2. Rev-A-Shelf
  3. CVRI Series

Rev-A-Shelf CVRI Series Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Rev-A-Shelf CVRI Series Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
I-CVRI-0417
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
CVRI SERIES WITHOUT DRILL GUIDE
TOOLS REQUIRED:
10 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
1/2”
1. Using a 1/2” drill bit drill
a hole at least 7” deep
2. Insert valet rod
NOTE: BEFORE YOU INSERT
VALET ROD REMOVE EXCESS
SAWDUST
3/4” .75” OR THICKER BOARD RECOMMENDED
Note: It is highly recommended
to use Rev-A-Shelf’s drill bit and
guide for accurate installation,
see other side for details.
(CVRI-DG, Sold Seperately)
I-CVRI-0417
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
CVRI SERIES WITH DRILL GUIDE
TOOLS REQUIRED:
5 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
1/2”
1. Clamp drill guide to
desired location and tighten
2. Drill to at least 7” deep
3. Firmly press the valet rod
into place
3/4” (.75”) or thicker board recommended
NOTE: BEFORE YOU INSERT VALET ROD
REMOVE EXCESS SAWDUST
/