning.
•Thegrasscatchercanobstructtheviewtothe
rear.Useextracarewhenoperatinginreverse.
•Usecarewhenloadingorunloadingthemachine
intoatrailerortruck.
•Neveroperatewiththedischargedeectorraised,
removedoraltered,unlessusingagrasscatcher.
•Keephandsandfeetawayfrommovingparts.Do
notmakeadjustmentswiththeenginerunning.
•Parkthemachineonlevelground,disengage
thedrives,chockthewheels,andshutoffthe
enginebeforeleavingtheoperator'spositionfor
anyreasonincludingemptyingthegrasscatcher
oruncloggingthechute.
•Ifyouremovethegrasscatcher,besuretoinstall
anydischargedeectororguardthatmighthave
beenremovedtoinstallthegrasscatcher.Donot
operatethemowerwithouteithertheentiregrass
catcherorthegrassdeectorinplace.
•Shutofftheenginebeforeremovingthegrass
catcheroruncloggingthechute.
•Donotleavegrassinthegrasscatcherfor
extendedperiodsoftime.
•Grasscatchercomponentsaresubjecttowear,
damageanddeterioration,whichcouldexpose
youtomovingpartsorallowobjectstobethrown.
Frequentlycheckcomponentsandreplacewith
themanufacturer'srecommendedparts,when
necessary.
TowingSafety
•Donotattachtowedequipmentexceptatthehitch
point.
•Followtheattachmentmanufacturer's
recommendationforweightlimitsfortowed
equipmentandtowingonslopes.
•Neverallowchildrenorothersinorontowed
equipment.
•Onslopes,theweightofthetowedequipmentmay
causelossoftractionandlossofcontrol.Reduce
towedweightandslowdown.
•Stoppingdistanceincreaseswiththeweightofthe
towedload.Travelslowlyandallowextradistance
tostop.
•Makewideturnstokeeptheattachmentclearof
themachine.
•Donottowaloadthatweighsmorethanthe
towingmachine.
3
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea
ofpotentialdanger.Replaceanydecalthatisdamagedormissing.
decal136-4164
136-4164
1.Warning—readtheOperator’sManual.4.Cutting/dismembermenthazard,impeller—keepawayfrom
movingparts;keepallguardsandcoversinplace.
2.Warning—hearingprotectionmustbeworn.
5.Cutting/dismembermenthazard,impeller—disengagethe
PTO,removethekey,andwaitforallmovingpartstostop.
3.Thrownobjecthazard—donotoperatetheblowerwithoutthe
entiresysteminstalledandlatched.
6.Warning;lossoftraction—donotoperatewithonly
counterbalanceweightsinstalled;donotoperatewithonly
E-ZVacinstalled;operateonlywithbothE-ZVacand
counterbalanceweightsinstalled.
decal109-6809
109-6809
1.Crushinghazardofhand—donotremovethewholebaggerfromthemachine;openthebaggertopandthenremovethebag(s)
fromthebagger.Donotremovethebaggertopwhenitisclosed;openthebaggertopandthenremoveit.
decal133-8061
133-8061
4
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
Weighttray1
Leftweight-traymount
1
Rightweight-traymount1
Suitcaseweight—16kg(35lb)
1
Retainingrod1
Bolt(3/8x1-1/4inches)
2
Flangenut(3/8inch)
4
Carriagebolt(3/8x1inch)
2
2
Self-tappingbolt(5/16x3/4inch)
2
Installtheweight.
3
Nopartsrequired
–
Removethegrassdeectorandbelt
cover.
Blowersupport1
Hexwasher-headscrew(3/8x3/4inch)
2
Bafe
1
Carriagebolt(5/16x3/4inch)
4
4
Flangenut(5/16inch)
4
Installthebafeandblowersupport.
Pulleyassembly1
5
Beltcover1
Installthepulleyassemblyandbelt
cover.
Stabilizerbracket
1
Carriagebolt(5/16x3/4inch)
2
Locknut(5/16inch)
4
Self-tappingscrew(5/16x3/4inch)
2
Bolt(5/16x1inch)
2
Pivotframe
1
Hairpincotter2
Rod2
6
Washer2
Installtheattachmentmount.
Latchrod1
7
Hairpincotter1
Installthelatchrod.
Baggertop1
Baggerscreen1
8
Hairpincotter2
Assemblethebaggertop.
9
GrassBag
2Installthebaggertop.
10
Blowerassembly1Installtheblowerassembly.
Poweredbaggercover1
11
Blowerbelt1
Installtheblowerbeltandpowered
baggercover.
Uppertube1
Screw(1/4x3/4inches)
2
Washer(1/4inch)
2
Locknut(1/4inch)
2
12
Lowertube1
Installthedischargetubes.
5
Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
PreparingtheMachine
NoPartsRequired
Procedure
Performthefollowingproceduretopreparethe
machineforattachingtheblowerandnishingkit.
1.Parkthemachineonalevelsurface.
2.Disengagetheblade-controlswitch,engage
theparkingbrake,andmovethemotion-control
leversoutwardtotheNEUTRAL-LOCKposition.
3.Shutofftheengineandremovethekey.
4.Ensurethatthemachineissecurefrom
movementbeforeyoubegintoworkonit.
5.Repairallbentordamagedareasofmachine
deckandreplaceanymissingparts.
6.Cleanthemachineofanydebrisonthemachine
deckorrearpartofthemachinetoease
installation.
2
InstallingtheWeight
Partsneededforthisprocedure:
1Weighttray
1
Leftweight-traymount
1Rightweight-traymount
1
Suitcaseweight—16kg(35lb)
1Retainingrod
2
Bolt(3/8x1-1/4inches)
4
Flangenut(3/8inch)
2
Carriagebolt(3/8x1inch)
2
Self-tappingbolt(5/16x3/4inch)
Procedure
CAUTION
Thebaggerchangestheweightdistributionof
themachine.Operatingthemachinewithout
thefrontweightsmaycauseanunstable
condition,whichcouldresultinalossof
control.
Ensurethatthefrontweightsareproperly
installedbeforeoperatingthemachinewith
thebaggerattachment.
1.Removetheexistingboltandnutfromtheleft
andrightsideoftheplatformwhereyouwill
installtheweight-traymounts.
2.Usethe2self-tappingbolts(5/16x3/4inch),2
bolts(3/8x1-1/4inches),andangenuts(3/8
inch)tosecuretheleftandrightweight-tray
mountstothemachine(Figure3).
6
g196533
Figure3
Cutawayview
1.Weight-traymounts
3.Flangenut(3/8inch)
2.Bolt(3/8x1-1/4inches)4.Self-tappingbolt(5/16x
3/4inch)
3.Usethe2carriagebolts(3/8x1inch)andange
nutstosecuretheweighttraytothemounts
(Figure4).
g196549
Figure4
1.Carriagebolt(3/8x1inch)
3.Weighttray
2.Weight-traymount
4.Flangenut(3/8inch)
4.Insertthesuitcaseweightintotheweighttray
withthegroovesidefacingtowardthefrontof
themachine(Figure5).
g196560
Figure5
1.Retainingrod
3.Suitcaseweight
2.Weighttray
5.Inserttheretainingrodintothetrayandrotateit
intothelockedposition(Figure5).
Important:Removethesuitcaseweightwhenever
youremovethebaggerattachment.
3
RemovingtheGrass
DeectorandBeltCover
NoPartsRequired
Procedure
WARNING
Anuncovereddischargeopeningcouldallow
themachinetothrowobjectstowardyouor
bystandersandresultinseriousinjury.Also,
contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyou
installamulchplate,dischargedeector,or
grass-collectionsystem.
Inspectthegrassdeectorfordamagebeforeeach
use.Replaceanydamagedpartsbeforeuse.
1.Disengagethespringfromthenotchinthe
deectorbracketandremovethecotterpin(CE
modelsonly),slidetherodoutofthewelded
deckbrackets,spring,anddischargedeector
(Figure6).
7
Note:Yourchutemaylookdifferentthanthe
onepictured.
g190642
Figure6
1.Rod
4.Spring
2.Cotterpin(CEmodels
only)
5.Deckbrackets
3.Deector6.Springinstalledoverthe
rod
2.Removethedeector(Figure6).
3.Removethe4screws(1/4x1/2inch)securing
therightbeltcover,andremovethebeltcover
(Figure7).
Note:Retainthe4screws(1/4x1/2inch)for
installationinProcedure5InstallingthePulley
Assembly,BeltCover,andShoulderBolt(page
10).
g200974
Figure7
1.Screw(1/4x1/2inch)
2.Beltcover
4
InstallingtheBafeand
BlowerSupport
Partsneededforthisprocedure:
1Blowersupport
2
Hexwasher-headscrew(3/8x3/4inch)
1
Bafe
4
Carriagebolt(5/16x3/4inch)
4
Flangenut(5/16inch)
Procedure
1.Installtheblowersupporttothemowerdeck
using2hexwasher-headscrews(3/8x3/4inch)
asshowninFigure8.
g201299
Figure8
1.Hexwasher-headscrew
(3/8x3/4inch)
2.Blowersupport
8
2.Removetheexistingboltandnutfromthe
mowerdeck(Figure9).
Important:For48-inchand60-inchmower
decks,thereisonlyoneboltandnutthatyou
canremove.
For54-inchmowerdeck,removetheboltand
nutasshowninFigure9.
g206498
Figure9
1.Existingbolt2.Existingnut
3.Installtheleftsideofthebafeusingacarriage
bolt(5/16x3/4inch)andangenut(5/16inch)
asshowninFigure10.
4.Loosenthe2carriagebolts(5/16x3/4inch)in
thebafeslots,andslidethebafeuntilthehole
alignswiththeholeinthemowerdeck(Figure
10).
5.InstallbafeasshowninFigure10.
Important:Ensurethatyouusethecorrect
holeforthebafe;refertoFigure10.
6.Tightenthe2carriagebolts(5/16x3/4inch)in
thebafeslots(Figure10).
g206496
Figure10
54-inchmowerdeckshown
1.Innerbafe
6.Installthiscarriagebolt
(5/16x3/4inch)and
angenut(5/16inch)after
slidingthebafe.
2.Holefor48-inchand
60-inchmowerdeck
installation.
7.Slotsinthebafe
3.Holefor54-inchmower
deckinstallation.
8.Loosenthese2carriage
bolts(5/16x3/4inch)and
2angenut(5/16inch).
4.Rightblade9.Installthiscarriagebolt
(5/16x3/4inch)and
angenut(5/16inch)rst.
5.Outerbafe
9
5
InstallingthePulley
Assembly,BeltCover,
andShoulderBolt
Partsneededforthisprocedure:
1Pulleyassembly
1Beltcover
Procedure
1.Removethenutandwasherfromtheright
mowerdeckpulley.
2.Installthepulleyassemblytotherightmower
deckpulleywiththepreviouslyremovednutand
washer(Figure11).
Important:For48-inchmowerdecks,use
thesmallblowerpulley.
For54-inchand60-inchmowerdecks,use
thelargeblowerpulley.
3.Torquethenutto136to149N∙m(100to110
ft-lb).
g201880
Figure11
54-inchmowerdeckshown
1.Existingpulleynut
4.Existingdeck(spindle)
pulley
2.Existingwasher
5.Spindle
3.Blowerpulley
4.Installthenewbeltcoveroverthepulley
assemblyusingthe4previouslyremoved
screws(1/4x1/2inch)asshowninFigure12.
g201435
Figure12
1.Beltcover
2.Screw(1/4x1/2inch)
6
InstallingtheAttachment
Mount
Partsneededforthisprocedure:
1
Stabilizerbracket
2
Carriagebolt(5/16x3/4inch)
4
Locknut(5/16inch)
2
Self-tappingscrew(5/16x3/4inch)
2
Bolt(5/16x1inch)
1
Pivotframe
2Hairpincotter
2Rod
2Washer
Procedure
1.Removetheexisting2bolts,2nuts,andhitch
bracketfromthebottomoftheengineguard
(Figure13).
10
g308798
Figure13
1.Nut3.Bolt
2.Existinghitchbracket
2.Installthestabilizerbrackettotheengineguard
using2carriagebolts(5/16x3/4inch)and2
locknuts(5/16inch)asshowninFigure14.
g308799
Figure14
1.Locknut(5/16inch)2.Carriagebolt(5/16x3/4
inch)
3.Removetheexisting2self-tappingscrewsfrom
thebottomofthemachineframe(Figure16).
4.Looselyinstallthepivotframetothemachine
frameusing2bolts(5/16x1inch)and2locknuts
(5/16inch)asshowninFigure15.
g302477
Figure15
1.Locknut(5/16inch)2.Bolt(5/16x1inch)
5.Positionthepivotframeupward,andsecurethe
pivotframetothebottomofthemachineframe
using2self-tappingscrews(5/16x3/4inch)as
showninFigure16.
g308797
Figure16
1.Self-tappingscrew(5/16x
3/4inch)
2.Pivotframe
6.Tightenthe2bolts(5/16x1inch)and2locknuts
(5/16inch)asshowninFigure15.
7.Installthebent,aredendofarodintothekeyed
slotintheleftsideofthemachineframe,and
movetherodrearwardtoseatitintheframe
(Figure17).
Note:Repeatthisstepfortherightsideofthe
machine.
11
g308335
Figure17
Leftsideshown
8.Insertthebentendsoftherodsintothe
attachmentmountasshowninFigure17and
securetheendofeachrodwithawasherand
hairpincotter.
7
InstallingtheLatchRod
Partsneededforthisprocedure:
1Latchrod
1Hairpincotter
Procedure
Installthelatchrodwithahairpincotter(Figure18).
g201213
Figure18
1.Hairpincotter2.Latchrod
12
8
AssemblingtheBaggerTop
Partsneededforthisprocedure:
1Baggertop
1Baggerscreen
2Hairpincotter
Procedure
1.Turnthebaggertopover.
2.InstallthescreenasshowninFigure19and
ensurethatitslopesdowntowardthecollection
bags.
Note:Makesurethatthescreenssnapinto
placeandthetabsengagethebaggertop.
g201881
Figure19
1.Baggertop
4.Slotinbaggertop
2.Screen
5.Hairpincotter
3.Screentab
13
9
InstallingtheBaggerTop
Partsneededforthisprocedure:
2
GrassBag
Procedure
1.Installthebaggertoptothebaggerframe.
Note:Yourbaggermaylookdifferentthanthe
oneshown.
2.Slidethebracketsoverthepostsinthebagger
frameandinstallthecircularcotterpinintothe
holeintherighthandpost(Figure20).
3.Rotatethebaggerhooddowntotheoperating
position.
Note:Toremovethecircularcotterpin,
continuetorotateitinthesamedirectionas
installed.
g016265
Figure20
1.Baggerhood
4.Circularcotterpin
2.Baggerframe
5.Post
3.Bracket,baggerhood
4.Liftthebaggertopandinstallthebagsbysliding
thebagframehooksontotheretainingbrackets
(Figure21).
g300378
Figure21
5.Lowerthebaggertopontothebags(Figure22).
g033030
Figure22
6.Securethehoodwiththelatch(Figure22).
14
10
InstallingtheBlower
Assembly
Partsneededforthisprocedure:
1Blowerassembly
Procedure
WARNING
Anuncovereddischargeopeningallowsthe
lawnmowertothrowobjectstowardyouor
bystanders,resultinginseriousinjury.Also,
contactwiththebladecouldoccur.
•Neveroperatethelawnmowerwithouta
coverplate,amulchplate,oragrasschute
andcatcher.
•Makesurethatthegrassdeectoris
installedwhenyouremovethegrasschute
andcatcher.
Important:Installtheside-dischargechutewhen
youremovethebaggerandblower.
Important:Saveallthehardwareandthe
side-dischargechute.
1.Ifnecessary,installthebeltontotheblower
pulley(Figure25).
2.Inserttheblowerpivotpinintotheblower
supportandrotatetheblowerassemblyinward
towardthemachine(Figure23).
Note:Theblowerassemblyshould
automaticallylatchasshowninFigure24.
g201514
Figure23
1.Blowerassembly3.Blowersupport
2.Blowerpivotpin
g201893
Figure24
1.Blowerlatch
15
11
InstallingtheBlowerBelt
andPoweredBaggerCover
Partsneededforthisprocedure:
1Poweredbaggercover
1Blowerbelt
Procedure
1.Installthebeltaroundtheblowerpulley(Figure
25andFigure26);referto10Installingthe
BlowerAssembly(page14).
Usethefollowingbeltbasedonthemower
decksize:
48-inchMower
Deck
54-inchMower
Deck
60-inchMower
Deck
ToroPartNo.
127-0074
ToroPartNo.
127-0075
ToroPartNo.
127-0076
g201516
Figure25
BlowerBeltRouting
1.Idler/tensionpulley
3.Blowerbelt
2.Blowerpulley4.Drivepulley
g201513
Figure26
1.Blowerpulley5.Idlerarm
2.Blowerinposition(housing
portionremovedfor
illustrativepurposes)
6.Drivepulley
3.Spring7.Idler/tensionpulley
4.Idler-pulleypost8.Blowerbelt
2.Ensurethatthebeltremainsalignedtothe
blowerpulleywhileyouareinstallingtheblower
assembly.
3.Pullthespringloadedidlerpulleyawayfromthe
xedspringpost,androutethebeltaroundthe
mowerdeckpulley(Figure26).
Note:Ensurethatthebeltisroutedaroundthe
blowerpulleycorrectly.
4.Routethebeltaroundthedrivepulleyas
illustratedinFigure25andFigure26.
5.Installthepoweredbaggercoveroverthebelt
cover,andsecureitbytighteningtheknob
(Figure27).
16
g201515
Figure27
1.Knob3.Beltcover
2.Poweredbaggercover
12
InstallingtheDischarge
Tubes
Partsneededforthisprocedure:
1Uppertube
2
Screw(1/4x3/4inches)
2
Washer(1/4inch)
2
Locknut(1/4inch)
1Lowertube
Procedure
Important:Makesurethatthemowerdeckisin
thelowestheight-of-cutpositionbeforeinstalling
thedischargetubes.
Note:Remembertoinstallthegrassdeectorwhen
youremovethebaggerfromthemower.
1.DisengagethePTOandengagetheparking
brake.
2.Shutofftheengineandremovethekey.
3.Lowerthemowerdecktothelowestheight-of-cut
position.
4.Removethebagsforviewingthetubeunder
thehood.
5.Lowerandlatchthehood.
6.Usebothlatchestoattachthelowertubetothe
blowerassembly(Figure28).
Note:Ensurethatthenotchinthelowertubeis
atthebottomwheninstalled(Figure30).
g018444
Figure28
LowerDischargeTubeLatch
1.Blowerassembly3.Latch
2.Upperlatch
7.Makenoteofwherethe2boltsintheuppertube
areinstalled.
Note:Theholenearthemoldedarrowheads
willnotbeused.
8.Removethe2boltsinthelowerendoftheupper
tube.
9.Usethe2holesasatemplateforthelowertube.
Note:Retainthehardware.
10.Inserttheupperend(noholes)oftheuppertube
throughthetubesealinthehoodbypushing
thetubeinuntilthetubecontactstheinsideof
thehood.
11.Pulltheuppertubeoutslightlysothattheseal
extendsoutwardandoverthelowertube(Figure
29).
17
g018440
Figure29
1.Uppertube3.Baggerhood
2.Rubbersealprotrudingout
12.Aligntheuppertubeholestomatchthedimples
onthesurfaceofthelowertube.
Note:Ensurethatthesideproleappearsas
showninFigure30.
Note:Donotusetheopenholenearthe
moldedarrowheads.
g020776
Figure30
1.Uppertube
3.Notchatthebottomofthe
tubewheninstalled
2.Existinghole(bolt
removed)
4.Lowertube
13.Usingtheexistingholesintheuppertubeas
atemplate,drill2holes,6.5mm(1/4inch)
diameter,throughthedimplesonthelowertube
(Figure31).
g018439
Figure31
DrillingLowerDischargeTube
1.Dimples4.Uppertube
2.Lowertube
5.Installscrew(1/4x3/4
inch),washer(1/4inch),
andlocknut(1/4inch)
here.
3.Drill6.5mm(1/4inch)
diameterhole
6.Uppertube—existing
holes
14.Removetheupperandlowertubesfromthe
machine.
15.Slidethetubestogetherandaligntheholes.
16.Installthewashers(1/4inch)ontothebolts
(Figure31).
17.Usingahexkeytool,installthescrews(1/4x
3/4inch)andwashers(1/4inch)fromtheinside
ofthelowertubeandthroughtheexistingholes
intheuppertube(Figure31).
18
18.Securethetubestogetherwiththenuts(1/4
inch)asshowninFigure31.
19.Inserttheupperdischargetubethroughthetube
sealinthehood.
20.Pulltheuppertubeoutslightlysothattheseal
extendsoutwardandovertheblowerassembly
(Figure29).
21.Usebothlatchestoattachthelowertubetothe
blowerassembly(Figure28).
Operation
WARNING
Toavoidpersonalinjury,followthese
procedures:
•Becomefamiliarwithalloperatingand
safetyinstructionsintheOperator's
Manualforthemowerbeforeusingthis
attachment.
•Neverremovethedischargetube,bags,
baggertop,orthechutewhiletheengine
isrunning.
•Alwaysshuttheengineoffandwaitforall
movingpartstostopbeforeclearingan
obstructionfromthebaggingsystem.
•Neverperformmaintenanceormake
repairswhiletheengineisrunning.
WARNING
Withoutthegrassdeector,baggertubesor
completebaggerassemblymountedinplace,
youandothersareexposedtobladecontact
andthrowndebris.Contactwiththerotating
mowerblade(s)andthrowndebriswillcause
injuryordeath.
•Alwaysinstallthegrassdeectorwhen
removingthebaggerandchangingtoside
dischargemode.
•Ifthegrassdeectoriseverdamaged,
replaceitimmediately.Thegrassdeector
routesmaterialdowntowardtheturf.
•Neverputyourhandsorfeetunderthe
mower.
•Nevertrytoclearthedischargeareaor
mowerbladesunlessyoumovethepower
takeoff(PTO)tooffandrotatetheignition
keytooff.Alsoremovethekeyandpull
thewireoffofthesparkplug(s).
•Turnofftheenginebeforeuncloggingthe
dischargechute.
19
EmptyingtheGrassBags
DANGER
Debris,suchasleaves,grass,orbrushcan
catchre.Areintheengineareacancause
personalinjuryandpropertydamage.
•Keeptheengineandmuferareafreeof
debrisaccumulation.
•Takecarewhenopeningthebaggercover
tokeepdebrisfromfallingontotheengine
andmuferarea.
•Allowthemachinetocoolbeforestoringit.
Becarefulwhenliftingorhandlingagrassbagthatis
full.T oemptythegrassbags:
1.Parkthemachineonalevelsurfaceand
disengagethebladecontrolswitch.
2.Movethemotioncontrolleversoutwardto
theneutrallockposition,shutofftheengine,
removethekey,settheparkingbrakeandwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Open(raise)thebaggertop(Figure32).
g005758
Figure32
4.Compressdebrisintothebags.Withboth
hands,liftuponthebagandunhookitfromthe
retainingbracket.Emptythebag.Repeatthe
procedurefortheotherbag.
g300218
Figure33
g300217
Figure34
5.Installthebagsbyslidingthebagframehooks
ontotheretainingbrackets.
6.Lowerthebaggertopontothebags.
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/