SUSSEX DWTA User manual

Brand: SUSSEX

Model: DWTA

Type: User manual

SUSSEX DWTA is a wall top assembly designed for dual-handle tapware installation in new or existing wall breeches. It allows for precise positioning of the tapware, ensuring optimal functionality and aesthetics. The assembly includes components like the handle assembly, locknut, spindle, and more. It enables customization of the spindle length to accommodate different wall thicknesses and provides guidelines for proper installation and alignment of the handles. The SUSSEX DWTA is suitable for use with standard plumbing wall breeches and is recommended for installation by licensed plumbers.

AS/NZS 3718:2005

LIC. 20081

W AT ER

RATING

Licence No.Licence No. 0124

Wat er Consu mpti on

The mor e

star s t he mor e

wa ter ef fici ent

w w w . w a t e rr a t i n g .g o v . a u

litre s p er minu te

When tes ted in accor dance w it h S tar dard A S/NZS 64 00

For mo re i nfo rma tion a nd to co mpar e

produ cts, r ef er t o:

A j oint go ver nmen t an d i ndus try pr ogr am

W AT ER

RATING

Wat er Consu mpti on

The mor e

star s t he mor e

wa ter ef fici ent

w w w . w a t e rr a t i n g . go v . a u

litre s pe r m inut e

When tes ted in accor dan ce w it h Stan dard AS/ NZS 6400

For mo re in for mat ion a nd t o com par e

produ cts,

refe r to :

8.5

A j oint go ver nmen t an d i ndus try pr ogr am

Licence No.Licence N o. 0124

WATER

RATING

Water Consumption

The mor e

stars the mo re

water efficient

www.waterrating.gov.au

litres per minute

When tested in accordance with Standard AS/NZS 6400

For more information and to compare

produ cts, refer to:

7.5

A joint government and industr y program

Licence No. 0124

POL Basin Set

POL Basin Mixer

POL Basin Mixer Extended

POL Sink Mixer

( Twin Handle )

W AT ER

RATING

Licence No.Licence No. 0124

Wat er Consu mpti on

The mor e

star s t he mor e

wa ter ef fici ent

w w w . w a t e rr a t i n g .g o v . a u

litre s p er minu te

When tes ted in accor dance w it h S tar dard A S/NZS 64 00

For mo re i nfo rma tion a nd to co mpar e

produ cts, r ef er t o:

5.5

A j oint go ver nmen t an d i ndus try pr ogr am

POL Sink Mixer

( Single Lever )

POL Shower Head

POL Hand Held Shower

-A standard Plumbing Wall Breech (not supplied) is to be used in conjunction with this Tapware.

-Secure a nogging 45mm (i) back from the front of the stud. Attach the Wall Breech to the nogging.

-Ensure the Breech Tap Seat Bodies are square and parallel between the Wall Studs.

-To fit correctly, the thickness of the finished Wall coverings is calculated between 20mm and 35mm (ii)

-The Tap Seat Body of the Breech MUST be a minimum of 10mm and a maximum of 30mm (iii) back from the

finished wall coverings.

-If the wall coverings and Tap Seat Body do not sit within the range specified. Please contact manufacturer.

-Remove the old Spindles and clean surrounding area.

-Use a re-seating tool to dress the Seat and ensure the Spindle Seat is clean, flat and free of any debris.

-Ensure the Breech Tap Seat Bodies are square and parallel between the Wall Studs.

-The Tap Seat Body of the Breech MUST be a minimum of 10mm and a maximum of 30mm (iii) back from the

finished wall coverings.

-If the finished wall coverings and Tap Seat Body do not sit within the range specified. Please contact

manufacturer.

-Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2021

-Recommended working water pressure 300 - 500 Kpa. Maximum water temperature is 65°C

-After installation, ensure that tapware functions correctly without leaks.

-Please ensure a copy of the Installation Instructions are left with the end user for future reference.

DWTA

Duet

Wall top assembly

Product code

Rough-in Option 1: Installing tapware into a new wall breech

Rough-in Option 2 : Installing into an existing wall breech

Plumber note

-(A) Handle Assembly (consisting of A1 - Handle, A2 - Spindle Adapter and A3 - Dress Ring).

-(B) 50mm Locknut.

-(C) Fibre Washer.

-(D) 90mm Spindle.

-(E) Spindle Sizing Guage

Product parts

While we aim to ensure the specifications shown are correct at time of printing, Sussex Taps reserves the right to make modifications without prior notice.

Always use the physical product for accurate measurements. Dimensions are subject to change without notice. All measurements are shown in millimetres.

sussextaps.com.au

Step 1

Screw Spindle (D) into the Tap Seat Body by hand until the seat is felt. Tighten with an

additional 1/3 turn of a spanner. DO NOT OVER TIGHTEN.

Fit Fibre Washer (C) and screw Locknut (B) onto Spindle (D) for measurement.

Step 2

Measure the amount of Locknut (B) protruding from the finished wall and mark the Locknut

flush with the wall. Remove Locknut for cutting.

Step 3

Cut and Deburr Locknut (B). Refit on Spindle (D) with Fibre Washer (C) and tightening well using

a tube spanner.

FIT OFF

Step 4

The Locknut (B) must be cut to be flush or slightly behind the finished wall, as per diagram.

sussextaps.com.au

Step 6

Thread the provided Spindle Sizing Guage (E) onto the Dress Ring (A3).

Step 5

Seal the wall penetration. Then screw the Dress Ring (A3) onto the Locknut (B) and secure using

a spanner.

Step 7

Cut Spindle (D) against the face of the Sizing Guage (E). Remove Guage and deburr the edges to

ensure the spindle adapter will fit.

Step 8

Ensure both spindles (D) are set to OFF position:

HOT = FULL TURN CLOCKWISE.

COLD = FULL TURN ANTICLOCKWISE.

sussextaps.com.au

Step 9

Fit the Spindle Adapter (A2) onto the end of the spindle (D). Now position and fit the handle (A1)

to engage the lever of the handle assembly.

Step 10

Ensure that the handle (A1) is horizontally aligned (See Handle Alignment from step 11) and

tighten by rotating the barrel whilst holding the handle lever. Rotate the barrel until it meets the

Dress Ring (A3).

Step 11

The handle must be affixed as shown with the standard “off” position in horizontal alignment.

Step 12

If the handle alignment requires adjustment, remove the Handle (A1) and Spindle Adapter (A2).

Rotate (A2) to engage a different position on the spindle and refit.

Repeat steps 10 and 12 until you reach alignment.

Fine-tuning Handle Alignment

SUSSEX DWTA User manual

SUSSEX DWTA User manual

Related papers

Other documents