2. Lexie
  3. B1
B1

Lexie B1 Installation guide

  • Hello! I've reviewed the Lexie hearing aid receiver wire replacement guide. This document provides a step-by-step process on how to replace the receiver wire. As your assistant, I understand the content and I'm happy to answer any questions about the wire replacement process, dome attachment, or other aspects of the guide.
  • What should I do if the old receiver wire doesn't detach easily?
    How do I align the new receiver wire?
    How to ensure the dome is securely attached?
Lexie Hearing Aids
Powered by Bose
RECEIVER WIRE
REPLACEMENT GUIDE
We’re here to help.
For help,
call (779) 212-7334 and speak
to a Lexie Expert™ or go to
lexiehearing.com/us/support
Receiver
wire
Hearing aids Dome kit
(optional)
What you need:
Receiver
(red or blue)
Clear
plastic end
Identify the two ends of
the receiver wire.
Step 1:
On the hearing aids, find the
old receiver wire that has the
same color speaker as the
new cable (red or blue).
Step 2:
Firmly pull the old receiver
wire until it detaches from
the hearing aid body.
Note: You may have to
pull harder than expected.
Step 3:
Align the clear plastic end
of the new receiver wire
with the port on the
hearing aid body so the
red or blue marks line up.
Step 4:
Insert the receiver wire into
the hearing aid body until
you hear or feel a click.
Step 5:
Get a dome for the new
receiver wire. Either pick
your size from a dome kit
(available separately) or
firmly pull the dome off of
the old receiver wire.
OR
Step 6:
On the new receiver wire,
align the opening of the
dome with the receiver and
slide the dome onto the
receiver.
Step 7:
Gently tug the dome to
make sure it’s securely
fastened.
Note:
This helps prevent
the dome from falling off
in your ear canal.
Step 8:
Copyright © 2016-2022
hearX IP (Pty) Ltd.
44-0010-03, REV1
/