Kogan KARVMWDNRCA User guide

Brand: Kogan

Model: KARVMWDNRCA

Category: Drive recorders

Type: User guide

Kogan KARVMWDNRCA is a feature-rich dashcam with a rearview mirror display, GPS tracking, and both front and rear-facing cameras. It offers a range of recording modes, including continuous recording, motion detection, and parking surveillance. The device has a built-in speaker and microphone for audio recording, and its large touchscreen display allows easy access to settings and playback. With its wide range of features, the Kogan KARVMWDNRCA is an ideal choice for anyone looking for a comprehensive dashcam solution.

REAR VIEW MIRROR WITH

DASH AND REVERSE CAMERA

KARVMWDNRCA

No.

Description

No.

Description

GPS (optional)

Setting

SD card slot

Power off

Camera interface

Playback

USB power

Format

Reset

Okay

Speaker

Main menu

Lens

Power switch

Video

Photo

OVERVIEW

Powering

Press the power button for 3 seconds to start up and press the power button again to shut

down.

1. Audio Recording: Press the button to start recording audio. The recording icon will

appear on the top-left corner.

2. Video Recording: Press the button to start recording video. The recording icon will

appear on the top-left corner.

3. Main Menu: Opens the main menu.

Note:

When the battery is low, the camera will prompt “low battery” and shut down

automatically.

Audio

Recording

Video

Recording

Main Menu

Recording

Lock

Front/Rear

Camera

Date/Time

Note:

A licensed auto-electrician is required to install this device.

OPERATION

4. Recording Lock: Pressing this button will lock the current recording until it is

pressed again. Locked videos will not be overridden by other recordings. If you

want to delete a locked recording, you can do so from the playback menu.

5. Date/Time: Displays the current date & time.

Main Menu (Full-Screen Touch)

Video: Opens the main video interface.

Photo: Switches to photo model.

Playback: Opens the playback menu.

Setting: Opens the settings menu.

Format: Deletes all data from the SD card.

Power-off: Turns the camera off.

Settings Menu

Resolution: Adjust the resolution of the video being recorded.

Image quality: Adjust the image quality of photos.

Audio: Adjust the audio volume.

Parking wake: Monitors for movement when parked.

TimeSet: Set the date and time.

Auto Power-off: Set up the auto power-off function.

Cyclic Record: Adjust the settings of cyclic recording.

Motion detect: Set up the motion detect function.

G sensor (optional): Set the gravity sensor (not available on all models).

Bepp sound: Turns the button sounds on/off.

Flicker: Adjust video settings to avoid light sources flickering.

Tft savers: View information about the SD card.

Playback Mode

Short press the home icon to enter the menu and select playback. Use the arrow icons to

select a file to replay and press the play icon to begin playback. Press the home icon again

to return to the main menu.

Reversing Camera

Firstly, the car charger must be connected to the recording unit and the red power line of

the rear camera must be internally wired to the reversing light indicator – this should be

carried out by a qualified mechanic.

When the reverse gear is engaged, the display will show the feed from the rear camera and

switch off when the car is no longer in reverse.

Parking Monitoring

After connecting the supplied hardwire kit, the parking monitoring function can be enabled.

If a vibration is detected while the camera is off (sensitivity can be set), the recorder will turn

on and record automatically before switching off.

Motion Detect

After connecting the supplied hardwire kit, the motion detect function can be manually

enabled. If movement is detected in the shooting area while the camera is on, the recorder

begins recording automatically before switching off.

Charging the Battery

The charging time is approximately 180 minutes. The charging symbol will illuminate while

charging and turn off automatically when charging is complete.

File format

M-JPEG

Video resolution

Maximum 1080p

Video format

AVI

Frequency

50Hz/60Hz

Power interface

5V1A

Battery

Built-in

SD card

High-speed SDHC standard SD card required (not supplied)

SPECIFICATIONS

1. Cannot record

Ensure there is free space and the SD card is not locked.

2. Recording automatically stops

This may be due to the high bandwidth requirements of HD video. Use a high-speed

SD card compatible with SDHC.

3. “File error” message upon playback

Recorded data is corrupt. Reformat the SD card.

4. Footage is blurry

Ensure lens is clean.

5. Sky, water, etc. are very dark in captured footage

Scenes with large contrast will affect the camera’s automatic exposure function.

Modify the “EV” value.

6. Colours are incorrect on cloudy days or indoor lighting

Ensure “White Balance” is set to automatic.

7. Distortion with horizontal stripes on recorded footage

Change from 60Hz to 50Hz or vice versa.

8. Camera crashes

Short press reset button to restart.

TROUBLESHOOTING

NOTES

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com

Kogan KARVMWDNRCA User guide

Brand: Kogan

Model: KARVMWDNRCA

Category: Drive recorders

Type: User guide

Download PDF

report

Kogan KARVMWDNRCA User guide

Kogan KARVMWDNRCA User guide

Related papers

Other documents