Gigabyte GA-Z87X-SLI User manual

GA-Z87X-SLI

User's Manual

Rev. 1102

12ME-Z87XSLI-1102R

Motherboard

GA-Z87X-SLI

Oct. 15, 2013

Motherboard

GA-Z87X-SLI

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in

any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of docu-

mentations:



For quick set-up of the product, read the Quick Installation Guide included with the product.



For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 4 -

Table of Contents

Box Contents ...................................................................................................................6

Optional Items .................................................................................................................6

GA-Z87X-SLI Motherboard Layout .................................................................................7

GA-Z87X-SLI Motherboard Block Diagram ....................................................................8

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions ................................................................................... 9

1-2 ProductSpecications ................................................................................... 10

1-3 Installing the CPU and CPU Cooler............................................................... 13

1-3-1 Installing the CPU ..................................................................................................13

1-3-2 Installing the CPU Cooler ......................................................................................15

1-4 Installing the Memory .................................................................................... 16

1-4-1 DualChannelMemoryConguration ....................................................................16

1-4-2 Installing a Memory ................................................................................................17

1-5 Installing an Expansion Card ......................................................................... 18

1-6 Setting up AMD CrossFire

™

/NVIDIA

®

SLI

™

Conguration ............................. 19

1-7 Back Panel Connectors ................................................................................. 20

1-8 Internal Connectors ....................................................................................... 22

Chapter 2 BIOS Setup .................................................................................................. 31

2-1 Startup Screen ............................................................................................... 32

2-2 The Main Menu .............................................................................................. 33

2-3 M.I.T. .............................................................................................................. 35

2-4 System Information ........................................................................................ 45

2-5 BIOS Features ............................................................................................... 46

2-6 Peripherals ..................................................................................................... 50

2-7 Power Management ....................................................................................... 54

2-8 Save & Exit .................................................................................................... 56

Chapter 3 ConguringSATAHardDrive(s) ..................................................................57

3-1 ConguringSATAControllers ........................................................................ 57

3-2 Installing the SATA RAID/AHCI Driver and Operating System ..................... 69

- 5 -

Chapter 4 Drivers Installation .......................................................................................73

4-1 Chipset Drivers .............................................................................................. 73

4-2 Application Software ...................................................................................... 74

4-3 Information ..................................................................................................... 74

Chapter 5 Unique Features...........................................................................................75

5-1 BIOS Update Utilities ..................................................................................... 75

5-1-1 Updating the BIOS with the Q-Flash Utility ...........................................................75

5-1-2 Updating the BIOS with the @BIOS Utility ............................................................78

5-2 APP Center .................................................................................................... 79

5-2-1 EasyTune ............................................................................................................... 80

5-2-2 EZ Setup ................................................................................................................81

5-2-3 USB Blocker .......................................................................................................... 86

5-2-4 Smart TimeLock .....................................................................................................87

5-2-5 Smart Recovery 2 ................................................................................................. 88

Chapter 6 Appendix ......................................................................................................91

6-1 ConguringAudioInputandOutput .............................................................. 91

6-1-1 Conguring2/4/5.1/7.1-ChannelAudio ..................................................................91

6-1-2 ConguringS/PDIFIn/Out .....................................................................................93

6-1-3 ConguringMicrophoneRecording ...................................................................... 94

6-1-4 Using the Sound Recorder ....................................................................................97

6-2 Troubleshooting .............................................................................................98

6-2-1 Frequently Asked Questions................................................................................. 98

6-2-2 Troubleshooting Procedure .................................................................................. 99

Regulatory Statements ........................................................................................... 101

Contact Us .............................................................................................................. 103

- 6 -

Box Contents

5

GA-Z87X-SLI motherboard

5

Motherboard driver disk

5

User's Manual

5

Quick Installation Guide

5

Four SATA cables

5

I/O Shield

5

One 2-Way SLI bridge connector

Optional Items



2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)



eSATAbracket(PartNo.12CF1-3SATPW-4*R)



3.5"FrontPanelwith2USB3.0/2.0ports(PartNo.12CR1-FPX582-2*R)



COMportcable(PartNo.12CF1-1CM001-3*R)



LPTportcable(PartNo.12CF1-1LP001-0*R)



S/PDIFIncable(PartNo.12CR1-1SPDIN-1*R)



HDMI-to-DVIadapter(PartNo.12CT2-HDMI01-1*R)

The box contents above are for reference only and the actual items shall depend on the product package you

obtain. The box contents are subject to change without notice.

- 7 -

GA-Z87X-SLI Motherboard Layout

F_USB30

KB_MS_USB

CPU_FAN

LGA1150

ATX

AUDIO

DDR3_4

DDR3_2

DDR3_3

DDR3_1

BAT

ATX_12V_2X4

Intel

®

Z87

CODEC

CLR_CMOS

M_BIOS

B_BIOS

VGA

DVI

USB30

LAN

PCIEX16

PCIEX1_3

PCIEX8

PCI1

PCI2

PCIEX1_2

PCIEX1_1

SYS_FAN1 SYS_FAN2

SYS_FAN3

GA-Z87X-SLI

R_USB30

HDMI

F_USB3 F_USB2F_PANEL F_USB1COMA

SPDIF_IN

F_AUDIO

SPDIF_O

LPT

SATA3

5 3 1

4 2 0

Realtek

®

GbE LAN

iTE

®

Super I/O

PCIe to PCI

Bridge

- 8 -

GA-Z87X-SLI Motherboard Block Diagram

Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications."

iTE

®

Super I/O

PS/2 KB/Mouse

Intel

®

Z87

PCIe CLK

(100MHz)

PCIe CLK

(100MHz)

1 PCI Express x16

2 PCI Express x8

Dual BIOS

COM

LPT

8 USB 2.0/1.1

6 USB 3.0/2.0

PCI Express Bus

6 SATA 6Gb/s

HDMI

DVI-D

D-Sub

DMI 2.0

FDI

x16x16

x1

LAN

RJ45

Realtek

®

GbE LAN

LPC

Bus

3 PCI Express x1

x1 x1 x1

Switch

or

Center/Subwoofer Speaker Out

Line Out

MIC

Line In

S/PDIF Out

S/PDIF In

Side Speaker Out

Rear Speaker Out

CODEC

PCI Bus

x1

PCIe to PCI

Bridge

PCI CLK

(33MHz)

2 PCI

LGA1150

CPU

CPUCLK+/-(100MHz)

DDR31600/1333MHz

Dual Channel Memory

- 9 -

Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyreadtheuser's

manual and follow these procedures:

• Prior to installation, make sure the chassis is suitable for the motherboard.

• Priorto installation, do notremoveorbreak motherboard S/N(Serial Number)stickeror

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• Itisbesttowearanelectrostaticdischarge(ESD)wriststrapwhenhandlingelectroniccom-

ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep

yourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

• Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power supply

has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

- 10 -

Hardware Installation

1-2 ProductSpecications

CPU  Support for Intel

®

Core

™

i7 processors/Intel

®

Core

™

i5 processors/

Intel

®

Core

™

i3 processors/Intel

®

Pentium

®

processors/

Intel

®

Celeron

®

processors in the LGA1150 package

(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

 L3 cache varies with CPU

Chipset  Intel

®

Z87 Express Chipset

Memory  4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory

* DuetoaWindows32-bitoperatingsystemlimitation,whenmorethan4GBofphysical

memoryisinstalled,theactualmemorysizedisplayedwillbelessthanthesizeof

the physical memory installed.

 Dual channel memory architecture

 SupportforDDR31600/1333MHzmemorymodules

 Support for non-ECC memory modules

 SupportforExtremeMemoryProle(XMP)memorymodules

(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemory

modules.)

Onboard

Graphics

 Integrated Graphics Processor:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200

* TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160

* SupportforHDMI1.4aversion.

- Maximum shared memory of 1 GB

Audio

 Realtek

®

ALC892 codec

 HighDenitionAudio

 2/4/5.1/7.1-channel

 Support for S/PDIF In/Out

LAN

 Realtek

®

GbELANchip(10/100/1000Mbit)

Expansion Slots

 1xPCIExpressx16slot,runningatx16(PCIEX16)

* Foroptimumperformance,ifonlyonePCIExpressgraphicscardistobeinstalled,

be sure to install it in the PCIEX16 slot.

 1xPCIExpressx16slot,runningatx8(PCIEX8)

(ThePCIEX16andPCIEX8slotsconformtoPCIExpress3.0standard.)

* ThePCIEX8slotsharesbandwidthwiththePCIEX16slot.WhenthePCIEX8slotis

populated, the PCIEX16 slot will operate at up to x8 mode.

 3 x PCI Express x1 slots

(ThePCIExpressx1slotsconformtoPCIExpress2.0standard.)

 2 x PCI slots

Multi-Graphics

Technology

 Support for 2-Way AMD CrossFire

™

/NVIDIA

®

SLI

™

Technology

- 11 -

Hardware Installation

Storage Interface  Chipset:

- 6 x SATA 6Gb/s connectors

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

USB  Chipset:

- 6xUSB3.0/2.0ports(4portsonthebackpanel,2portsavailablethrough

theinternalUSBheader)

- 8xUSB2.0/1.1ports(2portsonthebackpanel,6portsavailablethrough

theinternalUSBheaders)

Internal

Connectors

 1 x 24-pin ATX main power connector

 1 x 8-pin ATX 12V power connector

 6 x SATA 6Gb/s connectors

 1 x CPU fan header

 3 x system fan headers

 1 x front panel header

 1 x front panel audio header

 1 x S/PDIF In header

 1 x S/PDIF Out header

 1 x USB 3.0/2.0 header

 3 x USB 2.0/1.1 headers

 1 x serial port header

 1 x parallel port header

 1 x Clear CMOS jumper

Back Panel

Connectors

 1 x PS/2 keyboard/mouse port

 1 x D-Sub port

 1 x DVI-D port

 1 x HDMI port

 4 x USB 3.0/2.0 ports

 2 x USB 2.0/1.1 ports

 1 x RJ-45 port

 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker

Out, Line In, Line Out, Mic In)

I/O Controller  iTE

®

I/O Controller Chip

Hardware

Monitor

 System voltage detection

 CPU/System temperature detection

 CPU/System fan speed detection

 CPU/System overheating warning

 CPU/System fan fail warning

 CPU/System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

- 12 -

Hardware Installation

BIOS  2 x 64 Mbit ash

 Use of licensed AMI UEFI BIOS

 Support for DualBIOS

™

 PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features  Support for Q-Flash

 Support for Xpress Install

 Support for APP Center

* Available applications in APP Center may differ by motherboard model. Supported

functions of each application may also differ depending on motherboard

specications.

- @BIOS

- EasyTune

- EZ Setup

- USB Blocker

- Smart TimeLock

- Smart Recovery 2

 Support for ON/OFF Charge

Bundled

Software

 Norton

®

Internet Security (OEM version)

 Intel

®

Rapid Start Technology

 Intel

®

Smart Connect Technology

 Intel

®

Smart Response Technology

Operating

System

 Support for Windows 8.1/8/7

Form Factor  ATX Form Factor; 30.5cm x 22.5cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

* Please visit the Support & Downloads\Utility page on GIGABYTE's website to check the supported operating system(s)

for the software listed in the "Unique Features" and "Bundled Software" columns.

- 13 -

Hardware Installation

1-3 Installing the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

(GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.)

• Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

• LocatethepinoneoftheCPU.TheCPUcannotbeinsertediforientedincorrectly.(Oryoumay

locatethenotchesonbothsidesoftheCPUandalignmentkeysontheCPUsocket.)

• Apply an even and thin layer of thermal grease on the surface of the CPU.

• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

• SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Notch

Alignment KeyAlignment Key

Notch

LGA1150 CPU

LGA1150 CPU Socket

Pin One Corner of the CPU Socket

Triangle Pin One Marking on the CPU

- 14 -

Hardware Installation

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

Step 1:

Gently press the CPU socket lever handle down

andawayfromthesocketwithyournger.Then

completely lift the CPU socket lever and the metal

load plate/plastic cover will be lifted as well.

Step 2:

HoldtheCPUwithyourthumbandindexngers.

AligntheCPUpinonemarking(triangle)withthe

pinonecorneroftheCPUsocket(oryoumayalign

theCPUnotcheswiththesocketalignmentkeys)

and gently insert the CPU into position.

Step 4:

Finally, secure the lever under its retention tab to

complete the installation of the CPU.

NOTE:

Hold the CPU socket lever by the handle, not the lever base portion.

• Before installing the CPU, make sure to turn off the computer and unplug the power cord from

the power outlet to prevent damage to the CPU.

• To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 3:

Once the CPU is properly inserted, carefully

replace the load plate. When replacing the load

plate, make sure the front end of the load plate

is under the shoulder screw. Then press the CPU

socket lever. The protective plastic cover may

pop off from the load plate during the process of

engagingthelever.Removethecover.(Savethe

cover properly and always replace it when the

CPUisnotinstalled.)

- 15 -

Hardware Installation

1-3-2 Installing the CPU Cooler

FollowthestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Thefollowingprocedureuses

Intel

®

boxedcoolerastheexamplecooler.)

Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU

cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

Step 5:

After the installation, check the back of the moth-

erboard. If the push pin is inserted as the picture

above shows, the installation is complete.

Step 6:

Finally, attach the power connector of the CPU

coolertotheCPUfanheader(CPU_FAN)onthe

motherboard.

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 2:

Before installing the cooler, note the direction of the

arrow sign onthemalepushpin.(Turningthe

push pin along the direction of arrow is to remove

thecooler,onthecontrary,istoinstall.)

Step 3:

Place the cooler atop the CPU, aligning the four

push pins through the pin holes on the mother-

board. Push down on the push pins diagonally.

Step 4:

You should hear a "click" when pushing down each

push pin. Check that the Male and Female push

pinsarejoinedclosely.(RefertoyourCPUcooler

installation manual for instructions on installing

thecooler.)

Male

Push Pin

Female

Push Pin

The Top

of Female

Push Pin

Direction of

the Arrow Sign

on the Male

Push Pin

- 16 -

Hardware Installation

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(GotoGIGABYTE'swebsiteforthelatestsupportedmemoryspeedsandmemorymodules.)

• Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4-1 DualChannelMemoryConguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology. After the

memoryisinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.Enabling

Dual Channel memory mode will double the original memory bandwidth.

The four DDR3 memory sockets are divided into two channels and each channel has two memory sockets as

following:

Channel A: DDR3_2, DDR3_4

Channel B: DDR3_1, DDR3_3

DualChannelMemoryCongurationsTable

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used and installed in the same colored DDR3

sockets. For optimum performance, when enabling Dual Channel mode with two memory modules,

we recommend that you install them in the DDR3_1 and DDR3_2 sockets.

(SS=Single-Sided,DS=Double-Sided,"--"=NoMemory)

DDR3_4 DDR3_2 DDR3_3 DDR3_1

Two Modules - - DS/SS - - DS/SS

DS/SS - - DS/SS - -

Four Modules DS/SS DS/SS DS/SS DS/SS

DDR3_4

DDR3_2

DDR3_3

DDR3_1

- 17 -

Hardware Installation

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are

not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard.

DDR3 DIMM

ADDR3memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall

your memory modules in the memory sockets.

Step 1:

Note the orientation of the memory module. Spread the retaining clips

at both ends of the memory socket. Place the memory module on the

socket.Asindicatedinthepictureontheleft,placeyourngerson

the top edge of the memory, push down on the memory and insert it

vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place when the

memory module is securely inserted.

Notch

- 18 -

Hardware Installation

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

• Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

• Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. Afterinstallingallexpansioncards,replacethechassiscover(s).

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your

expansioncard(s).

7. Install the driver provided with the expansion card in your operating system.

Example: Installing and Removing a PCI Express Graphics Card:

• Installing a Graphics Card:

Gently push down on the top edge of the card until

it is fully inserted into the PCI Express slot. Make

sure the card is securely seated in the slot and

does not rock.

• Removing the Card:

Gently push back on the lever on the slot and then lift the card straight out from

the slot.

PCI Express x1 Slot

PCI Express x16 Slot

PCI Slot

- 19 -

Hardware Installation

1-6 Setting up AMD CrossFire

™

/NVIDIA

®

SLI

™

Conguration

(Note) Thebridgeconnector(s)maybeneededornotdependingonyourgraphicscards.

Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and

driver version. Refer to the manual that came with your graphics cards for more information about

enabling CrossFire/SLI technology.

A. System Requirements

- Windows 8 or Windows 7 operating system

- A CrossFire/SLI-supported motherboard with two PCI Express x16 slots and correct driver

- Two CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver

- CrossFire

(Note)

/SLI bridge connector

- Apowersupplywithsufcientpowerisrecommended(Refertothemanualofyourgraphicscardsforthe

powerrequirement)

B. Connecting the Graphics Cards

Step 1:

Observe the steps in "1-5 Installing an Expansion Card" and install CrossFire graphics cards on the PCIEX16

and PCIEX8 slots.

Step 2:

Insert the CrossFire

(Note)

/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.

Step 3:

Plug the display cable into the graphics card on the PCIEX16 slot.

C.ConguringtheGraphicsCardDriver

C-1. To Enable CrossFire Function

After installing the graphics card driver in the operating system, go to

the AMD VISION Engine Control Center. Browse to Performance\

AMD CrossFireX

™

and ensure the Enable CrossFireX

™

check box is

selected. and click Apply.

C-2. To Enable SLI Function

After installing the graphics card driver in the operating system, go to

the NVIDIA Control Panel. Browse to the CongureSLI,Surround,

Physx screen and ensure Maximize 3D performance is enabled.

- 20 -

Hardware Installation

1-7 Back Panel Connectors

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(Theitemnamemaydifferdependingonyouroperatingsystem.Thescreenshotbelowisfrom

Windows8.)

In Windows 8, select All apps>Control Panel>Hardware and

Sound>Sound>Playback,setIntel(R) DisplayAudioto the

default playback device.

USB 2.0/1.1 Port

TheUSBport supportstheUSB 2.0/1.1 specication.Usethis portforUSB devices suchasa USB

keyboard/mouse,USBprinter,USBashdriveandetc.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200

(theactualresolutionssupporteddependonthemonitorbeingused).Connectamonitorthatsupports

D-Sub connection to this port.

DVI-D Port

(Note)

TheDVI-DportconformstotheDVI-Dspecicationandsupportsamaximumresolutionof1920x1200

(theactualresolutionssupporteddependonthemonitorbeingused).Connectamonitorthatsupports

DVI-D connection to this port.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD

MasterAudio formats.Italso supports upto192KHz/24bit 8-channelLPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 4096x2160, but the actual resolutions supported are dependent on the monitor being used.

(Note) TheDVI-DportdoesnotsupportD-Subconnectionbyadapter.

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent

an electrical short inside the cable connector.

Page is loading ...

Gigabyte GA-Z87X-SLI User manual

Gigabyte GA-Z87X-SLI User manual

Related papers

Other documents