CTC Union FRM220-CH02/NMC User manual

Type
User manual

This manual is also suitable for

www.ctcu.com
www.ctcu.com
FRM220 Slide-in Module Chassis
SNMP manageable 2-Slot Chassis
FRM220-CH02 / NMC
User Guide
Panel
Figure #2. Rear Panel of FRM220-CH02/NMC
Figure #1. Front Panel of FRM220-CH02/NMC
CTC Union Technologies Co., Ltd.
www.ctcu.com
Description
The FRM220 chassis product line includes various metal chassis sizes, which can
hold from one to twenty FRM220 slide-in modules. The FRM220-CH02/NMC is a
two slot chassis, which can be SNMP managed when installing one FRM220-NMC
Network Management Controller card into the chassis for Web, Telnet, Console
and SNMP management. The FRM220-CH02/NMC can be installed with either one
or two single width blades cards or one double width blade card. The available
power supplies are built-in AC, DC or AC+DC dual power. All types of FRM220
series cards can be installed into FRM220-CH02/NMC two slots chassis such as 10G,
2.7G 3R Transponder, 1E1/5E1/8E1 to Ethernet E1 Inverse Multiplexer, Ethernet
over Fiber, E1/T1, 35/X21/RS530 ber modem, POTS over ber, and RS485/422/232
ber converter.
Features
Two slot chassis for FRM220 line cards
Supports backplane connection between two slots
Telnet, Web, Console, SNMP manageable via NMC card
Supports either one or two single width blades or one double width blade.
Available in three types: built-in AC, DC, AC+DC.
Built-in heat sink cooling Fan
Slot 1: any single width blade card
Slot 2: NMC card for management or any single width blade for non-management
Slot 1
Slot 2
Power LED
CH02/NMC-DD CH02/NMC-AA CH02/NMC-AD CH02/NMC-DC CH02/NMC-AC
[email protected] www.ctcu.com
V.: 1.1
Slot Capacity :
2 slots chassis with SNMP Management via NMC card
LED Indications :
PWR 1 : Power 1 indicator
PWR 2 : Power 2 indicator
Specications
Power :
- FRM220-CH02/NMC-AC : chassis with built-in AC power
- FRM220-CH02/NMC-DC : chassis with built-in DC power
- FRM220-CH02/NMC-AD : chassis with built-in AC+DC power
- FRM220-CH02/NMC-AA : chassis with built-in AC+AC power
- FRM220-CH20/NMC-DD : chassis with built-in DC+DC power
- AC power supply : 100 ~ 240VDC ±10%
- DC power supply : 18 ~ 75VDC
Operation & Storage Temperature :
Operating Temperature : 0°C – 50°C
Storage Temperature : 0°C – 70°C
Humidity : 5 – 90%
Dimension : 200 x 168 x 45 (D x W x H)mm
Shipping Weight :
1300g
Emission / Safety :
FCC Part 15 Class A, CE Mark, RoHS
Power Consumption :
30W
www.ctcu.com[email protected]
www.ctcu.com
www.ctcu.com
Installation II
The FRM220-CH02/NMC, a two blade chassis, can be installed with
one single
width blade line card
into the chassis. All types of FRM220 series one module
line card can be installed in FRM220-CH02/NMC chassis, which included 10G
3R Transponder, 2.7G 3R Transponder, E1/5E1/8E1 Inverse multiplexer,
Ethernet over ber, E1/T1, 35/X21/RS530 ber modem, POTS over ber, and
RS485/422/232 ber converter. The FRM220-CH02/NMC slide-in chassis may be
applied in point to point applications or may be linked to a centrally located
FRM220 CH20 rack.
Installation II
FRM220-CH02/NMC standalone chassis have the option of adding wall mount
capability. Two
wall mount kits
are required for installing a single
standalone chassis on the wall. Each wall mount kit provides all the necessary
hardware for a complete installation.
Installation I
The FRM220-CH02/NMC, a two blade chassis, can be installed with one
double
width blade line card
into the chassis. All types of FRM220 series two modules
line card can be installed in FRM220-CH02/NMC chassis, which included
16E1/ET100 E1Inverse Multiplexer or FOM04 4ch E1/T1 Fiber Optical Multiplexer.
The FRM220-CH02/NMC slide-in chassis may be applied in point to point
applications or may be linked to a centrally located FRM220 CH20 rack.
LED Indicators
1-module Line Card
LED Indications :
PWR 1 : LED on/of f Power 1 is on / Power 1 is of f
PWR 2 : LED on/of f Power 2 is on / Power 2 is of f
NMC card for Web, Telnet,
SNMP Standalone management
NMC Card
NIC
2-module Line Card
[email protected] www.ctcu.com
V.: 1.1
Rack Mounting Option I
FRM220-CH02/NMC standalone chassis have the option of adding standard
EIA 19" rack mount capability.
The rack mount ear
provides for mounting a
single standalone chassis in a rack. Each rack mount ear kit provides all the
necessary hardware for a complete installation
Rack Mounting Option II
FRM220-CH02/NMC standalone chassis have the option of adding standard
EIA 19" rack mount capability.
The rack mount tray
provide for mounting
two standalone chassis in a rack. Each rack mount tray kit provides all the
necessary hardware for a complete installation.
Wall Mounting Option
FRM220-CH02/NMC standalone chassis have the option of adding wall
mount capability. Two
wall mount kits
are required for installing a single
standalone chassis on the wall. Each wall mount kit provides all the necessary
hardware for a complete installation.
Figure #3. Rack Mount Ear. Figure #5. Wall Mount Kit Installation, CH02/NMC
Figure #4. Rack Mount Tray.
  • Page 1 1
  • Page 2 2

CTC Union FRM220-CH02/NMC User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI